From: Daniel Axtens <dja@axtens.net>
To: linuxppc-dev@lists.ozlabs.org
Cc: Daniel Axtens <dja@axtens.net>
Subject: [PATCH v2 04/19] powerpc: Create pci_controller_ops.dma_dev_setup and shim
Date: Tue, 31 Mar 2015 16:00:42 +1100 [thread overview]
Message-ID: <1427778057-9505-5-git-send-email-dja@axtens.net> (raw)
In-Reply-To: <1427778057-9505-1-git-send-email-dja@axtens.net>
Introduces the pci_controller_ops structure.
Add pci_controller_ops.dma_dev_setup, shadowing ppc_md.pci_dma_dev_setup.
Add a shim, and change the callsites to use the shim.
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
v1 --> v2:
- Better commit message
- Use phb in favour of hose
- Make shim name match ppc_md name, not pci_controller_ops name.
---
arch/powerpc/include/asm/pci-bridge.h | 21 +++++++++++++++++++++
arch/powerpc/kernel/pci-common.c | 3 +--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 546d036..347d49d 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -15,6 +15,13 @@
struct device_node;
/*
+ * PCI controller operations
+ */
+struct pci_controller_ops {
+ void (*dma_dev_setup)(struct pci_dev *dev);
+};
+
+/*
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
@@ -46,6 +53,7 @@ struct pci_controller {
resource_size_t isa_mem_phys;
resource_size_t isa_mem_size;
+ struct pci_controller_ops controller_ops;
struct pci_ops *ops;
unsigned int __iomem *cfg_addr;
void __iomem *cfg_data;
@@ -258,5 +266,18 @@ static inline int pcibios_vaddr_is_ioport(void __iomem *address)
}
#endif /* CONFIG_PCI */
+/*
+ * Shims to prefer pci_controller version over ppc_md where available.
+ */
+static inline void pci_dma_dev_setup(struct pci_dev *dev)
+{
+ struct pci_controller *phb = pci_bus_to_host(dev->bus);
+
+ if (phb->controller_ops.dma_dev_setup)
+ phb->controller_ops.dma_dev_setup(dev);
+ else if (ppc_md.pci_dma_dev_setup)
+ ppc_md.pci_dma_dev_setup(dev);
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 3d07d81..bce6356 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -969,8 +969,7 @@ static void pcibios_setup_device(struct pci_dev *dev)
set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
/* Additional platform DMA/iommu setup */
- if (ppc_md.pci_dma_dev_setup)
- ppc_md.pci_dma_dev_setup(dev);
+ pci_dma_dev_setup(dev);
/* Read default IRQs and fixup if necessary */
pci_read_irq_line(dev);
--
2.1.4
next prev parent reply other threads:[~2015-03-31 5:01 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 5:00 [PATCH v2 00/19] Refactor PCI controller operations Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 01/19] powerpc: move find_and_init_phbs() to pSeries specific code Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 02/19] powerpc/powermac: move pmac_pci_probe_mode from setup.c to pci.c Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 03/19] powerpc: pcibios_enable_device_hook: return bool rather than int Daniel Axtens
2015-03-31 5:00 ` Daniel Axtens [this message]
2015-04-02 14:13 ` [PATCH v2 04/19] powerpc: Create pci_controller_ops.dma_dev_setup and shim Arnd Bergmann
2015-04-07 0:31 ` Daniel Axtens
2015-04-07 7:44 ` Arnd Bergmann
2015-04-08 3:31 ` Michael Ellerman
2015-03-31 5:00 ` [PATCH v2 05/19] powerpc: Create pci_controller_ops.dma_bus_setup " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 06/19] powerpc: Create pci_controller_ops.probe_mode " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 07/19] powerpc: Create pci_controller_ops.enable_device_hook " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 08/19] powerpc: Create pci_controller_ops.window_alignment " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 09/19] powerpc: Create pci_controller_ops.reset_secondary_bus " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 10/19] powerpc: dart_iommu: optionally populate controller_ops on init Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 11/19] powerpc/powermac: Move controller ops from ppc_md to controller_ops Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 12/19] powerpc/pseries: " Daniel Axtens
2015-04-02 3:21 ` [PATCH v3 " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 13/19] powerpc/powernv: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 14/19] powerpc/pasemi: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 15/19] powerpc/maple: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 16/19] powerpc: fsl_pci, swiotlb: " Daniel Axtens
2015-04-10 0:11 ` [PATCH v3 " Daniel Axtens
2015-04-10 1:28 ` Scott Wood
2015-04-10 2:36 ` Daniel Axtens
2015-04-10 3:15 ` [PATCH v4 " Daniel Axtens
2015-04-10 3:18 ` Scott Wood
2015-03-31 5:00 ` [PATCH v2 17/19] powerpc/cell: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 18/19] powerpc: Remove shims for pci_controller_ops operations Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 19/19] powerpc: dart_iommu: Remove check for controller_ops == NULL case Daniel Axtens
2015-04-07 7:51 ` [PATCH v2 00/19] Refactor PCI controller operations Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427778057-9505-5-git-send-email-dja@axtens.net \
--to=dja@axtens.net \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).