From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
To: linux-leds@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
j.anaszewski@samsung.com
Cc: stewart@linux.vnet.ibm.com, arnd@arndb.de,
j.anaszewski81@gmail.com, cooloney@gmail.com, rpurdie@rpsys.net,
khandual@linux.vnet.ibm.com, mpe@ellerman.id.au,
benh@kernel.crashing.org,
Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Subject: [PATCH v7 1/3] powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
Date: Wed, 22 Jul 2015 20:22:45 +0530 [thread overview]
Message-ID: <1437576767-28496-2-git-send-email-hegdevasant@linux.vnet.ibm.com> (raw)
In-Reply-To: <1437576767-28496-1-git-send-email-hegdevasant@linux.vnet.ibm.com>
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
This patch registers the following two new OPAL interfaces calls
for the platform LED subsystem. With the help of these new OPAL calls,
the kernel will be able to get or set the state of various individual
LEDs on the system at any given location code which is passed through
the LED specific device tree nodes.
(1) OPAL_LEDS_GET_INDICATOR opal_leds_get_ind
(2) OPAL_LEDS_SET_INDICATOR opal_leds_set_ind
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/include/asm/opal-api.h | 25 ++++++++++++++++++++++++-
arch/powerpc/include/asm/opal.h | 4 ++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 ++
3 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index e9e4c52..8f8c45f 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -154,7 +154,9 @@
#define OPAL_FLASH_WRITE 111
#define OPAL_FLASH_ERASE 112
#define OPAL_PRD_MSG 113
-#define OPAL_LAST 113
+#define OPAL_LEDS_GET_INDICATOR 114
+#define OPAL_LEDS_SET_INDICATOR 115
+#define OPAL_LAST 115
/* Device tree flags */
@@ -756,6 +758,27 @@ struct opal_i2c_request {
__be64 buffer_ra; /* Buffer real address */
};
+/* LED Mode */
+#define POWERNV_LED_MODE_LIGHT_PATH "lightpath"
+#define POWERNV_LED_MODE_GUIDING_LIGHT "guidinglight"
+
+/* LED type */
+#define POWERNV_LED_TYPE_IDENTIFY "identify"
+#define POWERNV_LED_TYPE_FAULT "fault"
+#define POWERNV_LED_TYPE_ATTENTION "attention"
+
+enum OpalSlotLedType {
+ OPAL_SLOT_LED_TYPE_ID = 0, /* IDENTIFY LED */
+ OPAL_SLOT_LED_TYPE_FAULT = 1, /* FAULT LED */
+ OPAL_SLOT_LED_TYPE_ATTN = 2, /* System Attention LED */
+ OPAL_SLOT_LED_TYPE_MAX = 3
+};
+
+enum OpalSlotLedState {
+ OPAL_SLOT_LED_STATE_OFF = 0, /* LED is OFF */
+ OPAL_SLOT_LED_STATE_ON = 1 /* LED is ON */
+};
+
#endif /* __ASSEMBLY__ */
#endif /* __OPAL_API_H */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 958e941..3233e6d 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -195,6 +195,10 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
struct opal_i2c_request *oreq);
int64_t opal_prd_msg(struct opal_prd_msg *msg);
+int64_t opal_leds_get_ind(char *loc_code, __be64 *led_mask,
+ __be64 *led_value, __be64 *max_led_type);
+int64_t opal_leds_set_ind(uint64_t token, char *loc_code, const u64 led_mask,
+ const u64 led_value, __be64 *max_led_type);
int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf,
uint64_t size, uint64_t token);
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index d6a7b82..34c2734 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -297,3 +297,5 @@ OPAL_CALL(opal_flash_read, OPAL_FLASH_READ);
OPAL_CALL(opal_flash_write, OPAL_FLASH_WRITE);
OPAL_CALL(opal_flash_erase, OPAL_FLASH_ERASE);
OPAL_CALL(opal_prd_msg, OPAL_PRD_MSG);
+OPAL_CALL(opal_leds_get_ind, OPAL_LEDS_GET_INDICATOR);
+OPAL_CALL(opal_leds_set_ind, OPAL_LEDS_SET_INDICATOR);
--
2.1.0
next prev parent reply other threads:[~2015-07-22 14:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 14:52 [PATCH v7 0/3] LED driver for PowerNV platform Vasant Hegde
2015-07-22 14:52 ` Vasant Hegde [this message]
2015-07-22 14:52 ` [PATCH v7 2/3] powerpc/powernv: Create LED platform device Vasant Hegde
2015-07-22 14:52 ` [PATCH v7 3/3] leds/powernv: Add driver for PowerNV platform Vasant Hegde
2015-07-23 7:55 ` Jacek Anaszewski
2015-07-23 8:08 ` Vasant Hegde
2015-07-23 12:26 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437576767-28496-2-git-send-email-hegdevasant@linux.vnet.ibm.com \
--to=hegdevasant@linux.vnet.ibm.com \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=cooloney@gmail.com \
--cc=j.anaszewski81@gmail.com \
--cc=j.anaszewski@samsung.com \
--cc=khandual@linux.vnet.ibm.com \
--cc=linux-leds@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=rpurdie@rpsys.net \
--cc=stewart@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).