From: Scott Wood <scottwood@freescale.com>
To: Yuantian.Tang@freescale.com
Cc: b07421@freescale.com, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Chenhui Zhao <chenhui.zhao@freescale.com>
Subject: Re: [PATCH v4] powerpc/rcpm: add RCPM driver
Date: Thu, 25 Jun 2015 23:16:32 -0500 [thread overview]
Message-ID: <1435292192.6524.16.camel@freescale.com> (raw)
In-Reply-To: <1435046827-7683-1-git-send-email-Yuantian.Tang@freescale.com>
On Tue, 2015-06-23 at 16:07 +0800, Yuantian.Tang@freescale.com wrote:
> From: Tang Yuantian <Yuantian.Tang@freescale.com>
>
> There is a RCPM (Run Control/Power Management) in Freescale QorIQ
> series processors. The device performs tasks associated with device
> run control and power management.
>
> The driver implements some features: mask/unmask irq, enter/exit low
> power states, freeze time base, etc.
>
> Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> ---
> v4:
> - refine bindings document
> v3:
> - added static and __init modifier to fsl_rcpm_init
> v2:
> - fix code style issues
> - refine compatible string match part
>
> Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 42 +++
> arch/powerpc/include/asm/fsl_guts.h | 105 +++++++
> arch/powerpc/include/asm/fsl_pm.h | 48 +++
> arch/powerpc/platforms/85xx/Kconfig | 1 +
> arch/powerpc/sysdev/Kconfig | 5 +
> arch/powerpc/sysdev/Makefile | 1 +
> arch/powerpc/sysdev/fsl_rcpm.c | 338
> +++++++++++++++++++++
> 7 files changed, 540 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> create mode 100644 arch/powerpc/include/asm/fsl_pm.h
> create mode 100644 arch/powerpc/sysdev/fsl_rcpm.c
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> new file mode 100644
> index 0000000..1f58018
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> @@ -0,0 +1,42 @@
> +* Run Control and Power Management
> +
> +The RCPM performs all device-level tasks associated with device run control
> +and power management.
> +
> +Required properites:
> + - reg : Offset and length of the register set of RCPM block.
> + - compatible : Sould contain a chip-specific RCPM block compatible string
> + and (if applicable) may contain a chassis-version RCPM compatible string.
> + Chip-specific strings are of the form "fsl,<chip>-rcpm", such as:
> + * "fsl,p2041-rcpm"
> + * "fsl,p3041-rcpm"
> + * "fsl,p4080-rcpm"
> + * "fsl,p5020-rcpm"
> + * "fsl,p5040-rcpm"
> + * "fsl,t4240-rcpm"
> + * "fsl,b4420-rcpm"
> + * "fsl,b4860-rcpm"
> +
> + Chassis-version RCPM strings include:
> + * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
> + * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
> +
> +All references to "1.0" and "2.0" refer to the QorIQ chassis version to
> +which the chip complies.
> +Chassis Version Example Chips
> +--------------- -------------------------------
> +1.0 p4080, p5020, p5040, p2041, p3041
> +2.0 t4240, b4860, t1040, b4420
I don't think it's accurate to call t1040 chassis 2.0.
-Scott
prev parent reply other threads:[~2015-06-26 4:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-23 8:07 [PATCH v4] powerpc/rcpm: add RCPM driver Yuantian.Tang
2015-06-26 4:16 ` Scott Wood [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435292192.6524.16.camel@freescale.com \
--to=scottwood@freescale.com \
--cc=Yuantian.Tang@freescale.com \
--cc=b07421@freescale.com \
--cc=chenhui.zhao@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).