From: Michael Neuling <mikey@neuling.org>
To: Michael Ellerman <mpe@ellerman.id.au>,
Anshuman Khandual <khandual@linux.vnet.ibm.com>,
benh@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org, paulus@samba.org, sam.bobroff@au1.ibm.com
Subject: Re: [PATCH 4/5] powerpc/tm: Check for already reclaimed tasks
Date: Mon, 16 Nov 2015 21:21:31 +1100 [thread overview]
Message-ID: <1447669291.17316.10.camel@neuling.org> (raw)
In-Reply-To: <1447666430.2191.5.camel@ellerman.id.au>
On Mon, 2015-11-16 at 20:33 +1100, Michael Ellerman wrote:
> On Mon, 2015-11-16 at 20:23 +1100, Michael Neuling wrote:
> > On Mon, 2015-11-16 at 12:51 +0530, Anshuman Khandual wrote:
> > > On 11/13/2015 10:27 AM, Michael Neuling wrote:
> > > > Currently we can hit a scenario where we'll tm_reclaim() twice.
> > > > This
> > > > results in a TM bad thing exception because the second reclaim
> > > > occurs
> > > > when not in suspend mode.
> > > >=20
> > > > The scenario in which this can happen is the following. We
> > > > attempt
> > > > to
> > > > deliver a signal to userspace. To do this we need obtain the
> > > > stack
> > > > pointer to write the signal context. To get this stack pointer
> > > > we
> > > > must tm_reclaim() in case we need to use the checkpointed stack
> > > > pointer (see get_tm_stackpointer()). Normally we'd then return
> > > > directly to userspace to deliver the signal without going
> > > > through
> > > > __switch_to().
> > > >=20
> > > > Unfortunatley, if at this point we get an error (such as a bad
> > > > userspace stack pointer), we need to exit the process. The
> > > > exit
> > > > will
> > > > result in a __switch_to(). __switch_to() will attempt to save
> > > > the
> > > > process state which results in another tm_reclaim(). This
> > > > tm_reclaim() now causes a TM Bad Thing exception as this state
> > > > has
> > > > already been saved and the processor is no longer in TM suspend
> > > > mode.
> > > > Whee!
> > > >=20
> > > > This patch checks the state of the MSR to ensure we are TM
> > > > suspended
> > > > before we attempt the tm_reclaim(). If we've already saved the
> > > > state
> > > > away, we should no longer be in TM suspend mode. This has the
> > > > additional advantage of checking for a potential TM Bad Thing
> > > > exception.
> > >=20
> > > Can this situation be created using a test and verified that with
> > > this new change, the kernel can handle it successfully. I guess
> > > the self test in the series does not cover this scenario.
> >=20
> > No it doesn't. The syscall fuzzer I have does hit it but I don't
> > have
> > permission to post that.
>=20
> And we don't really want a fuzzer as a selftest, because it might
> call unlink
> or something else bad.
>=20
> But having found the bug with the fuzzer, can't you write a test that
> triggers
> the bad case?
>=20
> > From your description it sounds like if you had a child spinning
> > with a bad r1,
> and then a parent sent it a signal that would trip it?
You'd need to turn on TM too, but yeah... I have something like this
working which I'll cleanup and post as a self test:
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <stdlib.h>
#include <stdio.h>
#include <signal.h>
void signal_segv(int signum)
{
/* This should never actually run since stack is foobar */
exit(1);
}
int main()
{
int pid;
pid =3D fork();
if (pid < 0)
exit(1);
if (pid) {
// Parent
wait(NULL);
printf("PASSED\n");
return 0;
}
if (signal(SIGSEGV, signal_segv) =3D=3D SIG_ERR)
exit(1);
asm volatile("li 1, 0 ;"
"1:"
".long 0x7C00051D ;" // tbegin
"beq 1b ;" // retry for ever
".long 0x7C0005DD ; ;" // tsuspend
"ld 2, 0(1) ;" // trigger segv"
: : : "memory");
return 1;
}
next prev parent reply other threads:[~2015-11-16 10:21 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-13 4:57 [PATCH 1/5] powerpc: Print MSR TM bits in oops message Michael Neuling
2015-11-13 4:57 ` [PATCH 2/5] selftests/powerpc: Add TM signal return selftest Michael Neuling
2015-11-16 10:24 ` Michael Ellerman
2015-11-17 10:12 ` Michael Neuling
2015-11-13 4:57 ` [PATCH 3/5] powerpc/tm: Block signal return setting invalid MSR state Michael Neuling
2015-11-16 10:05 ` Michael Ellerman
2015-11-17 10:30 ` Michael Neuling
2015-11-13 4:57 ` [PATCH 4/5] powerpc/tm: Check for already reclaimed tasks Michael Neuling
2015-11-16 7:21 ` Anshuman Khandual
2015-11-16 9:23 ` Michael Neuling
2015-11-16 9:33 ` Michael Ellerman
2015-11-16 10:21 ` Michael Neuling [this message]
2015-11-13 4:57 ` [PATCH 5/5] powerpc/tm: Clarify get_tm_stackpointer() by renaming it Michael Neuling
2015-11-16 9:51 ` Michael Ellerman
2015-11-16 7:22 ` [PATCH 1/5] powerpc: Print MSR TM bits in oops message Anshuman Khandual
2015-11-16 9:27 ` Michael Ellerman
2015-11-16 22:07 ` Anton Blanchard
2015-11-17 10:01 ` Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447669291.17316.10.camel@neuling.org \
--to=mikey@neuling.org \
--cc=benh@kernel.crashing.org \
--cc=khandual@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=sam.bobroff@au1.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).