From: Daniel Axtens <dja@axtens.net>
To: linuxppc-dev@ozlabs.org
Cc: Scott Wood <scottwood@freescale.com>, Daniel Axtens <dja@axtens.net>
Subject: [PATCH v4 16/19] powerpc: fsl_pci, swiotlb: Move controller ops from ppc_md to controller_ops
Date: Fri, 10 Apr 2015 13:15:47 +1000 [thread overview]
Message-ID: <1428635747-9754-1-git-send-email-dja@axtens.net> (raw)
In-Reply-To: <1428624718-13564-1-git-send-email-dja@axtens.net>
Move the installation of DMA operations out of swiotlb's subsys
initcall, and into the generic PCI controller operations struct.
These ops are installed conditionally, based on the ppc_swiotlb_enable
global. The global can be set in two places:
- swiotlb_detect_4g, which is always called at the arch initcall level
- setup_pci_atmu, which is called as part of the fsl_add_bridge and
fsl_pci_syscore_do_resume.
fsl_pci_syscore_do_resume is called late enough that any changes as a
result of that call will have no effect.
As such, if we test the global and set the operations as part of
fsl_add_bridge, after the call to setup_pci_atmu, we can be confident
that it will cover all the PCI implementations affected by the changes
to dma-swiotlb.c.
Signed-off-by: Daniel Axtens <dja@axtens.net>
---
v1 --> v2:
- Move the setup call to after setup_pci_atmu().
v2 --> v3:
- Only set the affected op, not the entire structure. Thanks mpe.
v3 --> v4:
- Improved commit message, thanks Scott Wood.
---
arch/powerpc/kernel/dma-swiotlb.c | 11 ++++-------
arch/powerpc/sysdev/fsl_pci.c | 15 +++++++++++++++
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 7359797..6e8d764 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -116,16 +116,13 @@ void __init swiotlb_detect_4g(void)
}
}
-static int __init swiotlb_late_init(void)
+static int __init check_swiotlb_enabled(void)
{
- if (ppc_swiotlb_enable) {
+ if (ppc_swiotlb_enable)
swiotlb_print_info();
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
- } else {
+ else
swiotlb_free();
- }
return 0;
}
-subsys_initcall(swiotlb_late_init);
+subsys_initcall(check_swiotlb_enabled);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4b74c27..9a8fcf0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -111,6 +111,18 @@ static struct pci_ops fsl_indirect_pcie_ops =
#define MAX_PHYS_ADDR_BITS 40
static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
+#ifdef CONFIG_SWIOTLB
+static void setup_swiotlb_ops(struct pci_controller *hose)
+{
+ if (ppc_swiotlb_enable) {
+ hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ }
+}
+#else
+static inline void setup_swiotlb_ops(struct pci_controller *hose) {}
+#endif
+
static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
{
if (!dev->dma_mask || !dma_supported(dev, dma_mask))
@@ -548,6 +560,9 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)
/* Setup PEX window registers */
setup_pci_atmu(hose);
+ /* Set up controller operations */
+ setup_swiotlb_ops(hose);
+
return 0;
no_bridge:
--
2.1.4
next prev parent reply other threads:[~2015-04-10 3:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 5:00 [PATCH v2 00/19] Refactor PCI controller operations Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 01/19] powerpc: move find_and_init_phbs() to pSeries specific code Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 02/19] powerpc/powermac: move pmac_pci_probe_mode from setup.c to pci.c Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 03/19] powerpc: pcibios_enable_device_hook: return bool rather than int Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 04/19] powerpc: Create pci_controller_ops.dma_dev_setup and shim Daniel Axtens
2015-04-02 14:13 ` Arnd Bergmann
2015-04-07 0:31 ` Daniel Axtens
2015-04-07 7:44 ` Arnd Bergmann
2015-04-08 3:31 ` Michael Ellerman
2015-03-31 5:00 ` [PATCH v2 05/19] powerpc: Create pci_controller_ops.dma_bus_setup " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 06/19] powerpc: Create pci_controller_ops.probe_mode " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 07/19] powerpc: Create pci_controller_ops.enable_device_hook " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 08/19] powerpc: Create pci_controller_ops.window_alignment " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 09/19] powerpc: Create pci_controller_ops.reset_secondary_bus " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 10/19] powerpc: dart_iommu: optionally populate controller_ops on init Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 11/19] powerpc/powermac: Move controller ops from ppc_md to controller_ops Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 12/19] powerpc/pseries: " Daniel Axtens
2015-04-02 3:21 ` [PATCH v3 " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 13/19] powerpc/powernv: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 14/19] powerpc/pasemi: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 15/19] powerpc/maple: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 16/19] powerpc: fsl_pci, swiotlb: " Daniel Axtens
2015-04-10 0:11 ` [PATCH v3 " Daniel Axtens
2015-04-10 1:28 ` Scott Wood
2015-04-10 2:36 ` Daniel Axtens
2015-04-10 3:15 ` Daniel Axtens [this message]
2015-04-10 3:18 ` [PATCH v4 " Scott Wood
2015-03-31 5:00 ` [PATCH v2 17/19] powerpc/cell: " Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 18/19] powerpc: Remove shims for pci_controller_ops operations Daniel Axtens
2015-03-31 5:00 ` [PATCH v2 19/19] powerpc: dart_iommu: Remove check for controller_ops == NULL case Daniel Axtens
2015-04-07 7:51 ` [PATCH v2 00/19] Refactor PCI controller operations Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428635747-9754-1-git-send-email-dja@axtens.net \
--to=dja@axtens.net \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).