* [PATCH] powerpc/corenet: enable eSDHC @ 2015-05-06 6:29 Yangbo Lu 2015-05-30 0:03 ` Scott Wood 0 siblings, 1 reply; 8+ messages in thread From: Yangbo Lu @ 2015-05-06 6:29 UTC (permalink / raw) To: linuxppc-dev, linux-kernel, scottwood; +Cc: Yangbo Lu Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> --- arch/powerpc/configs/corenet32_smp_defconfig | 2 ++ arch/powerpc/configs/corenet64_smp_defconfig | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index ca7957b..17fb2e0 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -130,6 +130,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 04737aa..4605a55 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -112,6 +112,8 @@ CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y -- 2.1.0.27.g96db324 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: powerpc/corenet: enable eSDHC 2015-05-06 6:29 [PATCH] powerpc/corenet: enable eSDHC Yangbo Lu @ 2015-05-30 0:03 ` Scott Wood 2015-06-08 10:12 ` Lu Y.B. 0 siblings, 1 reply; 8+ messages in thread From: Scott Wood @ 2015-05-30 0:03 UTC (permalink / raw) To: Yangbo Lu; +Cc: linuxppc-dev, linux-mmc On Wed, May 06, 2015 at 02:29:08PM +0800, Yangbo Lu wrote: > Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> > --- > arch/powerpc/configs/corenet32_smp_defconfig | 2 ++ > arch/powerpc/configs/corenet64_smp_defconfig | 2 ++ > 2 files changed, 4 insertions(+) > > diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig > index ca7957b..17fb2e0 100644 > --- a/arch/powerpc/configs/corenet32_smp_defconfig > +++ b/arch/powerpc/configs/corenet32_smp_defconfig > @@ -130,6 +130,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y > CONFIG_USB_STORAGE=y > CONFIG_MMC=y > CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_SDHCI_OF_ESDHC=y > CONFIG_EDAC=y > CONFIG_EDAC_MM_EDAC=y > CONFIG_EDAC_MPC85XX=y > diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig > index 04737aa..4605a55 100644 > --- a/arch/powerpc/configs/corenet64_smp_defconfig > +++ b/arch/powerpc/configs/corenet64_smp_defconfig > @@ -112,6 +112,8 @@ CONFIG_USB_EHCI_FSL=y > CONFIG_USB_STORAGE=y > CONFIG_MMC=y > CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_SDHCI_OF_ESDHC=y > CONFIG_EDAC=y > CONFIG_EDAC_MM_EDAC=y > CONFIG_RTC_CLASS=y With this on t4240rdb I'm continually spammed with: sdhci-esdhc ffe114000.sdhc: no support for card's volts mmc0: error -22 whilst initialising SD card sdhci-esdhc ffe114000.sdhc: no support for card's volts mmc0: error -22 whilst initialising SD card Releveant boot messages include: sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc ffe114000.sdhc: No vmmc regulator found sdhci-esdhc ffe114000.sdhc: No vqmmc regulator found mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA ... mmc0: error -22 whilst initialising SD card ... sdhci-esdhc ffe114000.sdhc: no support for card's volts mmc0: error -22 whilst initialising SD card -Scott ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: powerpc/corenet: enable eSDHC 2015-05-30 0:03 ` Scott Wood @ 2015-06-08 10:12 ` Lu Y.B. 2015-06-08 20:30 ` Scott Wood 0 siblings, 1 reply; 8+ messages in thread From: Lu Y.B. @ 2015-06-08 10:12 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org Thanks a lot, Scott. And now a patch was merged on git://git.linaro.org/people/ulf.hansson/mmc.g= it next branch to fix this issue. It should be no problem. >From 5fd26c7ecb32082745b0bd33c8e35badd1cb5a91 Mon Sep 17 00:00:00 2001 From: Ulf Hansson <ulf.hansson@linaro.org> Date: Fri, 5 Jun 2015 11:40:08 +0200 Subject: [PATCH] mmc: sdhci: Restore behavior while creating OCR mask Commit 3a48edc4bd68 ("mmc: sdhci: Use mmc core regulator infrastucture") changed the behavior for how to assign the ocr_avail mask for the mmc host. More precisely it started to mask the bits instead of assigning them. Restore the behavior, but also make it clear that an OCR mask created from an external regulator overrides the other ones. The OCR mask is determined by one of the following with this priority: 1. Supported ranges of external regulator if one supplies VDD 2. Host OCR mask if set by the driver (based on DT properties) 3. The capabilities reported by the controller itself Fixes: 3a48edc4bd68 ("mmc: sdhci: Use mmc core regulator infrastucture") Cc: Tim Kryger <tim.kryger@gmail.com> Reported-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@gmail.com> --- drivers/mmc/host/sdhci.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 1b4861d..706bb60 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3256,13 +3256,14 @@ int sdhci_add_host(struct sdhci_host *host) SDHCI_MAX_CURRENT_MULTIPLIER; } =20 - /* If OCR set by external regulators, use it instead */ + /* If OCR set by host, use it instead. */ + if (host->ocr_mask) + ocr_avail =3D host->ocr_mask; + + /* If OCR set by external regulators, give it highest prio. */ if (mmc->ocr_avail) ocr_avail =3D mmc->ocr_avail; =20 - if (host->ocr_mask) - ocr_avail &=3D host->ocr_mask; - mmc->ocr_avail =3D ocr_avail; mmc->ocr_avail_sdio =3D ocr_avail; if (host->ocr_avail_sdio) --=20 2.1.0.27.g96db324 Best regards, Yangbo Lu > -----Original Message----- > From: Wood Scott-B07421 > Sent: Saturday, May 30, 2015 8:04 AM > To: Lu Yangbo-B47093 > Cc: linuxppc-dev@lists.ozlabs.org; linux-mmc@vger.kernel.org > Subject: Re: powerpc/corenet: enable eSDHC >=20 > On Wed, May 06, 2015 at 02:29:08PM +0800, Yangbo Lu wrote: > > Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> > > --- > > arch/powerpc/configs/corenet32_smp_defconfig | 2 ++ > > arch/powerpc/configs/corenet64_smp_defconfig | 2 ++ > > 2 files changed, 4 insertions(+) > > > > diff --git a/arch/powerpc/configs/corenet32_smp_defconfig > > b/arch/powerpc/configs/corenet32_smp_defconfig > > index ca7957b..17fb2e0 100644 > > --- a/arch/powerpc/configs/corenet32_smp_defconfig > > +++ b/arch/powerpc/configs/corenet32_smp_defconfig > > @@ -130,6 +130,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=3Dy > > CONFIG_USB_STORAGE=3Dy CONFIG_MMC=3Dy CONFIG_MMC_SDHCI=3Dy > > +CONFIG_MMC_SDHCI_PLTFM=3Dy > > +CONFIG_MMC_SDHCI_OF_ESDHC=3Dy > > CONFIG_EDAC=3Dy > > CONFIG_EDAC_MM_EDAC=3Dy > > CONFIG_EDAC_MPC85XX=3Dy > > diff --git a/arch/powerpc/configs/corenet64_smp_defconfig > > b/arch/powerpc/configs/corenet64_smp_defconfig > > index 04737aa..4605a55 100644 > > --- a/arch/powerpc/configs/corenet64_smp_defconfig > > +++ b/arch/powerpc/configs/corenet64_smp_defconfig > > @@ -112,6 +112,8 @@ CONFIG_USB_EHCI_FSL=3Dy CONFIG_USB_STORAGE=3Dy > > CONFIG_MMC=3Dy CONFIG_MMC_SDHCI=3Dy > > +CONFIG_MMC_SDHCI_PLTFM=3Dy > > +CONFIG_MMC_SDHCI_OF_ESDHC=3Dy > > CONFIG_EDAC=3Dy > > CONFIG_EDAC_MM_EDAC=3Dy > > CONFIG_RTC_CLASS=3Dy >=20 > With this on t4240rdb I'm continually spammed with: > sdhci-esdhc ffe114000.sdhc: no support for card's volts > mmc0: error -22 whilst initialising SD card sdhci-esdhc ffe114000.sdhc: > no support for card's volts > mmc0: error -22 whilst initialising SD card >=20 > Releveant boot messages include: > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc > ffe114000.sdhc: No vmmc regulator found sdhci-esdhc ffe114000.sdhc: No > vqmmc regulator found > mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA ... > mmc0: error -22 whilst initialising SD card ... > sdhci-esdhc ffe114000.sdhc: no support for card's volts > mmc0: error -22 whilst initialising SD card >=20 > -Scott ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: powerpc/corenet: enable eSDHC 2015-06-08 10:12 ` Lu Y.B. @ 2015-06-08 20:30 ` Scott Wood 2015-07-16 2:37 ` Lu Y.B. 0 siblings, 1 reply; 8+ messages in thread From: Scott Wood @ 2015-06-08 20:30 UTC (permalink / raw) To: Lu Yangbo-B47093; +Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org On Mon, 2015-06-08 at 05:12 -0500, Lu Yangbo-B47093 wrote: > Thanks a lot, Scott. > And now a patch was merged on > git://git.linaro.org/people/ulf.hansson/mmc.git next branch to fix > this issue. > It should be no problem. Assuming that patch fixes it and gets pulled for 4.2, this config patch can go in for 4.3. That said, it would be nice if, apart from fixing the problem itself, the MMC code failed more gracefully instead of endlessly repeating and filling up the log/console. -Scott ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: powerpc/corenet: enable eSDHC 2015-06-08 20:30 ` Scott Wood @ 2015-07-16 2:37 ` Lu Y.B. 2015-07-16 20:30 ` Scott Wood 0 siblings, 1 reply; 8+ messages in thread From: Lu Y.B. @ 2015-07-16 2:37 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org SGkgU2NvdHQsDQoNCk5vdyB0aGUgcGF0Y2ggYmVsb3cgaGFzIGJlZW4gbWVyZ2VkIG9uIGdpdDov L2dpdC5rZXJuZWwub3JnL3B1Yi9zY20vbGludXgva2VybmVsL2dpdC90b3J2YWxkcy9saW51eC5n aXQuDQpUaGlzIGlzc3VlIHNob3VsZCBoYXZlIGJlZW4gcmVzb2x2ZWQuIA0KVGhhbmtzLg0KDQoN CmNvbW1pdCA1ZmQyNmM3ZWNiMzIwODI3NDViMGJkMzNjOGUzNWJhZGQxY2I1YTkxDQpBdXRob3I6 IFVsZiBIYW5zc29uIDx1bGYuaGFuc3NvbkBsaW5hcm8ub3JnPg0KRGF0ZTogICBGcmkgSnVuIDUg MTE6NDA6MDggMjAxNSArMDIwMA0KDQogICAgbW1jOiBzZGhjaTogUmVzdG9yZSBiZWhhdmlvciB3 aGlsZSBjcmVhdGluZyBPQ1IgbWFzaw0KDQoNCj4gLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0N Cj4gRnJvbTogV29vZCBTY290dC1CMDc0MjENCj4gU2VudDogVHVlc2RheSwgSnVuZSAwOSwgMjAx NSA0OjMxIEFNDQo+IFRvOiBMdSBZYW5nYm8tQjQ3MDkzDQo+IENjOiBsaW51eHBwYy1kZXZAbGlz dHMub3psYWJzLm9yZzsgbGludXgtbW1jQHZnZXIua2VybmVsLm9yZw0KPiBTdWJqZWN0OiBSZTog cG93ZXJwYy9jb3JlbmV0OiBlbmFibGUgZVNESEMNCj4gDQo+IE9uIE1vbiwgMjAxNS0wNi0wOCBh dCAwNToxMiAtMDUwMCwgTHUgWWFuZ2JvLUI0NzA5MyB3cm90ZToNCj4gPiBUaGFua3MgYSBsb3Qs IFNjb3R0Lg0KPiA+IEFuZCBub3cgYSBwYXRjaCB3YXMgbWVyZ2VkIG9uDQo+ID4gZ2l0Oi8vZ2l0 LmxpbmFyby5vcmcvcGVvcGxlL3VsZi5oYW5zc29uL21tYy5naXQgbmV4dCBicmFuY2ggdG8gZml4 DQo+ID4gdGhpcyBpc3N1ZS4NCj4gPiBJdCBzaG91bGQgYmUgbm8gcHJvYmxlbS4NCj4gDQo+IEFz c3VtaW5nIHRoYXQgcGF0Y2ggZml4ZXMgaXQgYW5kIGdldHMgcHVsbGVkIGZvciA0LjIsIHRoaXMg Y29uZmlnIHBhdGNoDQo+IGNhbiBnbyBpbiBmb3IgNC4zLg0KPiANCj4gVGhhdCBzYWlkLCBpdCB3 b3VsZCBiZSBuaWNlIGlmLCBhcGFydCBmcm9tIGZpeGluZyB0aGUgcHJvYmxlbSBpdHNlbGYsIHRo ZQ0KPiBNTUMgY29kZSBmYWlsZWQgbW9yZSBncmFjZWZ1bGx5IGluc3RlYWQgb2YgZW5kbGVzc2x5 IHJlcGVhdGluZyBhbmQNCj4gZmlsbGluZyB1cCB0aGUgbG9nL2NvbnNvbGUuDQo+IA0KPiAtU2Nv dHQNCg0K ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: powerpc/corenet: enable eSDHC 2015-07-16 2:37 ` Lu Y.B. @ 2015-07-16 20:30 ` Scott Wood 2015-07-20 6:43 ` Lu Y.B. 0 siblings, 1 reply; 8+ messages in thread From: Scott Wood @ 2015-07-16 20:30 UTC (permalink / raw) To: Lu Yangbo-B47093; +Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org OK, thanks. Assuming no similar issues when testing, I'll apply this patch the next time I do a batch of patch application. Any thoughts regarding better error handling? -Scott On Wed, 2015-07-15 at 21:37 -0500, Lu Yangbo-B47093 wrote: > Hi Scott, > > Now the patch below has been merged on > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git. > This issue should have been resolved. > Thanks. > > > commit 5fd26c7ecb32082745b0bd33c8e35badd1cb5a91 > Author: Ulf Hansson <ulf.hansson@linaro.org> > Date: Fri Jun 5 11:40:08 2015 +0200 > > mmc: sdhci: Restore behavior while creating OCR mask > > > > -----Original Message----- > > From: Wood Scott-B07421 > > Sent: Tuesday, June 09, 2015 4:31 AM > > To: Lu Yangbo-B47093 > > Cc: linuxppc-dev@lists.ozlabs.org; linux-mmc@vger.kernel.org > > Subject: Re: powerpc/corenet: enable eSDHC > > > > On Mon, 2015-06-08 at 05:12 -0500, Lu Yangbo-B47093 wrote: > > > Thanks a lot, Scott. > > > And now a patch was merged on > > > git://git.linaro.org/people/ulf.hansson/mmc.git next branch to fix > > > this issue. > > > It should be no problem. > > > > Assuming that patch fixes it and gets pulled for 4.2, this config patch > > can go in for 4.3. > > > > That said, it would be nice if, apart from fixing the problem itself, the > > MMC code failed more gracefully instead of endlessly repeating and > > filling up the log/console. > > > > -Scott > ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: powerpc/corenet: enable eSDHC 2015-07-16 20:30 ` Scott Wood @ 2015-07-20 6:43 ` Lu Y.B. 2015-07-24 15:09 ` Scott Wood 0 siblings, 1 reply; 8+ messages in thread From: Lu Y.B. @ 2015-07-20 6:43 UTC (permalink / raw) To: Scott Wood; +Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org PiBPSywgdGhhbmtzLiAgQXNzdW1pbmcgbm8gc2ltaWxhciBpc3N1ZXMgd2hlbiB0ZXN0aW5nLCBJ J2xsIGFwcGx5IHRoaXMNCj4gcGF0Y2ggdGhlIG5leHQgdGltZSBJIGRvIGEgYmF0Y2ggb2YgcGF0 Y2ggYXBwbGljYXRpb24uDQo+IA0KPiBBbnkgdGhvdWdodHMgcmVnYXJkaW5nIGJldHRlciBlcnJv ciBoYW5kbGluZz8NCj4gDQo+IC1TY290dA0KDQpEbyB5b3UgbWVhbiBTRCB0ZXN0Pw0KQWN0dWFs bHkgU0QgcGF0Y2hlcyBuZWVkaW5nIHRvIHNlbnQgdG8gdXBzdHJlYW0gYXJlIHRlc3RlZCBvbiBM aSBZYW5nJ3MgTGludXggdHJlZS4NCkFuZCB0aGUgSklSQSB0aWNrZXQgaXMgUU9SSVFMVS0xOS4N Cg0KDQo+IA0KPiBPbiBXZWQsIDIwMTUtMDctMTUgYXQgMjE6MzcgLTA1MDAsIEx1IFlhbmdiby1C NDcwOTMgd3JvdGU6DQo+ID4gSGkgU2NvdHQsDQo+ID4NCj4gPiBOb3cgdGhlIHBhdGNoIGJlbG93 IGhhcyBiZWVuIG1lcmdlZCBvbg0KPiA+IGdpdDovL2dpdC5rZXJuZWwub3JnL3B1Yi9zY20vbGlu dXgva2VybmVsL2dpdC90b3J2YWxkcy9saW51eC5naXQuDQo+ID4gVGhpcyBpc3N1ZSBzaG91bGQg aGF2ZSBiZWVuIHJlc29sdmVkLg0KPiA+IFRoYW5rcy4NCj4gPg0KPiA+DQo+ID4gY29tbWl0IDVm ZDI2YzdlY2IzMjA4Mjc0NWIwYmQzM2M4ZTM1YmFkZDFjYjVhOTENCj4gPiBBdXRob3I6IFVsZiBI YW5zc29uIDx1bGYuaGFuc3NvbkBsaW5hcm8ub3JnPg0KPiA+IERhdGU6ICAgRnJpIEp1biA1IDEx OjQwOjA4IDIwMTUgKzAyMDANCj4gPg0KPiA+ICAgICBtbWM6IHNkaGNpOiBSZXN0b3JlIGJlaGF2 aW9yIHdoaWxlIGNyZWF0aW5nIE9DUiBtYXNrDQo+ID4NCj4gPg0KPiA+ID4gLS0tLS1PcmlnaW5h bCBNZXNzYWdlLS0tLS0NCj4gPiA+IEZyb206IFdvb2QgU2NvdHQtQjA3NDIxDQo+ID4gPiBTZW50 OiBUdWVzZGF5LCBKdW5lIDA5LCAyMDE1IDQ6MzEgQU0NCj4gPiA+IFRvOiBMdSBZYW5nYm8tQjQ3 MDkzDQo+ID4gPiBDYzogbGludXhwcGMtZGV2QGxpc3RzLm96bGFicy5vcmc7IGxpbnV4LW1tY0B2 Z2VyLmtlcm5lbC5vcmcNCj4gPiA+IFN1YmplY3Q6IFJlOiBwb3dlcnBjL2NvcmVuZXQ6IGVuYWJs ZSBlU0RIQw0KPiA+ID4NCj4gPiA+IE9uIE1vbiwgMjAxNS0wNi0wOCBhdCAwNToxMiAtMDUwMCwg THUgWWFuZ2JvLUI0NzA5MyB3cm90ZToNCj4gPiA+ID4gVGhhbmtzIGEgbG90LCBTY290dC4NCj4g PiA+ID4gQW5kIG5vdyBhIHBhdGNoIHdhcyBtZXJnZWQgb24NCj4gPiA+ID4gZ2l0Oi8vZ2l0Lmxp bmFyby5vcmcvcGVvcGxlL3VsZi5oYW5zc29uL21tYy5naXQgbmV4dCBicmFuY2ggdG8gZml4DQo+ ID4gPiA+IHRoaXMgaXNzdWUuDQo+ID4gPiA+IEl0IHNob3VsZCBiZSBubyBwcm9ibGVtLg0KPiA+ ID4NCj4gPiA+IEFzc3VtaW5nIHRoYXQgcGF0Y2ggZml4ZXMgaXQgYW5kIGdldHMgcHVsbGVkIGZv ciA0LjIsIHRoaXMgY29uZmlnDQo+ID4gPiBwYXRjaCBjYW4gZ28gaW4gZm9yIDQuMy4NCj4gPiA+ DQo+ID4gPiBUaGF0IHNhaWQsIGl0IHdvdWxkIGJlIG5pY2UgaWYsIGFwYXJ0IGZyb20gZml4aW5n IHRoZSBwcm9ibGVtDQo+ID4gPiBpdHNlbGYsIHRoZSBNTUMgY29kZSBmYWlsZWQgbW9yZSBncmFj ZWZ1bGx5IGluc3RlYWQgb2YgZW5kbGVzc2x5DQo+ID4gPiByZXBlYXRpbmcgYW5kIGZpbGxpbmcg dXAgdGhlIGxvZy9jb25zb2xlLg0KPiA+ID4NCj4gPiA+IC1TY290dA0KPiA+DQo= ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: powerpc/corenet: enable eSDHC 2015-07-20 6:43 ` Lu Y.B. @ 2015-07-24 15:09 ` Scott Wood 0 siblings, 0 replies; 8+ messages in thread From: Scott Wood @ 2015-07-24 15:09 UTC (permalink / raw) To: Lu Yangbo-B47093; +Cc: linuxppc-dev@lists.ozlabs.org, linux-mmc@vger.kernel.org On Mon, 2015-07-20 at 01:43 -0500, Lu Yangbo-B47093 wrote: > > OK, thanks. Assuming no similar issues when testing, I'll apply this > > patch the next time I do a batch of patch application. > > > > Any thoughts regarding better error handling? > > > > -Scott > > Do you mean SD test? I just mean that I will verify that enabling the option doesn't make things worse. > Actually SD patches needing to sent to upstream are tested on Li Yang's > Linux tree. I thought you said the patch was already merged. > And the JIRA ticket is QORIQLU-19. Don't reference internal tickets on upstream lists. -Scott ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-07-24 15:09 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-05-06 6:29 [PATCH] powerpc/corenet: enable eSDHC Yangbo Lu 2015-05-30 0:03 ` Scott Wood 2015-06-08 10:12 ` Lu Y.B. 2015-06-08 20:30 ` Scott Wood 2015-07-16 2:37 ` Lu Y.B. 2015-07-16 20:30 ` Scott Wood 2015-07-20 6:43 ` Lu Y.B. 2015-07-24 15:09 ` Scott Wood
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).