From: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
To: imunsie@au1.ibm.com, michael.neuling@au1.ibm.com,
manoj@linux.vnet.ibm.com, mrochs@linux.vnet.ibm.com,
linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v6 13/20] cxl: sysfs support for guests
Date: Fri, 4 Mar 2016 12:26:37 +0100 [thread overview]
Message-ID: <1457090804-9719-14-git-send-email-fbarrat@linux.vnet.ibm.com> (raw)
In-Reply-To: <1457090804-9719-1-git-send-email-fbarrat@linux.vnet.ibm.com>
From: Christophe Lombard <clombard@linux.vnet.ibm.com>
Filter out a few adapter parameters which don't make sense in a guest.
Document the changes.
Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
---
Documentation/ABI/testing/sysfs-class-cxl | 10 ++--
drivers/misc/cxl/cxl.h | 7 +++
drivers/misc/cxl/guest.c | 25 +++++++++
drivers/misc/cxl/native.c | 7 +++
drivers/misc/cxl/sysfs.c | 89 ++++++++++++++++++++++++-------
5 files changed, 113 insertions(+), 25 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index b07e86d..7fd737e 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -159,7 +159,7 @@ Description: read only
Decimal value of the Per Process MMIO space length.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<afu>m/pp_mmio_off
+What: /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest)
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -183,7 +183,7 @@ Description: read only
Identifies the revision level of the PSL.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/base_image
+What: /sys/class/cxl/<card>/base_image (not in a guest)
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -193,7 +193,7 @@ Description: read only
during the initial program load.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/image_loaded
+What: /sys/class/cxl/<card>/image_loaded (not in a guest)
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
@@ -201,7 +201,7 @@ Description: read only
onto the card.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/load_image_on_perst
+What: /sys/class/cxl/<card>/load_image_on_perst (not in a guest)
Date: December 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read/write
@@ -224,7 +224,7 @@ Description: write only
to reload the FPGA depending on load_image_on_perst.
Users: https://github.com/ibm-capi/libcxl
-What: /sys/class/cxl/<card>/perst_reloads_same_image
+What: /sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
Date: July 2015
Contact: linuxppc-dev@lists.ozlabs.org
Description: read/write
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 4372a87..a7e75f1 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -336,6 +336,12 @@ enum prefault_modes {
CXL_PREFAULT_ALL,
};
+enum cxl_attrs {
+ CXL_ADAPTER_ATTRS,
+ CXL_AFU_MASTER_ATTRS,
+ CXL_AFU_ATTRS,
+};
+
struct cxl_sste {
__be64 esid_data;
__be64 vsid_data;
@@ -844,6 +850,7 @@ struct cxl_backend_ops {
int (*attach_process)(struct cxl_context *ctx, bool kernel,
u64 wed, u64 amr);
int (*detach_process)(struct cxl_context *ctx);
+ bool (*support_attributes)(const char *attr_name, enum cxl_attrs type);
bool (*link_ok)(struct cxl *cxl);
void (*release_afu)(struct device *dev);
ssize_t (*afu_read_err_buffer)(struct cxl_afu *afu, char *buf,
diff --git a/drivers/misc/cxl/guest.c b/drivers/misc/cxl/guest.c
index 03eb83d..920e074 100644
--- a/drivers/misc/cxl/guest.c
+++ b/drivers/misc/cxl/guest.c
@@ -596,6 +596,30 @@ static int guest_afu_check_and_enable(struct cxl_afu *afu)
return 0;
}
+static bool guest_support_attributes(const char *attr_name,
+ enum cxl_attrs type)
+{
+ switch (type) {
+ case CXL_ADAPTER_ATTRS:
+ if ((strcmp(attr_name, "base_image") == 0) ||
+ (strcmp(attr_name, "load_image_on_perst") == 0) ||
+ (strcmp(attr_name, "perst_reloads_same_image") == 0) ||
+ (strcmp(attr_name, "image_loaded") == 0))
+ return false;
+ break;
+ case CXL_AFU_MASTER_ATTRS:
+ if ((strcmp(attr_name, "pp_mmio_off") == 0))
+ return false;
+ break;
+ case CXL_AFU_ATTRS:
+ break;
+ default:
+ break;
+ }
+
+ return true;
+}
+
static int activate_afu_directed(struct cxl_afu *afu)
{
int rc;
@@ -936,6 +960,7 @@ const struct cxl_backend_ops cxl_guest_ops = {
.ack_irq = guest_ack_irq,
.attach_process = guest_attach_process,
.detach_process = guest_detach_process,
+ .support_attributes = guest_support_attributes,
.link_ok = guest_link_ok,
.release_afu = guest_release_afu,
.afu_read_err_buffer = guest_afu_read_err_buffer,
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index c0bca59..0e289c2 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -967,6 +967,12 @@ int cxl_check_error(struct cxl_afu *afu)
return (cxl_p1n_read(afu, CXL_PSL_SCNTL_An) == ~0ULL);
}
+static bool native_support_attributes(const char *attr_name,
+ enum cxl_attrs type)
+{
+ return true;
+}
+
static int native_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off, u64 *out)
{
if (unlikely(!cxl_ops->link_ok(afu->adapter)))
@@ -1026,6 +1032,7 @@ const struct cxl_backend_ops cxl_native_ops = {
.ack_irq = native_ack_irq,
.attach_process = native_attach_process,
.detach_process = native_detach_process,
+ .support_attributes = native_support_attributes,
.link_ok = cxl_adapter_link_ok,
.release_afu = cxl_pci_release_afu,
.afu_read_err_buffer = cxl_pci_afu_read_err_buffer,
diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c
index 1a1409c..907c99b 100644
--- a/drivers/misc/cxl/sysfs.c
+++ b/drivers/misc/cxl/sysfs.c
@@ -253,8 +253,14 @@ static ssize_t irqs_max_store(struct device *device,
if (irqs_max < afu->pp_irqs)
return -EINVAL;
- if (irqs_max > afu->adapter->user_irqs)
- return -EINVAL;
+ if (cpu_has_feature(CPU_FTR_HVMODE)) {
+ if (irqs_max > afu->adapter->user_irqs)
+ return -EINVAL;
+ } else {
+ /* pHyp sets a per-AFU limit */
+ if (irqs_max > afu->guest->max_ints)
+ return -EINVAL;
+ }
afu->irqs_max = irqs_max;
return count;
@@ -406,24 +412,39 @@ static struct device_attribute afu_attrs[] = {
int cxl_sysfs_adapter_add(struct cxl *adapter)
{
+ struct device_attribute *dev_attr;
int i, rc;
for (i = 0; i < ARRAY_SIZE(adapter_attrs); i++) {
- if ((rc = device_create_file(&adapter->dev, &adapter_attrs[i])))
- goto err;
+ dev_attr = &adapter_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_ADAPTER_ATTRS)) {
+ if ((rc = device_create_file(&adapter->dev, dev_attr)))
+ goto err;
+ }
}
return 0;
err:
- for (i--; i >= 0; i--)
- device_remove_file(&adapter->dev, &adapter_attrs[i]);
+ for (i--; i >= 0; i--) {
+ dev_attr = &adapter_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_ADAPTER_ATTRS))
+ device_remove_file(&adapter->dev, dev_attr);
+ }
return rc;
}
+
void cxl_sysfs_adapter_remove(struct cxl *adapter)
{
+ struct device_attribute *dev_attr;
int i;
- for (i = 0; i < ARRAY_SIZE(adapter_attrs); i++)
- device_remove_file(&adapter->dev, &adapter_attrs[i]);
+ for (i = 0; i < ARRAY_SIZE(adapter_attrs); i++) {
+ dev_attr = &adapter_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_ADAPTER_ATTRS))
+ device_remove_file(&adapter->dev, dev_attr);
+ }
}
struct afu_config_record {
@@ -534,7 +555,7 @@ static struct afu_config_record *cxl_sysfs_afu_new_cr(struct cxl_afu *afu, int c
/*
* Export raw AFU PCIe like config record. For now this is read only by
* root - we can expand that later to be readable by non-root and maybe
- * even writable provided we have a good use-case. Once we suport
+ * even writable provided we have a good use-case. Once we support
* exposing AFUs through a virtual PHB they will get that for free from
* Linux' PCI infrastructure, but until then it's not clear that we
* need it for anything since the main use case is just identifying
@@ -572,6 +593,7 @@ err:
void cxl_sysfs_afu_remove(struct cxl_afu *afu)
{
+ struct device_attribute *dev_attr;
struct afu_config_record *cr, *tmp;
int i;
@@ -579,8 +601,12 @@ void cxl_sysfs_afu_remove(struct cxl_afu *afu)
if (afu->eb_len)
device_remove_bin_file(&afu->dev, &afu->attr_eb);
- for (i = 0; i < ARRAY_SIZE(afu_attrs); i++)
- device_remove_file(&afu->dev, &afu_attrs[i]);
+ for (i = 0; i < ARRAY_SIZE(afu_attrs); i++) {
+ dev_attr = &afu_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_AFU_ATTRS))
+ device_remove_file(&afu->dev, &afu_attrs[i]);
+ }
list_for_each_entry_safe(cr, tmp, &afu->crs, list) {
sysfs_remove_bin_file(&cr->kobj, &cr->config_attr);
@@ -590,14 +616,19 @@ void cxl_sysfs_afu_remove(struct cxl_afu *afu)
int cxl_sysfs_afu_add(struct cxl_afu *afu)
{
+ struct device_attribute *dev_attr;
struct afu_config_record *cr;
int i, rc;
INIT_LIST_HEAD(&afu->crs);
for (i = 0; i < ARRAY_SIZE(afu_attrs); i++) {
- if ((rc = device_create_file(&afu->dev, &afu_attrs[i])))
- goto err;
+ dev_attr = &afu_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_AFU_ATTRS)) {
+ if ((rc = device_create_file(&afu->dev, &afu_attrs[i])))
+ goto err;
+ }
}
/* conditionally create the add the binary file for error info buffer */
@@ -636,32 +667,50 @@ err:
/* reset the eb_len as we havent created the bin attr */
afu->eb_len = 0;
- for (i--; i >= 0; i--)
+ for (i--; i >= 0; i--) {
+ dev_attr = &afu_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_AFU_ATTRS))
device_remove_file(&afu->dev, &afu_attrs[i]);
+ }
return rc;
}
int cxl_sysfs_afu_m_add(struct cxl_afu *afu)
{
+ struct device_attribute *dev_attr;
int i, rc;
for (i = 0; i < ARRAY_SIZE(afu_master_attrs); i++) {
- if ((rc = device_create_file(afu->chardev_m, &afu_master_attrs[i])))
- goto err;
+ dev_attr = &afu_master_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_AFU_MASTER_ATTRS)) {
+ if ((rc = device_create_file(afu->chardev_m, &afu_master_attrs[i])))
+ goto err;
+ }
}
return 0;
err:
- for (i--; i >= 0; i--)
- device_remove_file(afu->chardev_m, &afu_master_attrs[i]);
+ for (i--; i >= 0; i--) {
+ dev_attr = &afu_master_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_AFU_MASTER_ATTRS))
+ device_remove_file(afu->chardev_m, &afu_master_attrs[i]);
+ }
return rc;
}
void cxl_sysfs_afu_m_remove(struct cxl_afu *afu)
{
+ struct device_attribute *dev_attr;
int i;
- for (i = 0; i < ARRAY_SIZE(afu_master_attrs); i++)
- device_remove_file(afu->chardev_m, &afu_master_attrs[i]);
+ for (i = 0; i < ARRAY_SIZE(afu_master_attrs); i++) {
+ dev_attr = &afu_master_attrs[i];
+ if (cxl_ops->support_attributes(dev_attr->attr.name,
+ CXL_AFU_MASTER_ATTRS))
+ device_remove_file(afu->chardev_m, &afu_master_attrs[i]);
+ }
}
--
1.9.1
next prev parent reply other threads:[~2016-03-04 11:27 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 11:26 [PATCH v6 00/20] cxl: Add support for powerVM guest Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 01/20] cxl: Move common code away from bare-metal-specific files Frederic Barrat
2016-03-10 2:03 ` [v6, " Michael Ellerman
2016-03-04 11:26 ` [PATCH v6 02/20] cxl: Move bare-metal specific code to specialized files Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 03/20] cxl: Define process problem state area at attach time only Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 04/20] cxl: Introduce implementation-specific API Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 05/20] cxl: Rename some bare-metal specific functions Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 06/20] cxl: Isolate a few bare-metal-specific calls Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 07/20] cxl: Update cxl_irq() prototype Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 08/20] cxl: IRQ allocation for guests Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 09/20] powerpc: New possible return value from hcall Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 10/20] cxl: New hcalls to support cxl adapters Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 11/20] cxl: Separate bare-metal fields in adapter and AFU data structures Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 12/20] cxl: Add guest-specific code Frederic Barrat
2016-03-09 5:55 ` [v6,12/20] " Michael Ellerman
2016-03-09 9:14 ` Frederic Barrat
2016-03-09 10:31 ` Michael Ellerman
2016-03-09 12:42 ` Michael Ellerman
2016-03-09 12:57 ` Michael Ellerman
2016-03-09 14:20 ` Frederic Barrat
2016-03-04 11:26 ` Frederic Barrat [this message]
2016-03-07 5:21 ` [PATCH v6 13/20] cxl: sysfs support for guests Ian Munsie
2016-03-04 11:26 ` [PATCH v6 14/20] cxl: Support to flash a new image on the adapter from a guest Frederic Barrat
2016-03-07 5:23 ` Ian Munsie
2016-03-04 11:26 ` [PATCH v6 15/20] cxl: Parse device tree and create cxl device(s) at boot Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 16/20] cxl: Support the cxl kernel API from a guest Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 17/20] cxl: Adapter failure handling Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 18/20] cxl: Add tracepoints around the cxl hcall Frederic Barrat
2016-03-04 11:26 ` [PATCH v6 19/20] cxlflash: Use new cxl_pci_read_adapter_vpd() API Frederic Barrat
2016-03-04 14:41 ` Uma Krishnan
2016-03-04 16:32 ` Matthew R. Ochs
2016-03-04 17:41 ` Manoj Kumar
2016-03-04 11:26 ` [PATCH v6 20/20] cxl: Remove cxl_get_phys_dev() kernel API Frederic Barrat
2016-03-07 5:25 ` Ian Munsie
2016-03-09 11:09 ` [v6,20/20] " Michael Ellerman
2016-03-09 11:35 ` Frederic Barrat
2016-03-07 5:28 ` [PATCH v6 00/20] cxl: Add support for powerVM guest Ian Munsie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457090804-9719-14-git-send-email-fbarrat@linux.vnet.ibm.com \
--to=fbarrat@linux.vnet.ibm.com \
--cc=imunsie@au1.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=manoj@linux.vnet.ibm.com \
--cc=michael.neuling@au1.ibm.com \
--cc=mrochs@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).