From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v2 4/4] powerpc/powernv: Simplify definitions of EEH debugfs handlers
Date: Tue, 9 Feb 2016 15:50:24 +1100 [thread overview]
Message-ID: <1454993431-17068-4-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1454993431-17068-1-git-send-email-gwshan@linux.vnet.ibm.com>
The EEH debugfs handlers have same prototype. This introduces
a macro to define them, then to simplify the code. No logical
changes.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/eeh-powernv.c | 60 ++++++++++------------------
1 file changed, 22 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 87f47e5..8119172 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -167,42 +167,26 @@ static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val)
return 0;
}
-static int pnv_eeh_outb_dbgfs_set(void *data, u64 val)
-{
- return pnv_eeh_dbgfs_set(data, 0xD10, val);
-}
-
-static int pnv_eeh_outb_dbgfs_get(void *data, u64 *val)
-{
- return pnv_eeh_dbgfs_get(data, 0xD10, val);
-}
-
-static int pnv_eeh_inbA_dbgfs_set(void *data, u64 val)
-{
- return pnv_eeh_dbgfs_set(data, 0xD90, val);
-}
-
-static int pnv_eeh_inbA_dbgfs_get(void *data, u64 *val)
-{
- return pnv_eeh_dbgfs_get(data, 0xD90, val);
-}
-
-static int pnv_eeh_inbB_dbgfs_set(void *data, u64 val)
-{
- return pnv_eeh_dbgfs_set(data, 0xE10, val);
-}
-
-static int pnv_eeh_inbB_dbgfs_get(void *data, u64 *val)
-{
- return pnv_eeh_dbgfs_get(data, 0xE10, val);
-}
+#define PNV_EEH_DBGFS_ENTRY(name, reg) \
+static int pnv_eeh_dbgfs_set_##name(void *data, u64 val) \
+{ \
+ return pnv_eeh_dbgfs_set(data, reg, val); \
+} \
+ \
+static int pnv_eeh_dbgfs_get_##name(void *data, u64 *val) \
+{ \
+ return pnv_eeh_dbgfs_get(data, reg, val); \
+} \
+ \
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_dbgfs_ops_##name, \
+ pnv_eeh_dbgfs_get_##name, \
+ pnv_eeh_dbgfs_set_##name, \
+ "0x%llx\n")
+
+PNV_EEH_DBGFS_ENTRY(outb, 0xD10);
+PNV_EEH_DBGFS_ENTRY(inbA, 0xD90);
+PNV_EEH_DBGFS_ENTRY(inbB, 0xE10);
-DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_outb_dbgfs_ops, pnv_eeh_outb_dbgfs_get,
- pnv_eeh_outb_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbA_dbgfs_ops, pnv_eeh_inbA_dbgfs_get,
- pnv_eeh_inbA_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbB_dbgfs_ops, pnv_eeh_inbB_dbgfs_get,
- pnv_eeh_inbB_dbgfs_set, "0x%llx\n");
#endif /* CONFIG_DEBUG_FS */
/**
@@ -268,13 +252,13 @@ static int pnv_eeh_post_init(void)
debugfs_create_file("err_injct_outbound", 0600,
phb->dbgfs, hose,
- &pnv_eeh_outb_dbgfs_ops);
+ &pnv_eeh_dbgfs_ops_outb);
debugfs_create_file("err_injct_inboundA", 0600,
phb->dbgfs, hose,
- &pnv_eeh_inbA_dbgfs_ops);
+ &pnv_eeh_dbgfs_ops_inbA);
debugfs_create_file("err_injct_inboundB", 0600,
phb->dbgfs, hose,
- &pnv_eeh_inbB_dbgfs_ops);
+ &pnv_eeh_dbgfs_ops_inbB);
#endif /* CONFIG_DEBUG_FS */
}
--
2.1.0
next prev parent reply other threads:[~2016-02-09 4:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 4:50 [PATCH v2 1/4] powerpc/eeh: Fix stale cached primary bus Gavin Shan
2016-02-09 4:50 ` [PATCH v2 2/4] powerpc/powernv: Fix stale PE " Gavin Shan
2016-02-12 6:02 ` Andrew Donnellan
2016-02-12 6:09 ` Gavin Shan
2016-02-15 10:38 ` Michael Ellerman
2016-02-15 22:43 ` Gavin Shan
2016-02-09 4:50 ` [PATCH v2 3/4] powerpc/eeh: Reworked eeh_pe_bus_get() Gavin Shan
2016-03-09 12:51 ` [v2,3/4] " Michael Ellerman
2016-02-09 4:50 ` Gavin Shan [this message]
2016-02-17 12:41 ` [v2, 4/4] powerpc/powernv: Simplify definitions of EEH debugfs handlers Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454993431-17068-4-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).