Re: [PATCH kernel v9 16/32] powerpc/powernv/ioda: Move TCE kill register address to PE

[Alex Williamson <alex.williamson@redhat.com>]

On Sat, 2015-04-25 at 22:14 +1000, Alexey Kardashevskiy wrote:
> At the moment the DMA setup code looks for the "ibm,opal-tce-kill" property
> which contains the TCE kill register address. Writes to this register
> invalidates TCE cache on IODA/IODA2 hub.
> 
> This moves the register address from iommu_table to pnv_ioda_pe as
> later there will be 2 tables per PE and it will be used for both tables.
> 
> This moves the property reading/remapping code to a helper to reduce
> code duplication.
> 
> This adds a new pnv_pci_ioda2_tvt_invalidate() helper which invalidates
> the entire table. It should be called after every call to
> opal_pci_map_pe_dma_window(). It was not required before because
> there is just a single TCE table and 64bit DMA is handled via bypass
> window (which has no table so no chache is used) but this is going
> to change with Dynamic DMA windows (DDW).
> 
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> Changes:
> v9:
> * new in the series
> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c | 69 +++++++++++++++++++------------
>  arch/powerpc/platforms/powernv/pci.h      |  1 +
>  2 files changed, 44 insertions(+), 26 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index f070c44..b22b3ca 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1672,7 +1672,7 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
>  			struct pnv_ioda_pe, table_group);
>  	__be64 __iomem *invalidate = rm ?
>  		(__be64 __iomem *)pe->tce_inval_reg_phys :
> -		(__be64 __iomem *)tbl->it_index;
> +		pe->tce_inval_reg;
>  	unsigned long start, end, inc;
>  	const unsigned shift = tbl->it_page_shift;
>  
> @@ -1743,6 +1743,18 @@ static struct iommu_table_ops pnv_ioda1_iommu_ops = {
>  	.get = pnv_tce_get,
>  };
>  
> +static inline void pnv_pci_ioda2_tvt_invalidate(struct pnv_ioda_pe *pe)
> +{
> +	/* 01xb - invalidate TCEs that match the specified PE# */
> +	unsigned long addr = (0x4ull << 60) | (pe->pe_number & 0xFF);
> +
> +	if (!pe->tce_inval_reg)
> +		return;
> +
> +        mb(); /* Ensure above stores are visible */


ERROR: code indent should use tabs where possible


> +	__raw_writeq(cpu_to_be64(addr), pe->tce_inval_reg);
> +}
> +
>  static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
>  		unsigned long index, unsigned long npages, bool rm)
>  {
> @@ -1751,7 +1763,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
>  	unsigned long start, end, inc;
>  	__be64 __iomem *invalidate = rm ?
>  		(__be64 __iomem *)pe->tce_inval_reg_phys :
> -		(__be64 __iomem *)tbl->it_index;
> +		pe->tce_inval_reg;
>  	const unsigned shift = tbl->it_page_shift;
>  
>  	/* We'll invalidate DMA address in PE scope */
> @@ -1803,13 +1815,31 @@ static struct iommu_table_ops pnv_ioda2_iommu_ops = {
>  	.get = pnv_tce_get,
>  };
>  
> +static void pnv_pci_ioda_setup_opal_tce_kill(struct pnv_phb *phb,
> +		struct pnv_ioda_pe *pe)
> +{
> +	const __be64 *swinvp;
> +
> +	/* OPAL variant of PHB3 invalidated TCEs */
> +	swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
> +	if (!swinvp)
> +		return;
> +
> +	/* We need a couple more fields -- an address and a data
> +	 * to or.  Since the bus is only printed out on table free
> +	 * errors, and on the first pass the data will be a relative
> +	 * bus number, print that out instead.
> +	 */
> +	pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
> +	pe->tce_inval_reg = ioremap(pe->tce_inval_reg_phys, 8);
> +}
> +
>  static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
>  				      struct pnv_ioda_pe *pe, unsigned int base,
>  				      unsigned int segs)
>  {
>  
>  	struct page *tce_mem = NULL;
> -	const __be64 *swinvp;
>  	struct iommu_table *tbl;
>  	unsigned int i;
>  	int64_t rc;
> @@ -1823,6 +1853,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
>  	if (WARN_ON(pe->tce32_seg >= 0))
>  		return;
>  
> +	pnv_pci_ioda_setup_opal_tce_kill(phb, pe);
> +
>  	/* Grab a 32-bit TCE table */
>  	pe->tce32_seg = base;
>  	pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
> @@ -1865,20 +1897,11 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
>  				  base << 28, IOMMU_PAGE_SHIFT_4K);
>  
>  	/* OPAL variant of P7IOC SW invalidated TCEs */
> -	swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
> -	if (swinvp) {
> -		/* We need a couple more fields -- an address and a data
> -		 * to or.  Since the bus is only printed out on table free
> -		 * errors, and on the first pass the data will be a relative
> -		 * bus number, print that out instead.
> -		 */
> -		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
> -		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
> -				8);
> +	if (pe->tce_inval_reg)
>  		tbl->it_type |= (TCE_PCI_SWINV_CREATE |
>  				 TCE_PCI_SWINV_FREE   |
>  				 TCE_PCI_SWINV_PAIR);
> -	}
> +
>  	tbl->it_ops = &pnv_ioda1_iommu_ops;
>  	iommu_init_table(tbl, phb->hose->node);
>  
> @@ -1984,7 +2007,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
>  {
>  	struct page *tce_mem = NULL;
>  	void *addr;
> -	const __be64 *swinvp;
>  	struct iommu_table *tbl;
>  	unsigned int tce_table_size, end;
>  	int64_t rc;
> @@ -1993,6 +2015,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
>  	if (WARN_ON(pe->tce32_seg >= 0))
>  		return;
>  
> +	pnv_pci_ioda_setup_opal_tce_kill(phb, pe);
> +
>  	/* The PE will reserve all possible 32-bits space */
>  	pe->tce32_seg = 0;
>  	end = (1 << ilog2(phb->ioda.m32_pci_base));
> @@ -2023,6 +2047,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
>  		goto fail;
>  	}
>  
> +	pnv_pci_ioda2_tvt_invalidate(pe);
> +
>  	/* Setup iommu */
>  	pe->table_group.tables[0].it_table_group = &pe->table_group;
>  
> @@ -2032,18 +2058,9 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
>  			IOMMU_PAGE_SHIFT_4K);
>  
>  	/* OPAL variant of PHB3 invalidated TCEs */
> -	swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
> -	if (swinvp) {
> -		/* We need a couple more fields -- an address and a data
> -		 * to or.  Since the bus is only printed out on table free
> -		 * errors, and on the first pass the data will be a relative
> -		 * bus number, print that out instead.
> -		 */
> -		pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
> -		tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
> -				8);
> +	if (pe->tce_inval_reg)
>  		tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
> -	}
> +
>  	tbl->it_ops = &pnv_ioda2_iommu_ops;
>  	iommu_init_table(tbl, phb->hose->node);
>  #ifdef CONFIG_IOMMU_API
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 368d4ed..bd83d85 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -59,6 +59,7 @@ struct pnv_ioda_pe {
>  	int			tce32_segcount;
>  	struct iommu_table_group table_group;
>  	phys_addr_t		tce_inval_reg_phys;
> +	__be64 __iomem		*tce_inval_reg;
>  
>  	/* 64-bit TCE bypass region */
>  	bool			tce_bypass_enabled;