From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: gwshan@linux.vnet.ibm.com, bhelgaas@google.com
Cc: linux-pci@vger.kernel.org, Wei Yang <weiyang@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH V5 01/10] pci/iov: rename and export virtfn_add/virtfn_remove
Date: Fri, 15 May 2015 21:36:55 +0800 [thread overview]
Message-ID: <1431697024-5710-2-git-send-email-weiyang@linux.vnet.ibm.com> (raw)
In-Reply-To: <1431697024-5710-1-git-send-email-weiyang@linux.vnet.ibm.com>
During the EEH recovery, when a device's driver is not EEH aware or no
driver is bound with a device, EEH core would do hotplug on this device.
While it isn't feasible for a VF with usual hotplug procedure. During
removal of a VF, virtual bus should be removed if necessary. During the
re-creation, the pci_scan_slot() doesn't work on a VF.
This patch exports two functions to handle the hotplug case for VF
properly. They will be invoked when the EEH core does the hotplug case for
VFs.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
drivers/pci/iov.c | 10 +++++-----
include/linux/pci.h | 2 ++
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 47daf2f..f353e6f 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -106,7 +106,7 @@ resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
}
-static int virtfn_add(struct pci_dev *dev, int id, int reset)
+int pci_iov_virtfn_add(struct pci_dev *dev, int id, int reset)
{
int i;
int rc = -ENOMEM;
@@ -181,7 +181,7 @@ failed:
return rc;
}
-static void virtfn_remove(struct pci_dev *dev, int id, int reset)
+void pci_iov_virtfn_remove(struct pci_dev *dev, int id, int reset)
{
struct pci_dev *virtfn;
@@ -302,7 +302,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
}
for (i = 0; i < initial; i++) {
- rc = virtfn_add(dev, i, 0);
+ rc = pci_iov_virtfn_add(dev, i, 0);
if (rc)
goto failed;
}
@@ -314,7 +314,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
failed:
for (j = 0; j < i; j++)
- virtfn_remove(dev, j, 0);
+ pci_iov_virtfn_remove(dev, j, 0);
iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
pci_cfg_access_lock(dev);
@@ -343,7 +343,7 @@ static void sriov_disable(struct pci_dev *dev)
return;
for (i = 0; i < iov->num_VFs; i++)
- virtfn_remove(dev, i, 0);
+ pci_iov_virtfn_remove(dev, i, 0);
pcibios_sriov_disable(dev);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 353db8d..94bacfa 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1679,6 +1679,8 @@ int pci_iov_virtfn_devfn(struct pci_dev *dev, int id);
int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
void pci_disable_sriov(struct pci_dev *dev);
+int pci_iov_virtfn_add(struct pci_dev *dev, int id, int reset);
+void pci_iov_virtfn_remove(struct pci_dev *dev, int id, int reset);
int pci_num_vf(struct pci_dev *dev);
int pci_vfs_assigned(struct pci_dev *dev);
int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
--
1.7.9.5
next prev parent reply other threads:[~2015-05-15 13:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 13:36 [PATCH V5 00/10] VF EEH on Power8 Wei Yang
2015-05-15 13:36 ` Wei Yang [this message]
2015-05-15 13:36 ` [PATCH V5 02/10] powerpc/pci_dn: cache vf_index in pci_dn Wei Yang
2015-05-15 13:36 ` [PATCH V5 03/10] powerpc/pci: remove PCI devices in reverse order Wei Yang
2015-05-15 13:36 ` [PATCH V5 04/10] powerpc/eeh: cache address range just for normal device Wei Yang
2015-05-15 13:36 ` [PATCH V5 05/10] powerpc/powernv: create/release eeh_dev for VF Wei Yang
2015-05-15 13:37 ` [PATCH V5 06/10] powerpc/eeh: create EEH_PE_VF for VF PE Wei Yang
2015-05-15 13:37 ` [PATCH V5 07/10] powerpc/powernv: Support EEH reset for VFs Wei Yang
2015-05-15 13:37 ` [PATCH V5 08/10] powerpc/powernv: Support PCI config restore " Wei Yang
2015-05-15 13:37 ` [PATCH V5 09/10] powerpc/eeh: handle VF PE properly Wei Yang
2015-05-15 13:37 ` [PATCH V5 10/10] powerpc/powernv: compound PE for VFs Wei Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431697024-5710-2-git-send-email-weiyang@linux.vnet.ibm.com \
--to=weiyang@linux.vnet.ibm.com \
--cc=bhelgaas@google.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).