From: Daniel Axtens <dja@axtens.net>
To: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Axtens <dja@axtens.net>
Subject: [PATCH v2 02/19] powerpc/powermac: move pmac_pci_probe_mode from setup.c to pci.c
Date: Tue, 31 Mar 2015 16:00:40 +1100 [thread overview]
Message-ID: <1427778057-9505-3-git-send-email-dja@axtens.net> (raw)
In-Reply-To: <1427778057-9505-1-git-send-email-dja@axtens.net>
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
arch/powerpc/platforms/powermac/pci.c | 17 +++++++++++++++++
arch/powerpc/platforms/powermac/pmac.h | 4 ++++
arch/powerpc/platforms/powermac/setup.c | 18 ------------------
3 files changed, 21 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index f4071a6..a792f45 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1223,3 +1223,20 @@ static void fixup_u4_pcie(struct pci_dev* dev)
pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie);
+
+#ifdef CONFIG_PPC64
+int pmac_pci_probe_mode(struct pci_bus *bus)
+{
+ struct device_node *node = pci_bus_to_OF_node(bus);
+
+ /* We need to use normal PCI probing for the AGP bus,
+ * since the device for the AGP bridge isn't in the tree.
+ * Same for the PCIe host on U4 and the HT host bridge.
+ */
+ if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
+ of_device_is_compatible(node, "u4-pcie") ||
+ of_device_is_compatible(node, "u3-ht")))
+ return PCI_PROBE_NORMAL;
+ return PCI_PROBE_DEVTREE;
+}
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 8327cce..46d2193 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -39,4 +39,8 @@ extern void low_cpu_die(void) __attribute__((noreturn));
extern int pmac_nvram_init(void);
extern void pmac_pic_init(void);
+#ifdef CONFIG_PPC64
+extern int pmac_pci_probe_mode(struct pci_bus *bus);
+#endif
+
#endif /* __PMAC_H__ */
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 713d36d..efe172d 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -637,24 +637,6 @@ static int __init pmac_probe(void)
return 1;
}
-#ifdef CONFIG_PPC64
-/* Move that to pci.c */
-static int pmac_pci_probe_mode(struct pci_bus *bus)
-{
- struct device_node *node = pci_bus_to_OF_node(bus);
-
- /* We need to use normal PCI probing for the AGP bus,
- * since the device for the AGP bridge isn't in the tree.
- * Same for the PCIe host on U4 and the HT host bridge.
- */
- if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
- of_device_is_compatible(node, "u4-pcie") ||
- of_device_is_compatible(node, "u3-ht")))
- return PCI_PROBE_NORMAL;
- return PCI_PROBE_DEVTREE;
-}
-#endif /* CONFIG_PPC64 */
-
define_machine(powermac) {
.name = "PowerMac",
.probe = pmac_probe,
--
2.1.4
next prev parent reply other threads:[~2015-03-31 5:01 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 5:00 [PATCH v2 00/19] Refactor PCI controller operations Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 01/19] powerpc: move find_and_init_phbs() to pSeries specific code Daniel Axtens
2015-03-31 5:00 ` Daniel Axtens [this message]
2015-03-31 5:00 ` [PATCH v2 03/19] powerpc: pcibios_enable_device_hook: return bool rather than int Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 04/19] powerpc: Create pci_controller_ops.dma_dev_setup and shim Daniel Axtens
2015-04-02 14:13 ` Arnd Bergmann
2015-04-07 0:31 ` Daniel Axtens
2015-04-07 7:44 ` Arnd Bergmann
2015-04-08 3:31 ` Michael Ellerman
2015-03-31 5:00 ` [PATCH v2 05/19] powerpc: Create pci_controller_ops.dma_bus_setup " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 06/19] powerpc: Create pci_controller_ops.probe_mode " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 07/19] powerpc: Create pci_controller_ops.enable_device_hook " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 08/19] powerpc: Create pci_controller_ops.window_alignment " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 09/19] powerpc: Create pci_controller_ops.reset_secondary_bus " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 10/19] powerpc: dart_iommu: optionally populate controller_ops on init Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 11/19] powerpc/powermac: Move controller ops from ppc_md to controller_ops Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 12/19] powerpc/pseries: " Daniel Axtens
2015-04-02 3:21 ` [PATCH v3 " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 13/19] powerpc/powernv: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 14/19] powerpc/pasemi: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 15/19] powerpc/maple: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 16/19] powerpc: fsl_pci, swiotlb: " Daniel Axtens
2015-04-10 0:11 ` [PATCH v3 " Daniel Axtens
2015-04-10 1:28 ` Scott Wood
2015-04-10 2:36 ` Daniel Axtens
2015-04-10 3:15 ` [PATCH v4 " Daniel Axtens
2015-04-10 3:18 ` Scott Wood
2015-03-31 5:00 ` [PATCH v2 17/19] powerpc/cell: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 18/19] powerpc: Remove shims for pci_controller_ops operations Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 19/19] powerpc: dart_iommu: Remove check for controller_ops == NULL case Daniel Axtens
2015-04-07 7:51 ` [PATCH v2 00/19] Refactor PCI controller operations Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427778057-9505-3-git-send-email-dja@axtens.net \
--to=dja@axtens.net \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).