From: Zhiqiang Hou <B48286@freescale.com>
To: <linuxppc-dev@lists.ozlabs.org>, <scottwood@freescale.com>,
<galak@kernel.crashing.org>, <benh@kernel.crashing.org>,
<paulus@samba.org>, <mpe@ellerman.id.au>,
<devicetree@vger.kernel.org>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <harninder.rai@freescale.com>
Cc: <Minghuan.Lian@freescale.com>, <Mingkai.Hu@freescale.com>
Subject: [PATCH V2 1/2] powerpc/fsl: Add PCI node in device tree of bsc9132qds
Date: Fri, 16 Oct 2015 17:01:10 +0800 [thread overview]
Message-ID: <1444986071-27317-1-git-send-email-B48286@freescale.com> (raw)
From: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Change-Id: I4355add4a92d1fcf514843aea5ecadd2e2517969
Reviewed-on: http://git.am.freescale.net:8181/2454
Reviewed-by: Zang Tiefei-R61911 <tie-fei.zang@freescale.com>
Reviewed-by: Kushwaha Prabhakar-B32579 <prabhakar@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
---
V2:
- Remove property clock-frequency.
arch/powerpc/boot/dts/bsc9132qds.dts | 15 ++++++++++++++
arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi | 28 +++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi | 1 +
3 files changed, 44 insertions(+)
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts
index 6cab106..940d719 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dts
+++ b/arch/powerpc/boot/dts/bsc9132qds.dts
@@ -29,6 +29,21 @@
soc: soc@ff700000 {
ranges = <0x0 0x0 0xff700000 0x100000>;
};
+
+ pci0: pcie@ff70a000 {
+ reg = <0 0xff70a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x90000000
+ 0x2000000 0x0 0x90000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
};
/include/ "bsc9132qds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
index c723071..b5f0715 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
@@ -40,6 +40,34 @@
interrupts = <16 2 0 0 20 2 0 0>;
};
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0
+ >;
+ };
+};
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
index 301a9db..90f7949 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
@@ -45,6 +45,7 @@
serial0 = &serial0;
ethernet0 = &enet0;
ethernet1 = &enet1;
+ pci0 = &pci0;
};
cpus {
--
2.1.0.27.g96db324
next reply other threads:[~2015-10-16 9:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-16 9:01 Zhiqiang Hou [this message]
2015-10-16 9:01 ` [PATCH V2 2/2] powerpc/85xx: Add PCIe controller support for bsc9132qds Zhiqiang Hou
2015-10-17 1:33 ` [V2,1/2] powerpc/fsl: Add PCI node in device tree of bsc9132qds Scott Wood
2015-10-19 2:12 ` Hou Zhiqiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444986071-27317-1-git-send-email-B48286@freescale.com \
--to=b48286@freescale.com \
--cc=Minghuan.Lian@freescale.com \
--cc=Mingkai.Hu@freescale.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@kernel.crashing.org \
--cc=harninder.rai@freescale.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).