From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH 39/65] powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code
Date: Sun, 27 Mar 2016 13:53:47 +0530 [thread overview]
Message-ID: <1459067053-10835-39-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1459067053-10835-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
We also use MMU_FTR_RADIX to branch out from code path specific to
hash.
No functionality change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/powerpc/kernel/entry_64.S | 7 +++++--
arch/powerpc/kernel/exceptions-64s.S | 28 +++++++++++++++++++++++-----
arch/powerpc/kernel/machine_kexec_64.c | 6 ++++--
arch/powerpc/kernel/mce_power.c | 10 ++++++++++
arch/powerpc/kernel/process.c | 15 +++++++++------
arch/powerpc/xmon/xmon.c | 2 +-
6 files changed, 52 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 038e0a1425e7..5b97a79b7a31 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -510,7 +510,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
std r6,PACACURRENT(r13) /* Set new 'current' */
ld r8,KSP(r4) /* new stack pointer */
-#ifdef CONFIG_PPC_BOOK3S
+#ifdef CONFIG_PPC_STD_MMU_64
+BEGIN_MMU_FTR_SECTION
+ b 2f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_RADIX)
BEGIN_FTR_SECTION
clrrdi r6,r8,28 /* get its ESID */
clrrdi r9,r1,28 /* get current sp ESID */
@@ -556,7 +559,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
slbmte r7,r0
isync
2:
-#endif /* !CONFIG_PPC_BOOK3S */
+#endif /* CONFIG_PPC_STD_MMU_64 */
CURRENT_THREAD_INFO(r7, r8) /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 7716cebf4b8e..d2afec81d04d 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -983,7 +983,13 @@ data_access_common:
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+BEGIN_MMU_FTR_SECTION
b do_hash_page /* Try to handle as hpte fault */
+MMU_FTR_SECTION_ELSE
+ b handle_page_fault
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_RADIX)
.align 7
.globl h_data_storage_common
@@ -1008,7 +1014,13 @@ instruction_access_common:
ld r3,_NIP(r1)
andis. r4,r12,0x5820
li r5,0x400
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+BEGIN_MMU_FTR_SECTION
b do_hash_page /* Try to handle as hpte fault */
+MMU_FTR_SECTION_ELSE
+ b handle_page_fault
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_RADIX)
STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
@@ -1476,8 +1488,11 @@ slb_miss_realmode:
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+#ifdef CONFIG_PPC_STD_MMU_64
+BEGIN_MMU_FTR_SECTION
bl slb_allocate_realmode
-
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_RADIX)
+#endif
/* All done -- return from exception. */
ld r10,PACA_EXSLB+EX_LR(r13)
@@ -1485,7 +1500,9 @@ slb_miss_realmode:
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
mtlr r10
-
+BEGIN_MMU_FTR_SECTION
+ b 2f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_RADIX)
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
beq- 2f
@@ -1536,9 +1553,7 @@ power4_fixup_nap:
*/
.align 7
do_hash_page:
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
-
+#ifdef CONFIG_PPC_STD_MMU_64
andis. r0,r4,0xa410 /* weird error? */
bne- handle_page_fault /* if not, try to insert a HPTE */
andis. r0,r4,DSISR_DABRMATCH@h
@@ -1566,6 +1581,7 @@ do_hash_page:
/* Error */
blt- 13f
+#endif /* CONFIG_PPC_STD_MMU_64 */
/* Here we have a page fault that hash_page can't handle. */
handle_page_fault:
@@ -1592,6 +1608,7 @@ handle_dabr_fault:
12: b ret_from_except_lite
+#ifdef CONFIG_PPC_STD_MMU_64
/* We have a page fault that hash_page could handle but HV refused
* the PTE insertion
*/
@@ -1601,6 +1618,7 @@ handle_dabr_fault:
ld r4,_DAR(r1)
bl low_hash_fault
b ret_from_except
+#endif
/*
* We come here as a result of a DSI at a point where we don't want
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 0fbd75d185d7..1da864c00db0 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -76,6 +76,7 @@ int default_machine_kexec_prepare(struct kimage *image)
* end of the blocked region (begin >= high). Use the
* boolean identity !(a || b) === (!a && !b).
*/
+#ifdef CONFIG_PPC_STD_MMU_64
if (htab_address) {
low = __pa(htab_address);
high = low + htab_size_bytes;
@@ -88,6 +89,7 @@ int default_machine_kexec_prepare(struct kimage *image)
return -ETXTBSY;
}
}
+#endif /* CONFIG_PPC_STD_MMU_64 */
/* We also should not overwrite the tce tables */
for_each_node_by_type(node, "pci") {
@@ -381,7 +383,7 @@ void default_machine_kexec(struct kimage *image)
/* NOTREACHED */
}
-#ifndef CONFIG_PPC_BOOK3E
+#ifdef CONFIG_PPC_STD_MMU_64
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;
static unsigned long htab_size;
@@ -428,4 +430,4 @@ static int __init export_htab_values(void)
return 0;
}
late_initcall(export_htab_values);
-#endif /* !CONFIG_PPC_BOOK3E */
+#endif /* CONFIG_PPC_STD_MMU_64 */
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index ee62b197502d..92a66a2a9b85 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -77,6 +77,7 @@ void __flush_tlb_power9(unsigned int action)
/* flush SLBs and reload */
+#ifdef CONFIG_PPC_MMU_STD_64
static void flush_and_reload_slb(void)
{
struct slb_shadow *slb;
@@ -110,6 +111,7 @@ static void flush_and_reload_slb(void)
asm volatile("slbmte %0,%1" : : "r" (rs), "r" (rb));
}
}
+#endif
static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
{
@@ -120,6 +122,7 @@ static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
* reset the error bits whenever we handle them so that at the end
* we can check whether we handled all of them or not.
* */
+#ifdef CONFIG_PPC_MMU_STD_64
if (dsisr & slb_error_bits) {
flush_and_reload_slb();
/* reset error bits */
@@ -131,6 +134,7 @@ static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits)
/* reset error bits */
dsisr &= ~P7_DSISR_MC_TLB_MULTIHIT_MFTLB;
}
+#endif
/* Any other errors we don't understand? */
if (dsisr & 0xffffffffUL)
handled = 0;
@@ -150,6 +154,7 @@ static long mce_handle_common_ierror(uint64_t srr1)
switch (P7_SRR1_MC_IFETCH(srr1)) {
case 0:
break;
+#ifdef CONFIG_PPC_MMU_STD_64
case P7_SRR1_MC_IFETCH_SLB_PARITY:
case P7_SRR1_MC_IFETCH_SLB_MULTIHIT:
/* flush and reload SLBs for SLB errors. */
@@ -162,6 +167,7 @@ static long mce_handle_common_ierror(uint64_t srr1)
handled = 1;
}
break;
+#endif
default:
break;
}
@@ -175,10 +181,12 @@ static long mce_handle_ierror_p7(uint64_t srr1)
handled = mce_handle_common_ierror(srr1);
+#ifdef CONFIG_PPC_MMU_STD_64
if (P7_SRR1_MC_IFETCH(srr1) == P7_SRR1_MC_IFETCH_SLB_BOTH) {
flush_and_reload_slb();
handled = 1;
}
+#endif
return handled;
}
@@ -321,10 +329,12 @@ static long mce_handle_ierror_p8(uint64_t srr1)
handled = mce_handle_common_ierror(srr1);
+#ifdef CONFIG_PPC_MMU_STD_64
if (P7_SRR1_MC_IFETCH(srr1) == P8_SRR1_MC_IFETCH_ERAT_MULTIHIT) {
flush_and_reload_slb();
handled = 1;
}
+#endif
return handled;
}
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index d7a9df51b974..e35b018be765 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1075,7 +1075,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
}
#endif /* CONFIG_PPC64 */
-#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_STD_MMU_64
batch = this_cpu_ptr(&ppc64_tlb_batch);
if (batch->active) {
current_thread_info()->local_flags |= _TLF_LAZY_MMU;
@@ -1083,7 +1083,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
__flush_tlb_pending(batch);
batch->active = 0;
}
-#endif /* CONFIG_PPC_BOOK3S_64 */
+#endif /* CONFIG_PPC_STD_MMU_64 */
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
switch_booke_debug_regs(&new->thread.debug);
@@ -1129,7 +1129,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
last = _switch(old_thread, new_thread);
-#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_STD_MMU_64
if (current_thread_info()->local_flags & _TLF_LAZY_MMU) {
current_thread_info()->local_flags &= ~_TLF_LAZY_MMU;
batch = this_cpu_ptr(&ppc64_tlb_batch);
@@ -1138,8 +1138,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
if (current_thread_info()->task->thread.regs)
restore_math(current_thread_info()->task->thread.regs);
-
-#endif /* CONFIG_PPC_BOOK3S_64 */
+#endif /* CONFIG_PPC_STD_MMU_64 */
return last;
}
@@ -1374,6 +1373,9 @@ static void setup_ksp_vsid(struct task_struct *p, unsigned long sp)
unsigned long sp_vsid;
unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
+ if (radix_enabled())
+ return;
+
if (mmu_has_feature(MMU_FTR_1T_SEGMENT))
sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T)
<< SLB_VSID_SHIFT_1T;
@@ -1920,7 +1922,8 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
* the heap, we can put it above 1TB so it is backed by a 1TB
* segment. Otherwise the heap will be in the bottom 1TB
* which always uses 256MB segments and this may result in a
- * performance penalty.
+ * performance penalty. We don't need to worry about radix. For
+ * radix, mmu_highuser_ssize remains unchanged from 256MB.
*/
if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 942796fa4767..308283b7b60c 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2913,7 +2913,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
printf("%s", after);
}
-#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_STD_MMU_64
void dump_segments(void)
{
int i;
--
2.5.0
next prev parent reply other threads:[~2016-03-27 8:25 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-27 8:23 [PATCH 01/65] powerpc/mm: Use big endian page table for book3s 64 Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 02/65] powerpc/mm: use _PAGE_READ to indicate Read access Aneesh Kumar K.V
2016-03-27 15:35 ` Ian Munsie
2016-03-31 0:57 ` Balbir Singh
2016-04-04 14:55 ` Aneesh Kumar K.V
2016-04-05 3:25 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 03/65] powerpc/mm/subpage: Clear RWX bit to indicate no access Aneesh Kumar K.V
2016-03-31 1:42 ` Balbir Singh
2016-04-04 14:59 ` Aneesh Kumar K.V
2016-04-05 3:30 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 04/65] powerpc/mm: Use pte_user instead of opencoding Aneesh Kumar K.V
2016-03-31 1:45 ` Balbir Singh
2016-04-04 15:00 ` Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 05/65] powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED Aneesh Kumar K.V
2016-03-27 15:41 ` Ian Munsie
2016-03-27 8:23 ` [PATCH 06/65] powerpc/cxl: Use REGION_ID instead of opencoding Aneesh Kumar K.V
2016-03-27 15:48 ` Ian Munsie
2016-03-27 8:23 ` [PATCH 07/65] powerpc/mm: Remove RPN_SHIFT and RPN_SIZE Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 08/65] powerpc/mm: Update _PAGE_KERNEL_RO Aneesh Kumar K.V
2016-04-05 7:45 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 09/65] powerpc/mm: Use helper for finding pte bits mapping I/O area Aneesh Kumar K.V
2016-04-05 11:47 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 10/65] powerpc/mm: Drop WIMG in favour of new constants Aneesh Kumar K.V
2016-04-05 13:25 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 11/65] powerpc/mm: Use generic version of pmdp_clear_flush_young Aneesh Kumar K.V
2016-04-05 23:51 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 12/65] powerpc/mm: Use generic version of ptep_clear_flush_young Aneesh Kumar K.V
2016-04-05 23:53 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 13/65] powerpc/mm: Move common data structure between radix and hash to book3s 64 generic headers Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 14/65] powerpc/mm/power9: Add partition table format Aneesh Kumar K.V
2016-04-06 6:11 ` Balbir Singh
2016-03-27 8:23 ` [PATCH 15/65] powerpc/mm/hash: Add support for POWER9 hash Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 16/65] powerpc/mm: Move hash and no hash code to separate files Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 17/65] powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 18/65] powerpc/mm: Handle _PTE_NONE_MASK Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 19/65] powerpc/mm: Move common pte bits and accessors to book3s/64/pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 20/65] powerpc/mm: Move pte accessors that operate on common pte bits to pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 21/65] powerpc/mm: Make page table size a variable Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 22/65] powerpc/mm: Move page table index and and vaddr to pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 23/65] powerpc/mm: Move pte related function together Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 24/65] powerpc/mm/radix: Add radix pte defines Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 25/65] powerpc/mm/radix: Dummy radix_enabled() Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 26/65] powerpc/mm: Add radix callbacks to pte accessors Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 27/65] powerpc/mm: Move hugetlb and THP related pmd accessors to pgtable.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 28/65] powerpc/mm/radix: Add radix callback for pmd accessors Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 29/65] powerpc/mm: Abstraction for early init routines Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 30/65] powerpc/mm/radix: Add radix callback " Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 31/65] powerpc/mm: Abstraction for vmemmap and map_kernel_page Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 32/65] powerpc/mm/radix: Add radix callback for vmemmap and map_kernel page Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 33/65] powerpc/mm: Abstraction for switch_mmu_context Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 34/65] powerpc/mm/radix: Add mmu context handling callback for radix Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 35/65] powerpc/mm: Rename mmu_context_hash64.c to mmu_context_book3s64.c Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 36/65] powerpc/mm: Hash linux abstraction for tlbflush routines Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 37/65] powerpc/mm/radix: Add " Aneesh Kumar K.V
2016-03-27 10:00 ` kbuild test robot
2016-03-28 17:58 ` Aneesh Kumar K.V
2016-03-27 10:09 ` kbuild test robot
2016-03-27 10:11 ` kbuild test robot
2016-03-27 8:23 ` [PATCH 38/65] powerpc/mm/radix: Add MMU_FTR_RADIX Aneesh Kumar K.V
2016-03-27 8:23 ` Aneesh Kumar K.V [this message]
2016-03-27 8:23 ` [PATCH 40/65] powerpc/mm/radix: Isolate hash table function from pseries guest code Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 41/65] powerpc/mm/radix: Add checks in slice code to catch radix usage Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 42/65] powerpc/mm/radix: Limit paca allocation in radix Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 43/65] powerpc/mm/radix: Pick the address layout for radix config Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 44/65] powerpc/mm/radix: Update secondary PTCR Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 45/65] powerpc/mm: Make a copy of pgalloc.h for 32 and 64 book3s Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 46/65] powerpc/mm: revert changes made to generic pgalloc-64.h Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 47/65] powerpc/mm: Copy pgalloc (part 2) Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 48/65] powerpc/mm: Simplify the code dropping 4 level table #ifdef Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 49/65] powerpc/mm: Rename function to indicate we are allocating fragments Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 50/65] powerpc/mm: make 4k and 64k use pte_t for pgtable_t Aneesh Kumar K.V
2016-03-27 8:23 ` [PATCH 51/65] powerpc/mm: Add radix pgalloc details Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 52/65] powerpc/mm: Update pte filter for radix Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 53/65] powerpc/mm: VMALLOC abstraction Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 54/65] powerpc/radix: update mmu cache Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 55/65] powerpc/mm: pte_frag abstraction Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 56/65] powerpc/mm: Fix vma_mmu_pagesize for radix Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 57/65] powerpc/mm: Add radix support for hugetlb Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 58/65] powerpc/mm/radix: Make sure swapper pgdir is properly aligned Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 59/65] powerpc/mm/radix: Add hugetlb support 4K page size Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 60/65] powerpc/mm: Drop PTE_ATOMIC_UPDATES from pmd_hugepage_update Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 61/65] powerpc/mm: THP is only available on hash64 as of now Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 62/65] powerpc/mm/thp: Abstraction for THP functions Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 63/65] powerpc/mm/radix: Add radix THP callbacks Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 64/65] powerpc/mm/radix: Add THP support for 4k linux page size Aneesh Kumar K.V
2016-03-27 8:24 ` [PATCH 65/65] powerpc/mm/radix: Cputable update for radix Aneesh Kumar K.V
2016-03-30 1:01 ` Michael Neuling
2016-04-01 6:25 ` Michael Ellerman
2016-04-01 9:34 ` Aneesh Kumar K.V
2018-06-28 23:55 ` Benjamin Herrenschmidt
2016-03-30 10:53 ` [PATCH 01/65] powerpc/mm: Use big endian page table for book3s 64 Balbir Singh
2016-04-04 15:03 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459067053-10835-39-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).