linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
To: linuxppc-dev@ozlabs.org, thuth@redhat.com, segher@kernel.crashing.org
Cc: aik@ozlabs.ru, dvaleev@suse.com, nikunj@linux.vnet.ibm.com
Subject: [PATCH SLOF v3 5/5] disk-label: add support for booting from GPT FAT partition
Date: Tue, 30 Jun 2015 16:31:21 +0530	[thread overview]
Message-ID: <1435662081-4293-6-git-send-email-nikunj@linux.vnet.ibm.com> (raw)
In-Reply-To: <1435662081-4293-1-git-send-email-nikunj@linux.vnet.ibm.com>

For a GPT+LVM combination disk, older bootloader that does not support
LVM, cannot load kernel from LVM.

The patch adds support to read from BASIC_DATA UUID partitions for the
case that the OS installer has installed the CHRP-BOOT config on a FAT
file system.

Makes GPT detection robust
* Check for Protective MBR Magic
* Check for valid GPT Signature
* Boundary check for allocated block size before reading into the
  buffer

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
---
 slof/fs/packages/disk-label.fs | 99 +++++++++++++++++++++++++++++++++---------
 1 file changed, 79 insertions(+), 20 deletions(-)

diff --git a/slof/fs/packages/disk-label.fs b/slof/fs/packages/disk-label.fs
index 347dc5d..5267ddb 100644
--- a/slof/fs/packages/disk-label.fs
+++ b/slof/fs/packages/disk-label.fs
@@ -179,7 +179,8 @@ CONSTANT /gpt-part-entry
 \ This word returns true if the currently loaded disk-buf has _NO_ GPT partition id
 : no-gpt? ( -- true|false )
    0 read-disk-buf
-   1 partition>part-entry part-entry>id c@ ee <>
+   1 partition>part-entry part-entry>id c@ ee <> IF true EXIT THEN
+   disk-buf mbr>magic w@-le aa55 <>
 ;
 
 : pc-extended-partition? ( part-entry-addr -- true|false )
@@ -267,7 +268,10 @@ CONSTANT /gpt-part-entry
 
 : try-dos-partition ( -- okay? )
    \ Read partition table and check magic.
-   no-mbr? IF cr ." No DOS disk-label found." cr false EXIT THEN
+   no-mbr? IF
+       debug-disk-label? IF cr ." No DOS disk-label found." cr THEN
+       false EXIT
+   THEN
 
    count-dos-logical-partitions TO dos-logical-partitions
 
@@ -377,28 +381,82 @@ AA268B49521E5A8B    CONSTANT GPT-PREP-PARTITION-4
        8 + x@    GPT-PREP-PARTITION-4 =
 ;
 
-: load-from-gpt-prep-partition ( addr -- size )
-   no-gpt? IF drop false EXIT THEN
-   debug-disk-label? IF
-      cr ." GPT partition found " cr
-   THEN
-   1 read-disk-buf disk-buf gpt>part-entry-lba l@-le
+\ Check for GPT MSFT BASIC DATA GUID - fat based
+EBD0A0A2            CONSTANT GPT-BASIC-DATA-PARTITION-1
+B9E5                CONSTANT GPT-BASIC-DATA-PARTITION-2
+4433                CONSTANT GPT-BASIC-DATA-PARTITION-3
+87C068B6B72699C7    CONSTANT GPT-BASIC-DATA-PARTITION-4
+
+: gpt-basic-data-partition? ( -- true|false )
+   disk-buf gpt-part-entry>part-type-guid
+   dup l@-le     GPT-BASIC-DATA-PARTITION-1 <> IF drop false EXIT THEN
+   dup 4 + w@-le GPT-BASIC-DATA-PARTITION-2 <> IF drop false EXIT THEN
+   dup 6 + w@-le GPT-BASIC-DATA-PARTITION-3 <> IF drop false EXIT THEN
+       8 + x@    GPT-BASIC-DATA-PARTITION-4 =
+;
+
+\
+\ GPT Signature
+\ ("EFI PART", 45h 46h 49h 20h 50h 41h 52h 54h)
+\
+4546492050415254 CONSTANT GPT-SIGNATURE
+
+\ The routine checks whether the protective MBR has GPT ID and then
+\ reads the gpt data from the sector. Also set the seek position and
+\ the partition size used in caller routines.
+
+: get-gpt-partition ( -- true|false )
+   no-gpt? IF false EXIT THEN
+   debug-disk-label? IF cr ." GPT partition found " cr  THEN
+   1 read-disk-buf
+   disk-buf gpt>part-entry-lba x@-le
    block-size * to seek-pos
    disk-buf gpt>part-entry-size l@-le to gpt-part-size
-   disk-buf gpt>num-part-entry l@-le dup 0= IF false EXIT THEN
+   gpt-part-size disk-buf-size > IF
+      cr ." GPT part size exceeds buffer allocated " cr
+      false exit
+   THEN
+   disk-buf gpt>signature x@ GPT-SIGNATURE =
+;
+
+: load-from-gpt-prep-partition ( addr -- size )
+   get-gpt-partition 0= IF false EXIT THEN
+   disk-buf gpt>num-part-entry l@-le dup 0= IF false exit THEN
    1+ 1 ?DO
       seek-pos 0 seek drop
       disk-buf gpt-part-size read drop gpt-prep-partition? IF
-         debug-disk-label? IF
-            ." GPT PReP partition found " cr
-         THEN
-         disk-buf gpt-part-entry>first-lba x@-le
-         disk-buf gpt-part-entry>last-lba x@-le
-         over - 1+                 ( addr offset len )
-         swap                      ( addr len offset )
-         block-size * to part-offset
-         0 0 seek drop             ( addr len )
-         block-size * read         ( size )
+         debug-disk-label? IF  ." GPT PReP partition found " cr THEN
+         disk-buf gpt-part-entry>first-lba x@-le ( addr first-lba )
+         disk-buf gpt-part-entry>last-lba x@-le  ( addr first-lba last-lba)
+         over - 1+                            ( addr first-lba blocks )
+         swap                                 ( addr blocks first-lba )
+         block-size * to part-offset          ( addr blocks )
+         0 0 seek drop                        ( addr blocks )
+         block-size * read                    ( size )
+         UNLOOP EXIT
+     THEN
+     seek-pos gpt-part-size i * + to seek-pos
+   LOOP
+   false
+;
+
+: try-gpt-dos-partition ( -- true|false )
+   get-gpt-partition 0= IF false EXIT THEN
+   disk-buf gpt>num-part-entry l@-le dup 0= IF false EXIT THEN
+   1+ 1 ?DO
+      seek-pos 0 seek drop
+      disk-buf gpt-part-size read drop
+      gpt-basic-data-partition? IF
+         debug-disk-label? IF ." GPT BASIC DATA partition found " cr THEN
+         disk-buf gpt-part-entry>first-lba x@-le       ( first-lba )
+         dup to part-start                          ( first-lba )
+         disk-buf gpt-part-entry>last-lba x@-le        ( first-lba last-lba )
+         over - 1+                                  ( first-lba s1 )
+         block-size * to part-size                  ( first-lba )
+         block-size * to part-offset                ( )
+         0 0 seek drop
+         disk-buf block-size read drop
+         disk-buf fat-bootblock?                    ( true|false )
          UNLOOP EXIT
       THEN
       seek-pos gpt-part-size i * + to seek-pos
@@ -491,7 +549,7 @@ AA268B49521E5A8B    CONSTANT GPT-PREP-PARTITION-4
 
    debug-disk-label? IF ." Trying CHRP boot " .s cr THEN
    1 disk-chrp-boot !
-   dup load-chrp-boot-file ?dup 0 <> IF .s cr nip EXIT THEN
+   dup load-chrp-boot-file ?dup 0 <> IF nip EXIT THEN
    0 disk-chrp-boot !
 
    debug-disk-label? IF ." Trying GPT boot " .s cr THEN
@@ -591,6 +649,7 @@ AA268B49521E5A8B    CONSTANT GPT-PREP-PARTITION-4
 
 : try-partitions ( -- found? )
    try-dos-partition IF try-files EXIT THEN
+   try-gpt-dos-partition IF try-files EXIT THEN
    \ try-iso9660-partition IF try-files EXIT THEN
    \ ... more partition types here...
    false
-- 
2.4.3

  parent reply	other threads:[~2015-06-30 11:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-30 11:01 [PATCH SLOF v3 0/5] GPT fixes/cleanup and LVM support with FAT Nikunj A Dadhania
2015-06-30 11:01 ` [PATCH SLOF v3 1/5] disk-label: simplify gpt-prep-partition? routine Nikunj A Dadhania
2015-06-30 11:01 ` [PATCH SLOF v3 2/5] introduce 8-byte LE helpers Nikunj A Dadhania
2015-06-30 11:01 ` [PATCH SLOF v3 3/5] disk-label: rename confusing "block" word Nikunj A Dadhania
2015-07-01  7:32   ` Segher Boessenkool
2015-07-02  5:47     ` Nikunj A Dadhania
2015-07-02 10:04       ` Segher Boessenkool
2015-07-02 10:14         ` Nikunj A Dadhania
2015-06-30 11:01 ` [PATCH SLOF v3 4/5] disk-label: introduce helper to check fat filesystem Nikunj A Dadhania
2015-06-30 11:01 ` Nikunj A Dadhania [this message]
2015-06-30 11:28   ` [PATCH SLOF v3 5/5] disk-label: add support for booting from GPT FAT partition Thomas Huth
2015-06-30 12:24     ` Nikunj A Dadhania
2015-06-30 18:57       ` Thomas Huth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435662081-4293-6-git-send-email-nikunj@linux.vnet.ibm.com \
    --to=nikunj@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=dvaleev@suse.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=segher@kernel.crashing.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).