From: David Gibson <david@gibson.dropbear.id.au>
To: paulus@samba.org, aik@ozlabs.ru, benh@kernel.crashing.org
Cc: bharata@linux.vnet.ibm.com, linuxppc-dev@lists.ozlabs.org,
michael@ellerman.id.au,
David Gibson <david@gibson.dropbear.id.au>
Subject: [RFCv3 04/17] pseries: Automatically resize HPT for memory hot add/remove
Date: Mon, 21 Mar 2016 14:53:11 +1100 [thread overview]
Message-ID: <1458532404-21258-5-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1458532404-21258-1-git-send-email-david@gibson.dropbear.id.au>
We've now implemented code in the pseries platform to use the new PAPR
interface to allow resizing the hash page table (HPT) at runtime.
This patch uses that interface to automatically attempt to resize the HPT
when memory is hot added or removed. This tries to always keep the HPT at
a reasonable size for our current memory size.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Mackerras <paulus@samba.org>
---
arch/powerpc/include/asm/sparsemem.h | 1 +
arch/powerpc/mm/hash_utils_64.c | 29 +++++++++++++++++++++++++++++
arch/powerpc/mm/mem.c | 4 ++++
3 files changed, 34 insertions(+)
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index f6fc0ee..737335c 100644
--- a/arch/powerpc/include/asm/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -16,6 +16,7 @@
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_MEMORY_HOTPLUG
+extern void resize_hpt_for_hotplug(unsigned long new_mem_size);
extern int create_section_mapping(unsigned long start, unsigned long end);
extern int remove_section_mapping(unsigned long start, unsigned long end);
#ifdef CONFIG_NUMA
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index f27347a..8ae9097 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -647,6 +647,35 @@ static unsigned long __init htab_get_table_size(void)
}
#ifdef CONFIG_MEMORY_HOTPLUG
+void resize_hpt_for_hotplug(unsigned long new_mem_size)
+{
+ unsigned target_hpt_shift;
+
+ if (!ppc_md.resize_hpt)
+ return;
+
+ target_hpt_shift = htab_shift_for_mem_size(new_mem_size);
+
+ /*
+ * To avoid lots of HPT resizes if memory size is fluctuating
+ * across a boundary, we deliberately have some hysterisis
+ * here: we immediately increase the HPT size if the target
+ * shift exceeds the current shift, but we won't attempt to
+ * reduce unless the target shift is at least 2 below the
+ * current shift
+ */
+ if ((target_hpt_shift > ppc64_pft_size)
+ || (target_hpt_shift < (ppc64_pft_size - 1))) {
+ int rc;
+
+ rc = ppc_md.resize_hpt(target_hpt_shift);
+ if (rc)
+ printk(KERN_WARNING
+ "Unable to resize hash page table to target order %d: %d\n",
+ target_hpt_shift, rc);
+ }
+}
+
int create_section_mapping(unsigned long start, unsigned long end)
{
int rc = htab_bolt_mapping(start, end, __pa(start),
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index ac79dbd..be733be 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -121,6 +121,8 @@ int arch_add_memory(int nid, u64 start, u64 size, bool for_device)
unsigned long nr_pages = size >> PAGE_SHIFT;
int rc;
+ resize_hpt_for_hotplug(memblock_phys_mem_size());
+
pgdata = NODE_DATA(nid);
start = (unsigned long)__va(start);
@@ -161,6 +163,8 @@ int arch_remove_memory(u64 start, u64 size)
*/
vm_unmap_aliases();
+ resize_hpt_for_hotplug(memblock_phys_mem_size());
+
return ret;
}
#endif
--
2.5.0
next prev parent reply other threads:[~2016-03-21 3:52 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 3:53 [RFCv3 00/17] PAPR HPT resizing, guest & host side David Gibson
2016-03-21 3:53 ` [RFCv3 01/17] pseries: Add hypercall wrappers for hash page table resizing David Gibson
2016-03-21 3:53 ` [RFCv3 02/17] pseries: Add support for hash " David Gibson
2016-03-21 3:53 ` [RFCv3 03/17] pseries: Advertise HPT resizing support via CAS David Gibson
2016-03-21 3:53 ` David Gibson [this message]
2016-03-21 3:53 ` [RFCv3 05/17] powerpc/kvm: Corectly report KVM_CAP_PPC_ALLOC_HTAB David Gibson
2016-03-21 3:53 ` [RFCv3 06/17] powerpc/kvm: Add capability flag for hashed page table resizing David Gibson
2016-03-21 3:53 ` [RFCv3 07/17] powerpc/kvm: Rename kvm_alloc_hpt() for clarity David Gibson
2016-03-21 3:53 ` [RFCv3 08/17] powerpc/kvm: Gather HPT related variables into sub-structure David Gibson
2016-03-21 3:53 ` [RFCv3 09/17] powerpc/kvm: Don't store values derivable from HPT order David Gibson
2016-03-21 3:53 ` [RFCv3 10/17] powerpc/kvm: Split HPT allocation from activation David Gibson
2016-03-21 3:53 ` [RFCv3 11/17] powerpc/kvm: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size David Gibson
2016-03-21 3:53 ` [RFCv3 12/17] powerpc/kvm: Create kvmppc_unmap_hpte_helper() David Gibson
2016-03-21 3:53 ` [RFCv3 13/17] powerpc/kvm: KVM-HV HPT resizing stub implementation David Gibson
2016-03-21 3:53 ` [RFCv3 14/17] powerpc/kvm: Outline of KVM-HV HPT resizing implementation David Gibson
2016-03-21 3:53 ` [RFCv3 15/17] powerpc/kvm: KVM-HV HPT resizing, preparation path David Gibson
2016-03-21 3:53 ` [RFCv3 16/17] powerpc/kvm: HVM-HV HPT resizing, commit path David Gibson
2016-03-21 3:53 ` [RFCv3 17/17] powerpc/kvm: Advertise availablity of HPT resizing on KVM HV David Gibson
2016-03-21 5:46 ` [RFCv3 00/17] PAPR HPT resizing, guest & host side David Gibson
2016-08-25 12:38 ` Paul Mackerras
2016-08-25 17:57 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458532404-21258-5-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=aik@ozlabs.ru \
--cc=benh@kernel.crashing.org \
--cc=bharata@linux.vnet.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=michael@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).