From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Tejun Heo <tj@kernel.org>,
linux-ide@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
rsarmah@amcc.com, Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 2/2] sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
Date: Tue, 3 Mar 2015 22:41:22 +0200 [thread overview]
Message-ID: <1425415282-3750-3-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1425415282-3750-1-git-send-email-andriy.shevchenko@linux.intel.com>
This patch re-uses hsdev->dev which is allocated on heap. Therefore, the
private structure, which is global variable, is reduced by one field.
In one case ap->dev is used and there it seems to be right decision.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/ata/sata_dwc_460ex.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 08cd63f..5ab4849 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -194,7 +194,6 @@ struct sata_dwc_host_priv {
void __iomem *scr_addr_sstatus;
u32 sata_dwc_sactive_issued ;
u32 sata_dwc_sactive_queued ;
- struct device *dwc_dev;
};
static struct sata_dwc_host_priv host_pvt;
@@ -252,16 +251,16 @@ static const char *get_dma_dir_descript(int dma_dir)
}
}
-static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+static void sata_dwc_tf_dump(struct ata_port *ap, struct ata_taskfile *tf)
{
- dev_vdbg(host_pvt.dwc_dev,
+ dev_vdbg(ap->dev,
"taskfile cmd: 0x%02x protocol: %s flags: 0x%lx device: %x\n",
tf->command, get_prot_descript(tf->protocol), tf->flags,
tf->device);
- dev_vdbg(host_pvt.dwc_dev,
+ dev_vdbg(ap->dev,
"feature: 0x%02x nsect: 0x%x lbal: 0x%x lbam: 0x%x lbah: 0x%x\n",
tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah);
- dev_vdbg(host_pvt.dwc_dev,
+ dev_vdbg(ap->dev,
"hob_feature: 0x%02x hob_nsect: 0x%x hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
tf->hob_lbah);
@@ -337,7 +336,7 @@ static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd
desc->callback = dma_dwc_xfer_done;
desc->callback_param = hsdev;
- dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d addr: %pad\n",
+ dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
__func__, qc->sg, qc->n_elem, &addr);
return desc;
@@ -687,7 +686,7 @@ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
* This should not happen, it indicates the driver is out of
* sync. If it does happen, clear dmacr anyway.
*/
- dev_err(host_pvt.dwc_dev,
+ dev_err(hsdev->dev,
"%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
__func__, tag, hsdevp->dma_pending[tag],
in_le32(&hsdev->sata_dwc_regs->dmacr));
@@ -779,7 +778,7 @@ static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
*/
out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
- dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+ dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
__func__, in_le32(&hsdev->sata_dwc_regs->intmr),
in_le32(&hsdev->sata_dwc_regs->errmr));
}
@@ -855,7 +854,7 @@ static int sata_dwc_port_start(struct ata_port *ap)
hsdevp->hsdev = hsdev;
hsdevp->dws = &sata_dwc_dma_dws;
- hsdevp->dws->dma_dev = host_pvt.dwc_dev;
+ hsdevp->dws->dma_dev = hsdev->dev;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
@@ -863,7 +862,7 @@ static int sata_dwc_port_start(struct ata_port *ap)
/* Acquire DMA channel */
hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
if (!hsdevp->chan) {
- dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
+ dev_err(hsdev->dev, "%s: dma channel unavailable\n",
__func__);
err = -EAGAIN;
goto CLEANUP_ALLOC;
@@ -990,7 +989,7 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
"%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s start_dma? %x\n",
__func__, qc, tag, qc->tf.command,
get_dma_dir_descript(qc->dma_dir), start_dma);
- sata_dwc_tf_dump(&(qc->tf));
+ sata_dwc_tf_dump(ap, &qc->tf);
if (start_dma) {
reg = core_scr_read(SCR_ERROR);
@@ -1244,7 +1243,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
}
/* Save dev for later use in dev_xxx() routines */
- host_pvt.dwc_dev = &ofdev->dev;
+ hsdev->dev = &ofdev->dev;
hsdev->dma->dev = &ofdev->dev;
--
2.1.4
next prev parent reply other threads:[~2015-03-03 20:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 20:41 [PATCH v1 0/2] sata_dwc_460ex: move to generic DMA driver Andy Shevchenko
2015-03-03 20:41 ` [PATCH v1 1/2] " Andy Shevchenko
2015-11-22 13:03 ` Måns Rullgård
2015-11-23 10:10 ` Andy Shevchenko
2015-11-23 11:58 ` Måns Rullgård
2015-03-03 20:41 ` Andy Shevchenko [this message]
2015-03-24 17:51 ` [PATCH v1 2/2] sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425415282-3750-3-git-send-email-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=Alexey.Brodkin@synopsys.com \
--cc=benh@kernel.crashing.org \
--cc=linux-ide@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=rsarmah@amcc.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).