From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v3 15/21] powerpc/powernv: Functions to get/reset PCI slot status
Date: Mon, 27 Apr 2015 16:37:47 +1000 [thread overview]
Message-ID: <1430116673-22500-16-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1430116673-22500-1-git-send-email-gwshan@linux.vnet.ibm.com>
The patch exports 3 functions, which base on corresponding OPAL
APIs to get or set PCI slot status. Those functions are going to
be used by PCI hotplug module in subsequent patches:
pnv_pci_get_presence_status() opal_pci_get_presence_status()
pnv_pci_get_power_status() opal_pci_get_power_status()
pnv_pci_set_power_status() opal_pci_set_power_status()
Besides, the patch also exports pnv_pci_hotplug_notifier() to allow
registering PCI hotplug notifier, which will be used to receive PCI
hotplug message from skiboot firmware.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/opal-api.h | 7 +++-
arch/powerpc/include/asm/opal.h | 3 ++
arch/powerpc/include/asm/pnv-pci.h | 5 +++
arch/powerpc/platforms/powernv/opal-wrappers.S | 3 ++
arch/powerpc/platforms/powernv/pci.c | 45 ++++++++++++++++++++++++++
5 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 0321a90..29b407d 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -153,7 +153,10 @@
#define OPAL_FLASH_READ 110
#define OPAL_FLASH_WRITE 111
#define OPAL_FLASH_ERASE 112
-#define OPAL_LAST 112
+#define OPAL_PCI_GET_PRESENCE_STATUS 116
+#define OPAL_PCI_GET_POWER_STATUS 117
+#define OPAL_PCI_SET_POWER_STATUS 118
+#define OPAL_LAST 118
/* Device tree flags */
@@ -352,6 +355,8 @@ enum opal_msg_type {
OPAL_MSG_SHUTDOWN, /* params[0] = 1 reboot, 0 shutdown */
OPAL_MSG_HMI_EVT,
OPAL_MSG_DPO,
+ OPAL_MSG_PRD,
+ OPAL_MSG_PCI_HOTPLUG,
OPAL_MSG_TYPE_MAX,
};
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 6d467df..a0eb206 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -200,6 +200,9 @@ int64_t opal_flash_write(uint64_t id, uint64_t offset, uint64_t buf,
uint64_t size, uint64_t token);
int64_t opal_flash_erase(uint64_t id, uint64_t offset, uint64_t size,
uint64_t token);
+int64_t opal_pci_get_presence_status(uint64_t id, uint8_t *status);
+int64_t opal_pci_get_power_status(uint64_t id, uint8_t *status);
+int64_t opal_pci_set_power_status(uint64_t id, uint8_t status);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index f9b4982..50d92a4 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -13,6 +13,11 @@
#include <linux/pci.h>
#include <misc/cxl.h>
+extern int pnv_pci_get_presence_status(uint64_t id, uint8_t *status);
+extern int pnv_pci_get_power_status(uint64_t id, uint8_t *status);
+extern int pnv_pci_set_power_status(uint64_t id, uint8_t status);
+extern int pnv_pci_hotplug_notifier(struct notifier_block *nb, bool enable);
+
int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode);
int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
unsigned int virq);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index a7ade94..aa95dcb 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -295,3 +295,6 @@ OPAL_CALL(opal_i2c_request, OPAL_I2C_REQUEST);
OPAL_CALL(opal_flash_read, OPAL_FLASH_READ);
OPAL_CALL(opal_flash_write, OPAL_FLASH_WRITE);
OPAL_CALL(opal_flash_erase, OPAL_FLASH_ERASE);
+OPAL_CALL(opal_pci_get_presence_status, OPAL_PCI_GET_PRESENCE_STATUS);
+OPAL_CALL(opal_pci_get_power_status, OPAL_PCI_GET_POWER_STATUS);
+OPAL_CALL(opal_pci_set_power_status, OPAL_PCI_SET_POWER_STATUS);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a2da9a3..60e6d65 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -60,6 +60,51 @@ int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval)
return rval ? -EIO : 0;
}
+int pnv_pci_get_presence_status(uint64_t id, uint8_t *status)
+{
+ long rc;
+
+ if (!opal_check_token(OPAL_PCI_GET_PRESENCE_STATUS))
+ return -ENXIO;
+
+ rc = opal_pci_get_presence_status(id, status);
+ return pnv_pci_poll(id, rc, status);
+}
+EXPORT_SYMBOL_GPL(pnv_pci_get_presence_status);
+
+int pnv_pci_get_power_status(uint64_t id, uint8_t *status)
+{
+ long rc;
+
+ if (!opal_check_token(OPAL_PCI_GET_POWER_STATUS))
+ return -ENXIO;
+
+ rc = opal_pci_get_power_status(id, status);
+ return pnv_pci_poll(id, rc, status);
+}
+EXPORT_SYMBOL_GPL(pnv_pci_get_power_status);
+
+int pnv_pci_set_power_status(uint64_t id, uint8_t status)
+{
+ long rc;
+
+ if (!opal_check_token(OPAL_PCI_SET_POWER_STATUS))
+ return -ENXIO;
+
+ rc = opal_pci_set_power_status(id, status);
+ return pnv_pci_poll(id, rc, NULL);
+}
+EXPORT_SYMBOL_GPL(pnv_pci_set_power_status);
+
+int pnv_pci_hotplug_notifier(struct notifier_block *nb, bool enable)
+{
+ if (enable)
+ return opal_message_notifier_register(OPAL_MSG_PCI_HOTPLUG, nb);
+
+ return opal_message_notifier_unregister(OPAL_MSG_PCI_HOTPLUG, nb);
+}
+EXPORT_SYMBOL_GPL(pnv_pci_hotplug_notifier);
+
#ifdef CONFIG_PCI_MSI
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
--
2.1.0
next prev parent reply other threads:[~2015-04-27 6:39 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-27 6:37 [PATCH v3 00/21] PowerPC/PowerNV: PCI Slot Management Gavin Shan
2015-04-27 6:37 ` [PATCH v3 01/21] pci: Add pcibios_setup_bridge() Gavin Shan
2015-04-27 6:37 ` [PATCH v3 02/21] powerpc/powernv: Enable M64 on P7IOC Gavin Shan
2015-04-27 6:37 ` [PATCH v3 03/21] powerpc/powernv: M64 support improvement Gavin Shan
2015-04-27 6:37 ` [PATCH v3 04/21] powerpc/powernv: Improve IO and M32 mapping Gavin Shan
2015-04-27 6:37 ` [PATCH v3 05/21] powerpc/powernv: Improve DMA32 segment assignment Gavin Shan
2015-04-27 6:37 ` [PATCH v3 06/21] powerpc/powernv: Create PEs dynamically Gavin Shan
2015-04-27 6:37 ` [PATCH v3 07/21] powerpc/powernv: Release " Gavin Shan
2015-04-27 6:37 ` [PATCH v3 08/21] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() Gavin Shan
2015-04-27 6:37 ` [PATCH v3 09/21] powerpc/eeh: Delay probing EEH device during hotplug Gavin Shan
2015-04-27 6:37 ` [PATCH v3 10/21] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2015-04-27 6:37 ` [PATCH v3 11/21] powerpc/powernv: Fundamental reset for PCI bus reset Gavin Shan
2015-04-27 6:37 ` [PATCH v3 12/21] powerpc/pci: Don't scan empty slot Gavin Shan
2015-04-27 6:37 ` [PATCH v3 13/21] powerpc/pci: Move pcibios_find_pci_bus() around Gavin Shan
2015-04-27 6:37 ` [PATCH v3 14/21] powerpc/powernv: Introduce pnv_pci_poll() Gavin Shan
2015-04-27 6:37 ` Gavin Shan [this message]
2015-04-27 6:37 ` [PATCH v3 16/21] powerpc/pci: Delay creating pci_dn Gavin Shan
2015-04-27 6:37 ` [PATCH v3 17/21] powerpc/pci: Create eeh_dev while " Gavin Shan
2015-04-27 6:37 ` [PATCH v3 18/21] powerpc/pci: Export traverse_pci_device_nodes() Gavin Shan
2015-04-27 6:37 ` [PATCH v3 19/21] powerpc/pci: Update bridge windows on PCI plugging Gavin Shan
2015-04-27 6:37 ` [PATCH v3 20/21] powerpc/powernv: Select OF_DYNAMIC Gavin Shan
2015-04-27 6:37 ` [PATCH v3 21/21] pci/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430116673-22500-16-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).