* Kernel access of bad area on kernel 4.1.6 @ 2015-08-27 15:31 Ilia Mirkin 2015-08-28 1:56 ` Michael Ellerman 0 siblings, 1 reply; 4+ messages in thread From: Ilia Mirkin @ 2015-08-27 15:31 UTC (permalink / raw) To: linuxppc-dev I've recently come into the possession of a PowerMac7,3 and have been cross-compiling a chroot for it on my (x86_64) desktop. However elfutils doesn't cross-compile for ppc64 due to its biarch m4 script which tries to execute a built program, so I kicked off a build locally and left for a few minutes. When I came back, I saw the below through netconsole, the fans were going full blast, and the machine was unresponsive. Is this a kernel issue? Hardware issue? What do I need to do in order for the instruction dump to not be XXX's and have a call trace? (Is this the annoying security stuff in action? I started with the g5_defconfig, perhaps that was a mistake.) Sorry for the newbie questions, but I'm very new to ppc. In case it matters, it's booted on an nfsroot, no swap. Thanks for any help, -ilia [ 8419.415061] Oops: Kernel access of bad area, sig: 11 [#1] [ 8419.416338] SMP NR_CPUS=4 PowerMac [ 8419.417623] Modules linked in: snd_aoa_codec_tas snd_aoa snd nouveau soundcore btusb btbcm btintel ttm bluetooth drm_kms_helper drm uninorth_agp agpgart [ 8419.419138] CPU: 0 PID: 12927 Comm: as Not tainted 4.1.6 #4 [ 8419.420539] task: c0000000573f3520 ti: c000000057698000 task.ti: c000000057698000 [ 8419.421963] NIP: c00000005769bca8 LR: c00000005769bca8 CTR: c00000000008a710 [ 8419.423400] REGS: c00000005769b7e0 TRAP: 0400 Not tainted (4.1.6) [ 8419.424850] MSR: 9000000010001032 <SF,HV,ME,IR,DR,RI> CR: 001048fc XER: 00000000 [ 8419.426407] SOFTE: 0 GPR00: 00000000ffffffff c00000005769ba60 c000000000b9ac00 c0000000590bb520 GPR04: c0000000573f3ab0 c0000000573f3588 c0000000001048fc c00000005769bca8 GPR08: c00000005769b890 c000000050000000 0000000000000001 c00000005ee0a290 GPR12: 0000000024044048 c00000000ffff000 c00000005769ba20 0000000000000600 GPR16: 0000000000000001 0000000000000000 c00000005bbd8e00 c000000058ccbcb0 GPR20: c00000005769ba50 0000000000000000 c000000000103d60 c00000005bbd8e00 GPR24: c00000005769ba40 0000000000000000 0000000000000001 0000000000000001 GPR28: 000000001007d630 0000000010049d08 c00000005769bc80 c000000058ccbcb0 [ 8419.440558] NIP [c00000005769bca8] 0xc00000005769bca8 [ 8419.442170] LR [c00000005769bca8] 0xc00000005769bca8 [ 8419.443774] Call Trace: [ 8419.445351] Instruction dump: [ 8419.446946] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX [ 8419.448659] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX [ 8419.456445] ---[ end trace ad7c77d8920840ff ]--- [ 8419.456511] [ 8419.456565] Fixing recursive fault but reboot is needed! ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Kernel access of bad area on kernel 4.1.6 2015-08-27 15:31 Kernel access of bad area on kernel 4.1.6 Ilia Mirkin @ 2015-08-28 1:56 ` Michael Ellerman 2015-08-28 5:30 ` Ilia Mirkin 0 siblings, 1 reply; 4+ messages in thread From: Michael Ellerman @ 2015-08-28 1:56 UTC (permalink / raw) To: Ilia Mirkin; +Cc: linuxppc-dev On Thu, 2015-08-27 at 11:31 -0400, Ilia Mirkin wrote: > I've recently come into the possession of a PowerMac7,3 and have been > cross-compiling a chroot for it on my (x86_64) desktop. However > elfutils doesn't cross-compile for ppc64 due to its biarch m4 script > which tries to execute a built program, so I kicked off a build > locally and left for a few minutes. OK, cross compiling how? A bunch of the guys here use buildroot, but maybe they aren't building elfutils? > When I came back, I saw the below > through netconsole, the fans were going full blast, and the machine > was unresponsive. Fans going full blast is normal when the kernel crashes, it's just a safety precaution so your machine doesn't melt. > Is this a kernel issue? Probably. > Hardware issue? Unlikely to be a hardware issue. > What do I need to do in order > for the instruction dump to not be XXX's and have a call trace? The XXX's mean that we couldn't read the memory where the instructions were in order to dump them, which is odd. I can't immediately see why that happened here. That's separate to getting a call trace, but possibly the same issue is causing both to not be emitted. > (Is this the annoying security stuff in action? I started with the Which stuff? Probably not though. > g5_defconfig, perhaps that was a mistake.) That should be a good config, and it booted originally right. > Sorry for the newbie questions, but I'm very new to ppc. No worries, welcome to ppc land! :) > In case it matters, it's booted on an nfsroot, no swap. OK. I don't test nfsroot so that could be the problem. What kernel version, 4.1.6 ? > Thanks for any help, > > -ilia > > [ 8419.415061] Oops: Kernel access of bad area, sig: 11 [#1] > [ 8419.416338] SMP NR_CPUS=4 PowerMac > [ 8419.417623] Modules linked in: snd_aoa_codec_tas snd_aoa snd > nouveau soundcore btusb btbcm btintel ttm bluetooth drm_kms_helper drm > uninorth_agp agpgart > [ 8419.419138] CPU: 0 PID: 12927 Comm: as Not tainted 4.1.6 #4 > [ 8419.420539] task: c0000000573f3520 ti: c000000057698000 task.ti: > c000000057698000 > [ 8419.421963] NIP: c00000005769bca8 LR: c00000005769bca8 CTR: c00000000008a710 > [ 8419.423400] REGS: c00000005769b7e0 TRAP: 0400 Not tainted (4.1.6) > [ 8419.424850] MSR: 9000000010001032 <SF,HV,ME,IR,DR,RI> CR: 001048fc > XER: 00000000 > [ 8419.426407] SOFTE: 0 > GPR00: 00000000ffffffff c00000005769ba60 c000000000b9ac00 c0000000590bb520 > GPR04: c0000000573f3ab0 c0000000573f3588 c0000000001048fc c00000005769bca8 > GPR08: c00000005769b890 c000000050000000 0000000000000001 c00000005ee0a290 > GPR12: 0000000024044048 c00000000ffff000 c00000005769ba20 0000000000000600 > GPR16: 0000000000000001 0000000000000000 c00000005bbd8e00 c000000058ccbcb0 > GPR20: c00000005769ba50 0000000000000000 c000000000103d60 c00000005bbd8e00 > GPR24: c00000005769ba40 0000000000000000 0000000000000001 0000000000000001 > GPR28: 000000001007d630 0000000010049d08 c00000005769bc80 c000000058ccbcb0 > [ 8419.440558] NIP [c00000005769bca8] 0xc00000005769bca8 > [ 8419.442170] LR [c00000005769bca8] 0xc00000005769bca8 > [ 8419.443774] Call Trace: > [ 8419.445351] Instruction dump: > [ 8419.446946] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX > XXXXXXXX XXXXXXXX > [ 8419.448659] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX > XXXXXXXX XXXXXXXX > [ 8419.456445] ---[ end trace ad7c77d8920840ff ]--- > [ 8419.456511] > [ 8419.456565] Fixing recursive fault but reboot is needed! Is this definitely the first oops? That looks like a pretty standard null pointer deref, or other bad pointer in the kernel. I can't tell exactly without the instruction dump though. cheers ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Kernel access of bad area on kernel 4.1.6 2015-08-28 1:56 ` Michael Ellerman @ 2015-08-28 5:30 ` Ilia Mirkin 2015-08-31 14:42 ` Ilia Mirkin 0 siblings, 1 reply; 4+ messages in thread From: Ilia Mirkin @ 2015-08-28 5:30 UTC (permalink / raw) To: Michael Ellerman; +Cc: linuxppc-dev On Thu, Aug 27, 2015 at 9:56 PM, Michael Ellerman <mpe@ellerman.id.au> wrote: > On Thu, 2015-08-27 at 11:31 -0400, Ilia Mirkin wrote: >> I've recently come into the possession of a PowerMac7,3 and have been >> cross-compiling a chroot for it on my (x86_64) desktop. However >> elfutils doesn't cross-compile for ppc64 due to its biarch m4 script >> which tries to execute a built program, so I kicked off a build >> locally and left for a few minutes. > > OK, cross compiling how? A bunch of the guys here use buildroot, but maybe they > aren't building elfutils? This is what I get in configure: checking whether powerpc64-unknown-linux-gnu-gcc -m32 makes executables we can run... configure: error: in `/usr/powerpc64-unknown-linux-gnu/tmp/portage/dev-libs/elfutils-0.158/work/elfutils-0.158-abi_ppc_64.ppc64': configure: error: cannot run test program while cross compiling and config.log has: $ /usr/powerpc64-unknown-linux-gnu/tmp/portage/dev-libs/elfutils-0.158/work/elfutils-0.158/configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=powerpc64-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --libdir=/usr/lib64 --disable-werror --enable-nls --disable-thread-safety --program-prefix=eu- --with-zlib --with-bzlib --without-lzma ... configure:6465: checking powerpc64-unknown-linux-gnu-gcc option for 32-bit word size configure:6478: powerpc64-unknown-linux-gnu-gcc -m32 -c -O2 -pipe -mcpu=G5 -mtune=G5 -fomit-frame-pointer conftest.c >&5 configure:6478: $? = 0 configure:6486: result: -m32 configure:6490: checking for 64-bit host configure:6511: result: yes configure:6538: checking whether powerpc64-unknown-linux-gnu-gcc -m32 makes executables we can run configure:6546: error: in `/usr/powerpc64-unknown-linux-gnu/tmp/portage/dev-libs/elfutils-0.158/work/elfutils-0.158-abi_ppc_64.ppc64': configure:6548: error: cannot run test program while cross compiling See `config.log' for more details I'm building with the help of gentoo's crossdev scripts, which in addition to setting up a crosscompiler, also sets up an easy way to "emerge" packages into some chroot. Looking at https://git.fedorahosted.org/cgit/elfutils.git/tree/m4/biarch.m4 makes it seem like it runs AC_RUN_IFELSE irrespective of cross-compilation. Unfortunately I'm not well-enough versed in m4 or how cross-compilation is normally handled to suggest a proper fix. I seem to recall it's normally done by just saying "if you're cross-compiling, you probably know what you're doing and so let's just assume things work as expected". > >> When I came back, I saw the below >> through netconsole, the fans were going full blast, and the machine >> was unresponsive. > > Fans going full blast is normal when the kernel crashes, it's just a safety > precaution so your machine doesn't melt. > >> Is this a kernel issue? > > Probably. > >> Hardware issue? > > Unlikely to be a hardware issue. > >> What do I need to do in order >> for the instruction dump to not be XXX's and have a call trace? > > The XXX's mean that we couldn't read the memory where the instructions were in > order to dump them, which is odd. I can't immediately see why that happened > here. > > That's separate to getting a call trace, but possibly the same issue is causing > both to not be emitted. Yeah, after sending the email I took a look at arch/powerpc/kernel/process.c which has show_instructions() { ... if (!__kernel_text_address(pc) || probe_kernel_address((unsigned int __user *)pc, instr)) { printk(KERN_CONT "XXXXXXXX "); and has various guards around printing a call trace. > >> (Is this the annoying security stuff in action? I started with the > > Which stuff? Probably not though. Oh I just remember a bunch of stuff getting added to the kernel to prevent information leaks via dmesg prints, in conjunction with kaslr. But you're right, this isn't it. > >> g5_defconfig, perhaps that was a mistake.) > > That should be a good config, and it booted originally right. > >> Sorry for the newbie questions, but I'm very new to ppc. > > No worries, welcome to ppc land! :) > > >> In case it matters, it's booted on an nfsroot, no swap. > > OK. I don't test nfsroot so that could be the problem. > > What kernel version, 4.1.6 ? Yes, 4.1.6 (as one could surmise from the backtrace). > >> Thanks for any help, >> >> -ilia >> >> [ 8419.415061] Oops: Kernel access of bad area, sig: 11 [#1] >> [ 8419.416338] SMP NR_CPUS=4 PowerMac >> [ 8419.417623] Modules linked in: snd_aoa_codec_tas snd_aoa snd >> nouveau soundcore btusb btbcm btintel ttm bluetooth drm_kms_helper drm >> uninorth_agp agpgart >> [ 8419.419138] CPU: 0 PID: 12927 Comm: as Not tainted 4.1.6 #4 >> [ 8419.420539] task: c0000000573f3520 ti: c000000057698000 task.ti: >> c000000057698000 >> [ 8419.421963] NIP: c00000005769bca8 LR: c00000005769bca8 CTR: c00000000008a710 >> [ 8419.423400] REGS: c00000005769b7e0 TRAP: 0400 Not tainted (4.1.6) >> [ 8419.424850] MSR: 9000000010001032 <SF,HV,ME,IR,DR,RI> CR: 001048fc >> XER: 00000000 >> [ 8419.426407] SOFTE: 0 >> GPR00: 00000000ffffffff c00000005769ba60 c000000000b9ac00 c0000000590bb520 >> GPR04: c0000000573f3ab0 c0000000573f3588 c0000000001048fc c00000005769bca8 >> GPR08: c00000005769b890 c000000050000000 0000000000000001 c00000005ee0a290 >> GPR12: 0000000024044048 c00000000ffff000 c00000005769ba20 0000000000000600 >> GPR16: 0000000000000001 0000000000000000 c00000005bbd8e00 c000000058ccbcb0 >> GPR20: c00000005769ba50 0000000000000000 c000000000103d60 c00000005bbd8e00 >> GPR24: c00000005769ba40 0000000000000000 0000000000000001 0000000000000001 >> GPR28: 000000001007d630 0000000010049d08 c00000005769bc80 c000000058ccbcb0 >> [ 8419.440558] NIP [c00000005769bca8] 0xc00000005769bca8 >> [ 8419.442170] LR [c00000005769bca8] 0xc00000005769bca8 >> [ 8419.443774] Call Trace: >> [ 8419.445351] Instruction dump: >> [ 8419.446946] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX >> XXXXXXXX XXXXXXXX >> [ 8419.448659] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX >> XXXXXXXX XXXXXXXX >> [ 8419.456445] ---[ end trace ad7c77d8920840ff ]--- >> [ 8419.456511] >> [ 8419.456565] Fixing recursive fault but reboot is needed! > > Is this definitely the first oops? > > That looks like a pretty standard null pointer deref, or other bad pointer in > the kernel. I can't tell exactly without the instruction dump though. Not *definitely* the first oops, but definitely the first one in netconsole. I unfortunately didn't have time to deal with the problem when it happened and just shut the system off without looking at the console. I'll give it all another shot. Thanks for the detailed reply! -ilia ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Kernel access of bad area on kernel 4.1.6 2015-08-28 5:30 ` Ilia Mirkin @ 2015-08-31 14:42 ` Ilia Mirkin 0 siblings, 0 replies; 4+ messages in thread From: Ilia Mirkin @ 2015-08-31 14:42 UTC (permalink / raw) To: Michael Ellerman; +Cc: linuxppc-dev On Fri, Aug 28, 2015 at 1:30 AM, Ilia Mirkin <imirkin@alum.mit.edu> wrote: > On Thu, Aug 27, 2015 at 9:56 PM, Michael Ellerman <mpe@ellerman.id.au> wrote: >> On Thu, 2015-08-27 at 11:31 -0400, Ilia Mirkin wrote: >>> I've recently come into the possession of a PowerMac7,3 and have been >>> cross-compiling a chroot for it on my (x86_64) desktop. However >>> elfutils doesn't cross-compile for ppc64 due to its biarch m4 script >>> which tries to execute a built program, so I kicked off a build >>> locally and left for a few minutes. >> >> OK, cross compiling how? A bunch of the guys here use buildroot, but maybe they >> aren't building elfutils? > > This is what I get in configure: > > checking whether powerpc64-unknown-linux-gnu-gcc -m32 makes > executables we can run... configure: error: in > `/usr/powerpc64-unknown-linux-gnu/tmp/portage/dev-libs/elfutils-0.158/work/elfutils-0.158-abi_ppc_64.ppc64': > configure: error: cannot run test program while cross compiling > > and config.log has: > > $ /usr/powerpc64-unknown-linux-gnu/tmp/portage/dev-libs/elfutils-0.158/work/elfutils-0.158/configure > --prefix=/usr --build=x86_64-pc-linux-gnu > --host=powerpc64-unknown-linux-gnu --mandir=/usr/share/man > --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc > --localstatedir=/var/lib --disable-dependency-tracking > --libdir=/usr/lib64 --disable-werror --enable-nls > --disable-thread-safety --program-prefix=eu- --with-zlib --with-bzlib > --without-lzma > ... > configure:6465: checking powerpc64-unknown-linux-gnu-gcc option for > 32-bit word size > configure:6478: powerpc64-unknown-linux-gnu-gcc -m32 -c -O2 -pipe > -mcpu=G5 -mtune=G5 -fomit-frame-pointer conftest.c >&5 > configure:6478: $? = 0 > configure:6486: result: -m32 > configure:6490: checking for 64-bit host > configure:6511: result: yes > configure:6538: checking whether powerpc64-unknown-linux-gnu-gcc -m32 > makes executables we can run > configure:6546: error: in > `/usr/powerpc64-unknown-linux-gnu/tmp/portage/dev-libs/elfutils-0.158/work/elfutils-0.158-abi_ppc_64.ppc64': > configure:6548: error: cannot run test program while cross compiling > See `config.log' for more details > > I'm building with the help of gentoo's crossdev scripts, which in > addition to setting up a crosscompiler, also sets up an easy way to > "emerge" packages into some chroot. > > Looking at https://git.fedorahosted.org/cgit/elfutils.git/tree/m4/biarch.m4 > makes it seem like it runs AC_RUN_IFELSE irrespective of > cross-compilation. Unfortunately I'm not well-enough versed in m4 or > how cross-compilation is normally handled to suggest a proper fix. I > seem to recall it's normally done by just saying "if you're > cross-compiling, you probably know what you're doing and so let's just > assume things work as expected". > >> >>> When I came back, I saw the below >>> through netconsole, the fans were going full blast, and the machine >>> was unresponsive. >> >> Fans going full blast is normal when the kernel crashes, it's just a safety >> precaution so your machine doesn't melt. >> >>> Is this a kernel issue? >> >> Probably. >> >>> Hardware issue? >> >> Unlikely to be a hardware issue. >> >>> What do I need to do in order >>> for the instruction dump to not be XXX's and have a call trace? >> >> The XXX's mean that we couldn't read the memory where the instructions were in >> order to dump them, which is odd. I can't immediately see why that happened >> here. >> >> That's separate to getting a call trace, but possibly the same issue is causing >> both to not be emitted. > > Yeah, after sending the email I took a look at > arch/powerpc/kernel/process.c which has > > show_instructions() { ... > if (!__kernel_text_address(pc) || > probe_kernel_address((unsigned int __user *)pc, instr)) { > printk(KERN_CONT "XXXXXXXX "); > > and has various guards around printing a call trace. > >> >>> (Is this the annoying security stuff in action? I started with the >> >> Which stuff? Probably not though. > > Oh I just remember a bunch of stuff getting added to the kernel to > prevent information leaks via dmesg prints, in conjunction with kaslr. > But you're right, this isn't it. > >> >>> g5_defconfig, perhaps that was a mistake.) >> >> That should be a good config, and it booted originally right. >> >>> Sorry for the newbie questions, but I'm very new to ppc. >> >> No worries, welcome to ppc land! :) >> >> >>> In case it matters, it's booted on an nfsroot, no swap. >> >> OK. I don't test nfsroot so that could be the problem. >> >> What kernel version, 4.1.6 ? > > Yes, 4.1.6 (as one could surmise from the backtrace). > >> >>> Thanks for any help, >>> >>> -ilia >>> >>> [ 8419.415061] Oops: Kernel access of bad area, sig: 11 [#1] >>> [ 8419.416338] SMP NR_CPUS=4 PowerMac >>> [ 8419.417623] Modules linked in: snd_aoa_codec_tas snd_aoa snd >>> nouveau soundcore btusb btbcm btintel ttm bluetooth drm_kms_helper drm >>> uninorth_agp agpgart >>> [ 8419.419138] CPU: 0 PID: 12927 Comm: as Not tainted 4.1.6 #4 >>> [ 8419.420539] task: c0000000573f3520 ti: c000000057698000 task.ti: >>> c000000057698000 >>> [ 8419.421963] NIP: c00000005769bca8 LR: c00000005769bca8 CTR: c00000000008a710 >>> [ 8419.423400] REGS: c00000005769b7e0 TRAP: 0400 Not tainted (4.1.6) >>> [ 8419.424850] MSR: 9000000010001032 <SF,HV,ME,IR,DR,RI> CR: 001048fc >>> XER: 00000000 >>> [ 8419.426407] SOFTE: 0 >>> GPR00: 00000000ffffffff c00000005769ba60 c000000000b9ac00 c0000000590bb520 >>> GPR04: c0000000573f3ab0 c0000000573f3588 c0000000001048fc c00000005769bca8 >>> GPR08: c00000005769b890 c000000050000000 0000000000000001 c00000005ee0a290 >>> GPR12: 0000000024044048 c00000000ffff000 c00000005769ba20 0000000000000600 >>> GPR16: 0000000000000001 0000000000000000 c00000005bbd8e00 c000000058ccbcb0 >>> GPR20: c00000005769ba50 0000000000000000 c000000000103d60 c00000005bbd8e00 >>> GPR24: c00000005769ba40 0000000000000000 0000000000000001 0000000000000001 >>> GPR28: 000000001007d630 0000000010049d08 c00000005769bc80 c000000058ccbcb0 >>> [ 8419.440558] NIP [c00000005769bca8] 0xc00000005769bca8 >>> [ 8419.442170] LR [c00000005769bca8] 0xc00000005769bca8 >>> [ 8419.443774] Call Trace: >>> [ 8419.445351] Instruction dump: >>> [ 8419.446946] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX >>> XXXXXXXX XXXXXXXX >>> [ 8419.448659] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX >>> XXXXXXXX XXXXXXXX >>> [ 8419.456445] ---[ end trace ad7c77d8920840ff ]--- >>> [ 8419.456511] >>> [ 8419.456565] Fixing recursive fault but reboot is needed! >> >> Is this definitely the first oops? >> >> That looks like a pretty standard null pointer deref, or other bad pointer in >> the kernel. I can't tell exactly without the instruction dump though. > > Not *definitely* the first oops, but definitely the first one in > netconsole. I unfortunately didn't have time to deal with the problem > when it happened and just shut the system off without looking at the > console. I'll give it all another shot. > > Thanks for the detailed reply! I've been having lots of general trouble on this machine... like no older kernels boot, but 4.1.6 and 4.2-rc8 are fine. I suspect that the toolchain might have some issues :( I've downgraded gcc to 4.8, but that didn't resolve it, binutils is next. However on 4.2-rc8 (well, ~airlied/drm-next), I managed to capture on netconsole the below (although it hangs fairly often, but usually without any messaging on OFfb or netconsole). By the way, you can tell if it's a first oops or not based on the taint... first oops will say 'Not tainted', while follow-up ones will have some taint. [ 247.551040] Oops: Kernel access of bad area, sig: 11 [#1] [ 247.551215] SMP NR_CPUS=4 PowerMac [ 247.551323] Modules linked in: cfg80211 snd_aoa_codec_tas snd_aoa snd soundcore uninorth_agp agpgart [ 247.551655] CPU: 0 PID: 2122 Comm: syslog-ng Not tainted 4.2.0-rc8-01316-g4b9e78b #6 [ 247.551873] task: c000000059b61a90 ti: c000000059bcc000 task.ti: c000000059bcc000 [ 247.552081] NIP: c0000000002d4e14 LR: c0000000002d4df8 CTR: c0000000002ef380 [ 247.552276] REGS: c000000059bcf530 TRAP: 0300 Not tainted (4.2.0-rc8-01316-g4b9e78b) [ 247.552496] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 42004422 XER: 20000000 [ 247.552808] DAR: 0000000000100108 DSISR: 42000000 SOFTE: 1 GPR00: c0000000002d4f5c c000000059bcf7b0 c000000000b9dc00 c0000000570058a0 GPR04: c0000000580880c8 0000000000000081 0000000000000001 0000000000100100 GPR08: c0000000580880d0 0000000000200200 0000000000100100 7f7f7f7f7f7f7f7f GPR12: 0000000022004428 c00000000ffff000 0000000044000000 0000000022000000 GPR16: 0000000010042418 00003fffe6383ae6 0000000000000000 ffffffffffffffff GPR20: 000000000000003a 00003fffe6382b58 0000000010020400 0000000000000000 GPR24: 000000001001db68 fffffffffffffff6 c000000059b4501d 0000000000000081 GPR28: c0000000570058b8 c000000057106d00 c0000000580881b8 c0000000570058a0 [ 247.554756] NIP [c0000000002d4e14] .nfs_do_access+0x3b4/0x410 [ 247.554918] LR [c0000000002d4df8] .nfs_do_access+0x398/0x410 [ 247.555075] Call Trace: [ 247.555147] [c000000059bcf7b0] [c0000000002d4e44] .nfs_do_access+0x3e4/0x410 (unreliable) [ 247.563012] [c000000059bcf8a0] [c0000000002d4f5c] .nfs_permission+0xac/0x230 [ 247.567129] [c000000059bcf930] [c000000000171f84] .__inode_permission+0x94/0x100 [ 247.575049] [c000000059bcf9c0] [c00000000017548c] .link_path_walk+0x8c/0x630 [ 247.579155] [c000000059bcfa90] [c000000000175ba8] .path_lookupat+0xb8/0x1b0 [ 247.583183] [c000000059bcfb20] [c00000000017802c] .filename_lookup+0x8c/0x180 [ 247.587134] [c000000059bcfc90] [c00000000016ad68] .vfs_fstatat+0x78/0x130 [ 247.590989] [c000000059bcfd40] [c00000000016b38c] .SyS_newstat+0x1c/0x50 [ 247.594733] [c000000059bcfe30] [c000000000007c98] system_call+0x38/0xd0 [ 247.598380] Instruction dump: [ 247.601901] 4bfff79d 4bfffd8c 7fe3fb78 389eff10 481656ad 60000000 e91f0020 e8ff0018 [ 247.609048] 3d400010 3d200020 61290200 614a0100 <f9070008> f8e80000 f95f0018 f93f0020 [ 247.616395] ---[ end trace c9fc24592b1a7aba ]--- [ 247.619918] [ 247.624094] Unable to handle kernel paging request for data at address 0x00000014 [ 247.631108] Faulting instruction address: 0xc0000000004f60d0 [ 247.634787] Oops: Kernel access of bad area, sig: 11 [#2] [ 247.638480] SMP NR_CPUS=4 PowerMac [ 247.642140] Modules linked in: cfg80211 snd_aoa_codec_tas snd_aoa snd soundcore uninorth_agp agpgart [ 247.649826] CPU: 0 PID: 1052 Comm: kwindfarm Tainted: G D 4.2.0-rc8-01316-g4b9e78b #6 [ 247.657608] task: c000000059524fb0 ti: c000000059afc000 task.ti: c000000059afc000 [ 247.665544] NIP: c0000000004f60d0 LR: c0000000004f60c4 CTR: c000000000041770 [ 247.669647] REGS: c000000059aff700 TRAP: 0300 Tainted: G D (4.2.0-rc8-01316-g4b9e78b) [ 247.677582] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 22022442 XER: 20000000 [ 247.685687] DAR: 0000000000000014 DSISR: 40000000 SOFTE: 1 GPR00: c0000000004f60c4 c000000059aff980 c000000000b9dc00 0000000000000001 GPR04: 00000000025da79d 0000000000000000 c000000059524fb0 0000000000000000 GPR08: 0000000080000000 0000000000000009 0000000000000000 0000000000009324 GPR12: 0000000022022448 c00000000ffff000 c0000000000780a0 c000000059ae0740 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: c000000000b66f40 0000000000000000 0000000000000004 c000000059affacc [ 247.721539] NIP [c0000000004f60d0] .wf_fcu_fan_get_rpm+0x50/0x150 [ 247.725125] LR [c0000000004f60c4] .wf_fcu_fan_get_rpm+0x44/0x150 [ 247.728656] Call Trace: [ 247.732114] [c000000059aff980] [c0000000004f60c4] .wf_fcu_fan_get_rpm+0x44/0x150 (unreliable) [ 247.739328] [c000000059affa30] [c0000000004f9204] .pm72_wf_notify+0x784/0x1260 [ 247.746623] [c000000059affb50] [c0000000000794ec] .notifier_call_chain+0x7c/0xf0 [ 247.754143] [c000000059affbf0] [c000000000079954] .__blocking_notifier_call_chain+0x64/0xa0 [ 247.761831] [c000000059affc90] [c0000000004f544c] .wf_thread_func+0x9c/0x170 [ 247.765805] [c000000059affd30] [c0000000000781a4] .kthread+0x104/0x130 [ 247.769715] [c000000059affe30] [c000000000007fa8] .ret_from_kernel_thread+0x58/0xb0 [ 247.777183] Instruction dump: [ 247.780808] 3880000b f8010010 f821ff51 ebc30048 38a10073 ebfe0020 7fe3fb78 837f0048 [ 247.788221] 4bfffc31 2f830001 409e00b8 89210073 <815e0010> 7d295630 793d07e1 408200d4 [ 247.795659] ---[ end trace c9fc24592b1a7abb ]--- [ 247.799338] ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-08-31 14:42 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-08-27 15:31 Kernel access of bad area on kernel 4.1.6 Ilia Mirkin 2015-08-28 1:56 ` Michael Ellerman 2015-08-28 5:30 ` Ilia Mirkin 2015-08-31 14:42 ` Ilia Mirkin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).