From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v4 15/21] powerpc/pci: Delay creating pci_dn
Date: Fri, 1 May 2015 16:03:02 +1000 [thread overview]
Message-ID: <1430460188-31343-16-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1430460188-31343-1-git-send-email-gwshan@linux.vnet.ibm.com>
The pci_dn instances are allocated from memblock or bootmem when
creating PCI controller (hoses) in setup_arch(). The PCI hotplug,
which will be supported by proceeding patches, will release PCI
device nodes and their corresponding pci_dn on unplugging event.
The pci_dn instance memory chunks alloed from memblock or bootmem
are hard to reused after being released.
The patch delay creating pci_dn so that they can be allocated from
slab. In turn, the memory chunks for them can be reused after being
released without problem. The creation of eeh_dev instances, which
depends on pci_dn, is delayed a bit as well.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/ppc-pci.h | 1 -
arch/powerpc/kernel/eeh_dev.c | 2 +-
arch/powerpc/kernel/pci_dn.c | 40 +++++++++++++++++++---------------
arch/powerpc/platforms/maple/pci.c | 35 +++++++++++++++++------------
arch/powerpc/platforms/pasemi/pci.c | 3 ---
arch/powerpc/platforms/powermac/pci.c | 39 ++++++++++++++++++++-------------
arch/powerpc/platforms/powernv/pci.c | 3 ---
arch/powerpc/platforms/pseries/setup.c | 1 -
8 files changed, 68 insertions(+), 56 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 4122a86..7388316 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -40,7 +40,6 @@ void *traverse_pci_dn(struct pci_dn *root,
void *(*fn)(struct pci_dn *, void *),
void *data);
-extern void pci_devs_phb_init(void);
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
/* From rtas_pci.h */
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index aabba94..f33ce5b 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -110,4 +110,4 @@ static int __init eeh_dev_phb_init(void)
return 0;
}
-core_initcall(eeh_dev_phb_init);
+core_initcall_sync(eeh_dev_phb_init);
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index b3b4df9..d3833af 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -277,7 +277,7 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
struct device_node *parent;
struct pci_dn *pdn;
- pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+ pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
if (pdn == NULL)
return NULL;
dn->data = pdn;
@@ -442,33 +442,37 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
traverse_pci_devices(dn, update_dn_pci_info, phb);
}
-/**
+static void pci_dev_pdn_setup(struct pci_dev *pdev)
+{
+ struct pci_dn *pdn;
+
+ if (pdev->dev.archdata.pci_data)
+ return;
+
+ /* Setup the fast path */
+ pdn = pci_get_pdn(pdev);
+ pdev->dev.archdata.pci_data = pdn;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pci_dev_pdn_setup);
+
+/*
* pci_devs_phb_init - Initialize phbs and pci devs under them.
- *
- * This routine walks over all phb's (pci-host bridges) on the
- * system, and sets up assorted pci-related structures
+ *
+ * This routine walks over all phb's (pci-host bridges) on
+ * the system, and sets up assorted pci-related structures
* (including pci info in the device node structs) for each
* pci device found underneath. This routine runs once,
* early in the boot sequence.
*/
-void __init pci_devs_phb_init(void)
+static int __init pci_devs_phb_init(void)
{
struct pci_controller *phb, *tmp;
/* This must be done first so the device nodes have valid pci info! */
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
pci_devs_phb_init_dynamic(phb);
-}
-
-static void pci_dev_pdn_setup(struct pci_dev *pdev)
-{
- struct pci_dn *pdn;
- if (pdev->dev.archdata.pci_data)
- return;
-
- /* Setup the fast path */
- pdn = pci_get_pdn(pdev);
- pdev->dev.archdata.pci_data = pdn;
+ return 0;
}
-DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, pci_dev_pdn_setup);
+
+core_initcall(pci_devs_phb_init);
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a923230..04a69a8 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -568,6 +568,26 @@ void maple_pci_irq_fixup(struct pci_dev *dev)
DBG(" <- maple_pci_irq_fixup\n");
}
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+
void __init maple_pci_init(void)
{
struct device_node *np, *root;
@@ -605,20 +625,7 @@ void __init maple_pci_init(void)
if (ht && maple_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
-
+ ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
/* Tell pci.c to not change any resource allocations. */
pci_add_flags(PCI_PROBE_ONLY);
}
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index f3a68a0..10c4e8f 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -229,9 +229,6 @@ void __init pas_pci_init(void)
of_node_get(np);
of_node_put(root);
-
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
}
void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 59ab16f..368716f 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -878,6 +878,29 @@ void pmac_pci_irq_fixup(struct pci_dev *dev)
#endif /* CONFIG_PPC32 */
}
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_hot_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions for now. We should do something better in the
+ * future though
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+#endif /* CONFIG_PPC64 */
+
void __init pmac_pci_init(void)
{
struct device_node *np, *root;
@@ -914,22 +937,8 @@ void __init pmac_pci_init(void)
if (ht && pmac_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions for now. We should do something better in the
- * future though
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
/* pmac_check_ht_link(); */
-
+ ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
#else /* CONFIG_PPC64 */
init_p2pbridge();
init_second_ohare();
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 60e6d65..21a4eb3 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -819,9 +819,6 @@ void __init pnv_pci_init(void)
for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
pnv_pci_init_ioda2_phb(np);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
/* Configure IOMMU DMA hooks */
ppc_md.tce_build = pnv_tce_build_vm;
ppc_md.tce_free = pnv_tce_free_vm;
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index df6a704..5f80758 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -482,7 +482,6 @@ static void __init find_and_init_phbs(void)
}
of_node_put(root);
- pci_devs_phb_init();
/*
* PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
--
2.1.0
next prev parent reply other threads:[~2015-05-01 6:04 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 6:02 [PATCH v4 00/21] PowerPC/PowerNV: PCI Slot Management Gavin Shan
2015-05-01 6:02 ` [PATCH v4 01/21] pci: Add pcibios_setup_bridge() Gavin Shan
2015-05-07 22:12 ` Bjorn Helgaas
2015-05-11 1:59 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 02/21] powerpc/powernv: Enable M64 on P7IOC Gavin Shan
2015-05-09 0:18 ` Alexey Kardashevskiy
2015-05-11 4:37 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 03/21] powerpc/powernv: M64 support improvement Gavin Shan
2015-05-09 10:24 ` Alexey Kardashevskiy
2015-05-11 4:47 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 04/21] powerpc/powernv: Improve IO and M32 mapping Gavin Shan
2015-05-09 10:53 ` Alexey Kardashevskiy
2015-05-11 4:52 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 05/21] powerpc/powernv: Improve DMA32 segment assignment Gavin Shan
2015-05-01 6:02 ` [PATCH v4 06/21] powerpc/powernv: Create PEs dynamically Gavin Shan
2015-05-09 11:43 ` Alexey Kardashevskiy
2015-05-11 4:55 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 07/21] powerpc/powernv: Release " Gavin Shan
2015-05-09 12:43 ` Alexey Kardashevskiy
2015-05-11 6:25 ` Gavin Shan
2015-05-11 7:02 ` Alexey Kardashevskiy
2015-05-12 0:03 ` Gavin Shan
2015-05-12 0:53 ` Alexey Kardashevskiy
2015-05-12 1:25 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 08/21] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() Gavin Shan
2015-05-09 12:45 ` Alexey Kardashevskiy
2015-05-01 6:02 ` [PATCH v4 09/21] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2015-05-09 13:41 ` Alexey Kardashevskiy
2015-05-11 6:45 ` Gavin Shan
2015-05-11 7:16 ` Alexey Kardashevskiy
2015-05-01 6:02 ` [PATCH v4 10/21] powerpc/powernv: Fundamental reset for PCI bus reset Gavin Shan
2015-05-09 14:12 ` Alexey Kardashevskiy
2015-05-11 6:47 ` Gavin Shan
2015-05-11 7:17 ` Alexey Kardashevskiy
2015-05-12 0:04 ` Gavin Shan
2015-05-01 6:02 ` [PATCH v4 11/21] powerpc/pci: Don't scan empty slot Gavin Shan
2015-05-01 6:02 ` [PATCH v4 12/21] powerpc/pci: Move pcibios_find_pci_bus() around Gavin Shan
2015-05-01 6:03 ` [PATCH v4 13/21] powerpc/powernv: Introduce pnv_pci_poll() Gavin Shan
2015-05-09 14:30 ` Alexey Kardashevskiy
2015-05-11 7:19 ` Gavin Shan
2015-05-01 6:03 ` [PATCH v4 14/21] powerpc/powernv: Functions to get/reset PCI slot status Gavin Shan
2015-05-09 14:44 ` Alexey Kardashevskiy
2015-05-01 6:03 ` Gavin Shan [this message]
2015-05-09 14:55 ` [PATCH v4 15/21] powerpc/pci: Delay creating pci_dn Alexey Kardashevskiy
2015-05-11 7:21 ` Gavin Shan
2015-05-01 6:03 ` [PATCH v4 16/21] powerpc/pci: Create eeh_dev while " Gavin Shan
2015-05-09 15:08 ` Alexey Kardashevskiy
2015-05-11 7:24 ` Gavin Shan
2015-05-01 6:03 ` [PATCH v4 17/21] powerpc/pci: Export traverse_pci_device_nodes() Gavin Shan
2015-05-01 6:03 ` [PATCH v4 18/21] powerpc/pci: Update bridge windows on PCI plugging Gavin Shan
2015-05-01 6:03 ` [PATCH v4 19/21] drivers/of: Support adding sub-tree Gavin Shan
2015-05-01 12:54 ` Rob Herring
2015-05-01 15:22 ` Benjamin Herrenschmidt
2015-05-01 18:46 ` Rob Herring
2015-05-01 22:57 ` Benjamin Herrenschmidt
2015-05-01 23:29 ` Benjamin Herrenschmidt
2015-05-02 2:48 ` Benjamin Herrenschmidt
2015-05-04 1:30 ` Gavin Shan
2015-05-04 4:51 ` Benjamin Herrenschmidt
2015-05-04 0:23 ` Gavin Shan
2015-05-04 16:41 ` Pantelis Antoniou
2015-05-04 21:14 ` Benjamin Herrenschmidt
2015-05-13 23:35 ` Benjamin Herrenschmidt
2015-05-14 0:18 ` Rob Herring
2015-05-14 0:54 ` Benjamin Herrenschmidt
2015-05-14 6:23 ` Pantelis Antoniou
2015-05-14 6:46 ` Benjamin Herrenschmidt
2015-05-14 7:04 ` Pantelis Antoniou
2015-05-14 7:14 ` Benjamin Herrenschmidt
2015-05-14 7:19 ` Pantelis Antoniou
2015-05-14 7:25 ` Benjamin Herrenschmidt
2015-05-14 7:29 ` Benjamin Herrenschmidt
2015-05-14 7:34 ` Pantelis Antoniou
2015-05-14 7:47 ` Benjamin Herrenschmidt
2015-05-14 11:02 ` Pantelis Antoniou
2015-05-14 23:25 ` Benjamin Herrenschmidt
2015-06-07 7:54 ` Grant Likely
2015-06-08 20:57 ` Benjamin Herrenschmidt
2015-06-08 21:34 ` Grant Likely
2015-06-10 6:55 ` Gavin Shan
2015-05-03 23:28 ` Gavin Shan
2015-05-15 1:27 ` Gavin Shan
2015-05-01 6:03 ` [PATCH v4 20/21] powerpc/powernv: Select OF_DYNAMIC Gavin Shan
2015-05-01 6:03 ` [PATCH v4 21/21] pci/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2015-05-09 15:54 ` Alexey Kardashevskiy
2015-05-11 7:38 ` Gavin Shan
2015-05-08 23:59 ` [PATCH v4 00/21] PowerPC/PowerNV: PCI Slot Management Alexey Kardashevskiy
2015-05-11 7:40 ` Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430460188-31343-16-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).