linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Rashmica Gupta <rashmicy@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: mikey@neuling.org
Subject: [v4] selftests/powerpc: Add test to check if TAR is corrupted
Date: Thu,  3 Dec 2015 11:48:35 +1100	[thread overview]
Message-ID: <1449103715-28514-1-git-send-email-rashmicy@gmail.com> (raw)

If the transaction is aborted, the TAR should be rolled back to the
checkpointed value before the transaction began. The value written to the
TAR when the transaction is suspended should only remain there if the
transaction completes successfully.

Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
---

This must be run before tm-signal-stack as after this test is run a reboot
is required -- changed the order of the tests in the Makefile.

 tools/testing/selftests/powerpc/tm/.gitignore |  1 +
 tools/testing/selftests/powerpc/tm/Makefile   |  2 +-
 tools/testing/selftests/powerpc/tm/tm-tar.c   | 92 +++++++++++++++++++++++++++
 3 files changed, 94 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/powerpc/tm/tm-tar.c

diff --git a/tools/testing/selftests/powerpc/tm/.gitignore b/tools/testing/selftests/powerpc/tm/.gitignore
index 76eae258feeb..9bf6749550e3 100644
--- a/tools/testing/selftests/powerpc/tm/.gitignore
+++ b/tools/testing/selftests/powerpc/tm/.gitignore
@@ -4,3 +4,4 @@ tm-signal-msr-resv
 tm-signal-stack
 tm-fork
 tm-dscr
+tm-tar
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index dc368f789afa..cd3d42a15601 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -1,4 +1,4 @@
-TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-fork tm-dscr tm-signal-stack
+TEST_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-fork tm-dscr tm-tar tm-signal-stack
 
 all: $(TEST_PROGS)
 
diff --git a/tools/testing/selftests/powerpc/tm/tm-tar.c b/tools/testing/selftests/powerpc/tm/tm-tar.c
new file mode 100644
index 000000000000..41873b5cb3b8
--- /dev/null
+++ b/tools/testing/selftests/powerpc/tm/tm-tar.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2015, Michael Neuling, IBM Corp.
+ * Licensed under GPLv2.
+ * Original: Michael Neuling 19/7/2013
+ * Edited: Rashmica Gupta 01/12/2015
+ *
+ * Do some transactions, see if the tar is corrupted.
+ * If the transaction is aborted, the TAR should be rolled back to the
+ * checkpointed value before the transaction began. The value written to
+ * TAR in suspended mode should only remain in TAR if the transaction
+ * completes.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "tm.h"
+#include "utils.h"
+
+#define SPRN_TAR	0x32f
+
+int	num_loops	= 10000;
+
+int test_tar(void)
+{
+	int i;
+
+	SKIP_IF(!have_htm());
+
+	for (i = 0; i < num_loops; i++)
+	{
+		uint64_t result = 0;
+		asm __volatile__(
+			"li	7, 1;"
+			"mtspr	%[tar], 7;"	/* tar = 1 */
+			"tbegin.;"
+			"beq	3f;"
+			"li	4, 0x7000;"	/* Loop lots, to use time */
+			"2:;"			/* Start loop */
+			"li	7, 2;"
+			"mtspr	%[tar], 7;"	/* tar = 2 */
+			"tsuspend.;"
+			"li	7, 3;"
+			"mtspr	%[tar], 7;"	/* tar = 3 */
+			"tresume.;"
+			"subi	4, 4, 1;"
+			"cmpdi	4, 0;"
+			"bne	2b;"
+			"tend.;"
+
+			/* Transaction sucess! TAR should be 3 */
+			"mfspr  7, %[tar];"
+			"ori	%[res], 7, 4;"  // res = 3|4 = 7
+			"b	4f;"
+
+			/* Abort handler. TAR should be rolled back to 1 */
+			"3:;"
+			"mfspr  7, %[tar];"
+			"ori	%[res], 7, 8;"	// res = 1|8 = 9
+			"4:;"
+
+			: [res]"=r"(result)
+			: [tar]"i"(SPRN_TAR)
+			   : "memory", "r0", "r4", "r7");
+
+		/* If result is anything else other than 7 or 9, the tar
+		 * value must have been corrupted. */
+		if ((result != 7) && (result != 9))
+			return 1;
+	}
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	/* A low number of iterations (eg 100) can cause a false pass */
+	if (argc > 1) {
+		if (strcmp(argv[1], "-h") == 0) {
+			printf("Syntax:\n\t%s [<num loops>]\n",
+			       argv[0]);
+			return 1;
+		} else {
+			num_loops = atoi(argv[1]);
+		}
+	}
+
+	printf("Starting, %d loops\n", num_loops);
+
+	return test_harness(test_tar, "tm_tar");
+}
-- 
2.5.0

                 reply	other threads:[~2015-12-03  0:48 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449103715-28514-1-git-send-email-rashmicy@gmail.com \
    --to=rashmicy@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mikey@neuling.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).