From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
benh@kernel.crashing.org, mpe@ellerman.id.au,
bhelgaas@google.com, grant.likely@linaro.org,
robherring2@gmail.com, panto@antoniou-consulting.com,
aik@ozlabs.ru, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v6 34/42] powerpc/pci: Delay creating pci_dn
Date: Thu, 6 Aug 2015 14:11:39 +1000 [thread overview]
Message-ID: <1438834307-26960-35-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1438834307-26960-1-git-send-email-gwshan@linux.vnet.ibm.com>
The pci_dn instances are allocated from memblock or bootmem when
creating PCI controller (hoses) in setup_arch(). The PCI hotplug,
which will be supported by proceeding patches, will release PCI
device nodes and their corresponding pci_dn on unplugging event.
The pci_dn instance memory chunks alloed from memblock or bootmem
are hard to reused after being released.
This delays creating pci_dn using core_initcall() so that they can
be allocated from slab. In turn, the memory chunks for them can be
reused after being released without problem. Since the pci_dn and
eeh_dev has same life cycle, the eeh_dev is created when pci_dn is
populated. We needn't create eeh_dev with another initcall. The
time to create PHB PEs is delayed a bit from core_initcall() to
core_initcall_sync().
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/eeh.h | 2 +-
arch/powerpc/include/asm/ppc-pci.h | 1 -
arch/powerpc/kernel/eeh_dev.c | 19 ++++------------
arch/powerpc/kernel/pci_dn.c | 20 +++++++++++++++--
arch/powerpc/platforms/maple/pci.c | 34 ++++++++++++++++++-----------
arch/powerpc/platforms/pasemi/pci.c | 3 ---
arch/powerpc/platforms/powermac/pci.c | 40 ++++++++++++++++++++--------------
arch/powerpc/platforms/powernv/pci.c | 3 ---
arch/powerpc/platforms/pseries/setup.c | 7 +-----
9 files changed, 69 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index ea1f13c4..19b6050 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -272,7 +272,7 @@ void eeh_pe_restore_bars(struct eeh_pe *pe);
const char *eeh_pe_loc_get(struct eeh_pe *pe);
struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
-void *eeh_dev_init(struct pci_dn *pdn, void *data);
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn, struct pci_controller *phb);
void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
int eeh_init(void);
int __init eeh_ops_register(struct eeh_ops *ops);
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index ca0c5bf..916775d 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -40,7 +40,6 @@ void *traverse_pci_dn(struct pci_dn *root,
void *(*fn)(struct pci_dn *, void *),
void *data);
-extern void pci_devs_phb_init(void);
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
/* From rtas_pci.h */
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index aabba94..7a135c1 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -44,14 +44,13 @@
/**
* eeh_dev_init - Create EEH device according to OF node
* @pdn: PCI device node
- * @data: PHB
+ * @phb: PCI controller
*
* It will create EEH device according to the given OF node. The function
* might be called by PCI emunation, DR, PHB hotplug.
*/
-void *eeh_dev_init(struct pci_dn *pdn, void *data)
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn, struct pci_controller *phb)
{
- struct pci_controller *phb = data;
struct eeh_dev *edev;
/* Allocate EEH device */
@@ -68,7 +67,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
edev->phb = phb;
INIT_LIST_HEAD(&edev->list);
- return NULL;
+ return edev;
}
/**
@@ -80,16 +79,8 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
*/
void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
{
- struct pci_dn *root = phb->pci_data;
-
/* EEH PE for PHB */
eeh_phb_pe_create(phb);
-
- /* EEH device for PHB */
- eeh_dev_init(root, phb);
-
- /* EEH devices for children OF nodes */
- traverse_pci_dn(root, eeh_dev_init, phb);
}
/**
@@ -105,9 +96,7 @@ static int __init eeh_dev_phb_init(void)
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
eeh_dev_phb_init_dynamic(phb);
- pr_info("EEH: devices created\n");
-
return 0;
}
-core_initcall(eeh_dev_phb_init);
+core_initcall_sync(eeh_dev_phb_init);
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index f0ddde7..53a11e9 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -290,8 +290,11 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
const __be32 *regs;
struct device_node *parent;
struct pci_dn *pdn;
+#ifdef CONFIG_EEH
+ struct eeh_dev *edev;
+#endif
- pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+ pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
if (pdn == NULL)
return NULL;
dn->data = pdn;
@@ -320,6 +323,15 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
/* Extended config space */
pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
+ /* Initialize EEH device */
+#ifdef CONFIG_EEH
+ edev = eeh_dev_init(pdn, phb);
+ if (!edev) {
+ kfree(pdn);
+ return NULL;
+ }
+#endif
+
/* Attach to parent node */
INIT_LIST_HEAD(&pdn->child_list);
INIT_LIST_HEAD(&pdn->list);
@@ -465,15 +477,19 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
* pci device found underneath. This routine runs once,
* early in the boot sequence.
*/
-void __init pci_devs_phb_init(void)
+static int __init pci_devs_phb_init(void)
{
struct pci_controller *phb, *tmp;
/* This must be done first so the device nodes have valid pci info! */
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
pci_devs_phb_init_dynamic(phb);
+
+ return 0;
}
+core_initcall(pci_devs_phb_init);
+
static void pci_dev_pdn_setup(struct pci_dev *pdev)
{
struct pci_dn *pdn;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a923230..a2f89e6 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -568,6 +568,26 @@ void maple_pci_irq_fixup(struct pci_dev *dev)
DBG(" <- maple_pci_irq_fixup\n");
}
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+
void __init maple_pci_init(void)
{
struct device_node *np, *root;
@@ -605,19 +625,7 @@ void __init maple_pci_init(void)
if (ht && maple_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
+ ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
/* Tell pci.c to not change any resource allocations. */
pci_add_flags(PCI_PROBE_ONLY);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index f3a68a0..10c4e8f 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -229,9 +229,6 @@ void __init pas_pci_init(void)
of_node_get(np);
of_node_put(root);
-
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
}
void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 59ab16f..20d7bde 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -878,6 +878,29 @@ void pmac_pci_irq_fixup(struct pci_dev *dev)
#endif /* CONFIG_PPC32 */
}
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_hot_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions for now. We should do something better in the
+ * future though
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+#endif /* CONFIG_PPC64 */
+
void __init pmac_pci_init(void)
{
struct device_node *np, *root;
@@ -914,22 +937,7 @@ void __init pmac_pci_init(void)
if (ht && pmac_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions for now. We should do something better in the
- * future though
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
- /* pmac_check_ht_link(); */
-
+ ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
#else /* CONFIG_PPC64 */
init_p2pbridge();
init_second_ohare();
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 5982110..b13186d 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -935,9 +935,6 @@ void __init pnv_pci_init(void)
for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
pnv_pci_init_ioda2_phb(np);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
/* Configure IOMMU DMA hooks */
set_pci_dma_ops(&dma_iommu_ops);
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index df6a704..92974aa 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -261,12 +261,8 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
switch (action) {
case OF_RECONFIG_ATTACH_NODE:
pci = np->parent->data;
- if (pci) {
+ if (pci)
update_dn_pci_info(np, pci->phb);
-
- /* Create EEH device for the OF node */
- eeh_dev_init(PCI_DN(np), pci->phb);
- }
break;
default:
err = NOTIFY_DONE;
@@ -482,7 +478,6 @@ static void __init find_and_init_phbs(void)
}
of_node_put(root);
- pci_devs_phb_init();
/*
* PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
--
2.1.0
next prev parent reply other threads:[~2015-08-06 4:13 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-06 4:11 [PATCH v6 00/42] powerpc/powernv: PCI hotplug suppport Gavin Shan
2015-08-06 4:11 ` [PATCH v6 01/42] PCI: Add pcibios_setup_bridge() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 02/42] powerpc/powernv: Drop pnv_ioda_setup_dev_PE() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 03/42] powerpc/powernv: Enable M64 on P7IOC Gavin Shan
2015-08-10 6:30 ` Alexey Kardashevskiy
2015-08-10 23:45 ` Gavin Shan
2015-08-11 2:06 ` Alexey Kardashevskiy
2015-08-12 10:28 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 04/42] powerpc/powernv: Reorder fields in struct pnv_phb Gavin Shan
2015-08-06 4:11 ` [PATCH v6 05/42] powerpc/powernv: Track IO/M32/M64 segments from PE Gavin Shan
2015-08-10 7:16 ` Alexey Kardashevskiy
2015-08-11 0:03 ` Gavin Shan
2015-08-11 2:23 ` Alexey Kardashevskiy
2015-08-12 10:45 ` Gavin Shan
2015-08-12 11:05 ` Alexey Kardashevskiy
2015-08-12 11:20 ` Gavin Shan
2015-08-12 12:57 ` Alexey Kardashevskiy
2015-08-12 23:34 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 06/42] powerpc/powernv: Simplify pnv_ioda_setup_pe_seg() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 07/42] powerpc/powernv: Improve IO and M32 mapping Gavin Shan
2015-08-10 7:40 ` Alexey Kardashevskiy
2015-08-11 0:12 ` Gavin Shan
2015-08-11 2:32 ` Alexey Kardashevskiy
2015-08-12 23:42 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 08/42] powerpc/powernv: Calculate PHB's DMA weight dynamically Gavin Shan
2015-08-10 7:48 ` Alexey Kardashevskiy
2015-08-10 9:21 ` Alexey Kardashevskiy
2015-08-12 23:57 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 09/42] powerpc/powernv: DMA32 cleanup Gavin Shan
2015-08-10 8:07 ` Alexey Kardashevskiy
2015-08-11 0:19 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 10/42] powerpc/powernv: pnv_ioda_setup_dma() configure one PE only Gavin Shan
2015-08-10 9:31 ` Alexey Kardashevskiy
2015-08-11 0:29 ` Gavin Shan
2015-08-11 2:39 ` Alexey Kardashevskiy
2015-08-12 23:59 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 11/42] powerpc/powernv: Trace DMA32 segments consumed by PE Gavin Shan
2015-08-10 9:43 ` Alexey Kardashevskiy
2015-08-11 0:33 ` Gavin Shan
2015-08-13 0:02 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 12/42] powerpc/powernv: Increase PE# capacity Gavin Shan
2015-08-10 9:53 ` Alexey Kardashevskiy
2015-08-11 0:38 ` Gavin Shan
2015-08-11 2:47 ` Alexey Kardashevskiy
2015-08-13 0:23 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 13/42] powerpc/pci: Cleanup on pci_controller_ops Gavin Shan
2015-08-06 4:11 ` [PATCH v6 14/42] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 15/42] powerpc/powernv: PE oriented during configuration Gavin Shan
2015-08-10 10:02 ` Alexey Kardashevskiy
2015-08-11 0:39 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 16/42] powerpc/powernv: Helper function pnv_ioda_init_pe() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 17/42] powerpc/powernv: Rename PE# fields in PHB Gavin Shan
2015-08-10 14:21 ` Alexey Kardashevskiy
2015-08-11 0:40 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 18/42] powerpc/powernv: Allocate PE# in deasending order Gavin Shan
2015-08-10 14:39 ` Alexey Kardashevskiy
2015-08-11 0:43 ` Gavin Shan
2015-08-11 2:50 ` Alexey Kardashevskiy
2015-08-13 0:28 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 19/42] powerpc/powernv: Reserve PE# for root bus Gavin Shan
2015-08-06 4:11 ` [PATCH v6 20/42] powerpc/powernv: Create PEs dynamically Gavin Shan
2015-08-14 13:52 ` Alexey Kardashevskiy
2015-08-15 4:59 ` Gavin Shan
2015-08-15 9:23 ` Alexey Kardashevskiy
2015-08-06 4:11 ` [PATCH v6 21/42] powerpc/powernv: Remove DMA32 list of PEs Gavin Shan
2015-08-06 4:11 ` [PATCH v6 22/42] powerpc/powernv: Move functions around Gavin Shan
2015-08-06 4:11 ` [PATCH v6 23/42] powerpc/powernv: Release PEs dynamically Gavin Shan
2015-08-11 13:03 ` Alexey Kardashevskiy
2015-08-13 0:54 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 24/42] powerpc/powernv: Supports slot ID Gavin Shan
2015-08-06 4:11 ` [PATCH v6 25/42] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2015-08-06 4:11 ` [PATCH v6 26/42] powerpc/powernv: Simplify pnv_eeh_reset() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 27/42] powerpc/powernv: Don't cover root bus in pnv_pci_reset_secondary_bus() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 28/42] powerpc/powernv: Fundamental reset " Gavin Shan
2015-08-06 4:11 ` [PATCH v6 29/42] powerpc/pci: Don't scan empty slot Gavin Shan
2015-08-06 4:11 ` [PATCH v6 30/42] powerpc/pci: Move pcibios_find_pci_bus() around Gavin Shan
2015-08-06 4:11 ` [PATCH v6 31/42] powerpc/pci: Rename pcibios_{add, remove}_pci_devices Gavin Shan
2015-08-06 4:11 ` [PATCH v6 32/42] powerpc/powernv: Introduce pnv_pci_poll() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 33/42] powerpc/powernv: Functions to get/reset PCI slot status Gavin Shan
2015-08-06 4:11 ` Gavin Shan [this message]
2015-08-06 4:11 ` [PATCH v6 35/42] powerpc/pci: Export traverse_pci_device_nodes() Gavin Shan
2015-08-06 4:11 ` [PATCH v6 36/42] powerpc/pci: Update bridge windows on PCI plugging Gavin Shan
2015-08-06 4:11 ` [PATCH v6 37/42] powerpc/powernv: Select OF_DYNAMIC Gavin Shan
2015-08-06 4:11 ` [PATCH v6 38/42] drivers/of: Unflatten subordinate nodes after specified level Gavin Shan
2015-08-06 14:09 ` Rob Herring
2015-11-03 23:16 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 39/42] drivers/of: Allow to specify root node in of_fdt_unflatten_tree() Gavin Shan
2015-08-10 22:42 ` Frank Rowand
2015-08-11 0:52 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 40/42] drivers/of: Return allocated memory chunk from of_fdt_unflatten_tree() Gavin Shan
2015-08-06 14:19 ` Rob Herring
2015-08-10 22:42 ` Frank Rowand
2015-08-11 0:52 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 41/42] drivers/of: Export OF changeset functions Gavin Shan
2015-08-06 13:48 ` Rob Herring
2015-08-07 1:43 ` Gavin Shan
2015-08-06 4:11 ` [PATCH v6 42/42] pci/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2015-08-15 3:13 ` Alexey Kardashevskiy
2015-08-15 4:47 ` Gavin Shan
2015-08-15 9:15 ` Alexey Kardashevskiy
2015-08-10 6:05 ` [PATCH v6 00/42] powerpc/powernv: PCI hotplug suppport Alexey Kardashevskiy
2015-08-10 7:17 ` Gavin Shan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438834307-26960-35-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=panto@antoniou-consulting.com \
--cc=robherring2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).