From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH V2 67/68] powerpc/mm/radix: Cputable update for radix
Date: Sat, 9 Apr 2016 11:44:03 +0530 [thread overview]
Message-ID: <1460182444-2468-68-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1460182444-2468-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
With P9 Radix we need to do
* set UPRT = 1
* set different TLB set count
In this patch we delay the UPRT=1 to early mmu init. This help us to
keep the cpu table setup and restore cpu callback the same across
different MMU model.
This also implies that a cpu_restore cur_cpu_spec callback won't set
UPRT=1. We currently use that for secondary cpu init and on primary
after we did an opal reinit for endian switch. In both the case
we call early_mmu_init after the above operations. This set UPRT
to correct value.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/reg.h | 4 ++++
arch/powerpc/kernel/cputable.c | 2 +-
arch/powerpc/kernel/mce_power.c | 3 ++-
arch/powerpc/mm/pgtable-radix.c | 13 +++++++++++++
4 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index b546e6f28d44..3400ed884f10 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -347,6 +347,10 @@
#define LPCR_LPES_SH 2
#define LPCR_RMI 0x00000002 /* real mode is cache inhibit */
#define LPCR_HDICE 0x00000001 /* Hyp Decr enable (HV,PR,EE) */
+/*
+ * Used in asm code, hence we don't want to use PPC_BITCOUNT
+ */
+#define LPCR_UPRT (ASM_CONST(0x1) << 22)
#ifndef SPRN_LPID
#define SPRN_LPID 0x13F /* Logical Partition Identifier */
#endif
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 6c662b8de90d..e009722d5914 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -514,7 +514,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_POWER9,
.cpu_user_features = COMMON_USER_POWER9,
.cpu_user_features2 = COMMON_USER2_POWER9,
- .mmu_features = MMU_FTRS_POWER9,
+ .mmu_features = MMU_FTRS_POWER9 | MMU_FTR_RADIX,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index 92a66a2a9b85..4a8c3bdfce5c 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -72,10 +72,11 @@ void __flush_tlb_power8(unsigned int action)
void __flush_tlb_power9(unsigned int action)
{
+ if (radix_enabled())
+ flush_tlb_206(POWER9_TLB_SETS_RADIX, action);
flush_tlb_206(POWER9_TLB_SETS_HASH, action);
}
-
/* flush SLBs and reload */
#ifdef CONFIG_PPC_MMU_STD_64
static void flush_and_reload_slb(void)
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index be95d1ef35a0..89a4ee26b879 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -296,6 +296,13 @@ found:
void __init rearly_init_mmu(void)
{
+ unsigned long lpcr;
+ /*
+ * setup LPCR UPRT based on mmu_features
+ */
+ lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
+
#ifdef CONFIG_PPC_64K_PAGES
/* PAGE_SIZE mappings */
mmu_virtual_psize = MMU_PAGE_64K;
@@ -345,6 +352,12 @@ void __init rearly_init_mmu(void)
void rearly_init_mmu_secondary(void)
{
+ unsigned long lpcr;
+ /*
+ * setup LPCR UPRT based on mmu_features
+ */
+ lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
/*
* update partition table control register, 64 K size.
*/
--
2.5.0
next prev parent reply other threads:[~2016-04-09 6:17 UTC|newest]
Thread overview: 139+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-09 6:12 [PATCH V2 00/68] PowerISA 3.0 Radix page table support Aneesh Kumar K.V
2016-04-09 6:12 ` [PATCH V2 01/68] powerpc/cxl: Use REGION_ID instead of opencoding Aneesh Kumar K.V
2016-04-11 0:37 ` Andrew Donnellan
2016-04-13 2:42 ` Aneesh Kumar K.V
2016-04-20 3:03 ` Michael Ellerman
2016-04-20 7:53 ` Aneesh Kumar K.V
2016-04-09 6:12 ` [PATCH V2 02/68] powerpc/mm/nohash: Return correctly from flush_tlb_page Aneesh Kumar K.V
2016-04-20 4:08 ` [V2, " Michael Ellerman
2016-04-20 7:49 ` Aneesh Kumar K.V
2016-04-09 6:12 ` [PATCH V2 03/68] powerpc/mm/nohash: Update non SMP version of flush_tlb_page to handle hugetlb address Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 04/68] powerpc/mm: Use big endian page table for book3s 64 Aneesh Kumar K.V
2016-04-22 11:01 ` Michael Ellerman
2016-04-24 22:29 ` Aneesh Kumar K.V
2016-05-29 11:03 ` Anton Blanchard
2016-05-29 21:27 ` Benjamin Herrenschmidt
2016-05-29 23:08 ` Anton Blanchard
2016-05-30 3:42 ` Michael Ellerman
2016-05-30 5:31 ` Anton Blanchard
2016-05-30 8:42 ` Aneesh Kumar K.V
2016-05-30 11:00 ` Benjamin Herrenschmidt
2016-05-30 14:48 ` Aneesh Kumar K.V
2016-05-30 14:59 ` Segher Boessenkool
2016-04-09 6:13 ` [PATCH V2 05/68] powerpc/mm: use _PAGE_READ to indicate Read access Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 06/68] powerpc/mm/subpage: Clear RWX bit to indicate no access Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 07/68] powerpc/mm: Use pte_user instead of opencoding Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 08/68] powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 09/68] powerpc/mm: Remove RPN_SHIFT and RPN_SIZE Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 10/68] powerpc/mm: Update _PAGE_KERNEL_RO Aneesh Kumar K.V
2016-11-20 0:43 ` [V2,10/68] " Geoff Levand
2016-11-20 18:03 ` Aneesh Kumar K.V
2016-11-21 0:33 ` Geoff Levand
2016-11-23 10:41 ` Aneesh Kumar K.V
2016-11-24 4:04 ` Geoff Levand
2016-04-09 6:13 ` [PATCH V2 11/68] powerpc/mm: Use helper for finding pte bits mapping I/O area Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 12/68] powerpc/mm: Drop WIMG in favour of new constants Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 13/68] powerpc/mm: Use generic version of pmdp_clear_flush_young Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 14/68] powerpc/mm: Use generic version of ptep_clear_flush_young Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 15/68] powerpc/mm: Move common data structure between radix and hash to book3s 64 generic headers Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 16/68] powerpc/mm/power9: Add partition table format Aneesh Kumar K.V
2016-04-11 0:59 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 17/68] powerpc/mm/hash: Add support for POWER9 hash Aneesh Kumar K.V
2016-04-11 4:55 ` Balbir Singh
2016-04-16 19:06 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 18/68] powerpc/mm: Move hash and no hash code to separate files Aneesh Kumar K.V
2016-04-11 5:14 ` Balbir Singh
2016-04-17 10:20 ` Aneesh Kumar K.V
2016-04-20 6:17 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 19/68] powerpc/mm/book3s: Rename hash specific PTE bits to carry H_ prefix Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 20/68] powerpc/mm: Handle _PTE_NONE_MASK Aneesh Kumar K.V
2016-04-11 6:09 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 21/68] powerpc/mm: Move common pte bits and accessors to book3s/64/pgtable.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 22/68] powerpc/mm: Move pte accessors that operate on common pte bits to pgtable.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 23/68] powerpc/mm: Make page table size a variable Aneesh Kumar K.V
2016-04-12 1:49 ` Balbir Singh
2016-04-17 10:27 ` Aneesh Kumar K.V
2016-04-20 6:21 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 24/68] powerpc/mm: Move page table index and and vaddr to pgtable.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 25/68] powerpc/mm: Move pte related function together Aneesh Kumar K.V
2016-04-14 6:50 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 26/68] powerpc/mm/radix: Add radix pte defines Aneesh Kumar K.V
2016-04-21 4:12 ` Balbir Singh
2016-04-23 8:30 ` Benjamin Herrenschmidt
2016-04-26 1:40 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 27/68] powerpc/mm/radix: Dummy radix_enabled() Aneesh Kumar K.V
2016-04-21 4:27 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 28/68] powerpc/mm: Add radix callbacks to pte accessors Aneesh Kumar K.V
2016-04-21 4:30 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 29/68] powerpc/mm: Move hugetlb and THP related pmd accessors to pgtable.h Aneesh Kumar K.V
2016-04-21 9:53 ` Balbir Singh
2016-04-21 9:59 ` Michael Ellerman
2016-04-21 11:42 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 30/68] powerpc/mm/radix: Add radix callback for pmd accessors Aneesh Kumar K.V
2016-04-21 11:39 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 31/68] powerpc/mm: Abstraction for early init routines Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 32/68] powerpc/mm/radix: Add radix callback " Aneesh Kumar K.V
2016-04-21 12:22 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 33/68] powerpc/mm: Abstraction for vmemmap and map_kernel_page Aneesh Kumar K.V
2016-04-21 12:59 ` Balbir Singh
2016-04-28 6:17 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 34/68] powerpc/mm/radix: Add radix callback for vmemmap and map_kernel page Aneesh Kumar K.V
2016-04-21 13:46 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 35/68] powerpc/mm: Abstraction for switch_mmu_context Aneesh Kumar K.V
2016-04-21 14:12 ` Balbir Singh
2016-04-28 6:13 ` Aneesh Kumar K.V
2016-04-28 6:13 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 36/68] powerpc/mm/radix: Add mmu context handling callback for radix Aneesh Kumar K.V
2016-04-22 6:19 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 37/68] powerpc/mm: Rename mmu_context_hash64.c to mmu_context_book3s64.c Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 38/68] powerpc/mm: Hash linux abstraction for tlbflush routines Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 39/68] powerpc/mm/radix: Add " Aneesh Kumar K.V
2016-04-22 7:20 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 40/68] powerpc/mm/radix: Add MMU_FTR_RADIX Aneesh Kumar K.V
2016-04-22 7:23 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 41/68] powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code Aneesh Kumar K.V
2016-04-22 7:32 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 42/68] powerpc/mm/radix: Isolate hash table function from pseries guest code Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 43/68] powerpc/mm/radix: Add checks in slice code to catch radix usage Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 44/68] powerpc/mm/radix: Limit paca allocation in radix Aneesh Kumar K.V
2016-04-22 8:07 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 45/68] powerpc/mm/radix: Pick the address layout for radix config Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 46/68] powerpc/mm/radix: Update secondary PTCR Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 47/68] powerpc/mm: Make a copy of pgalloc.h for 32 and 64 book3s Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 48/68] powerpc/mm: Copy pgalloc (part 2) Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 49/68] powerpc/mm: Revert changes made to nohash pgalloc-64.h Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 50/68] powerpc/mm: Simplify the code dropping 4 level table #ifdef Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 51/68] powerpc/mm: Rename function to indicate we are allocating fragments Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 52/68] powerpc/mm: make 4k and 64k use pte_t for pgtable_t Aneesh Kumar K.V
2016-04-26 2:58 ` Balbir Singh
2016-04-28 6:03 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 53/68] powerpc/mm: Add radix pgalloc details Aneesh Kumar K.V
2016-04-26 3:05 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 54/68] powerpc/mm: Update pte filter for radix Aneesh Kumar K.V
2016-04-26 3:06 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 55/68] powerpc/mm: VMALLOC abstraction Aneesh Kumar K.V
2016-04-22 6:52 ` Michael Neuling
2016-04-23 3:29 ` Aneesh Kumar K.V
2016-04-26 6:20 ` Balbir Singh
2016-04-26 4:47 ` Balbir Singh
2016-04-28 6:09 ` Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 56/68] powerpc/radix: update mmu cache Aneesh Kumar K.V
2016-04-26 6:23 ` Balbir Singh
2016-04-09 6:13 ` [PATCH V2 57/68] powerpc/mm: pte_frag abstraction Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 58/68] powerpc/mm: Fix vma_mmu_pagesize for radix Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 59/68] powerpc/mm: Add radix support for hugetlb Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 60/68] powerpc/mm/radix: Make sure swapper pgdir is properly aligned Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 61/68] powerpc/mm/radix: Add hugetlb support 4K page size Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 62/68] powerpc/mm: Drop PTE_ATOMIC_UPDATES from pmd_hugepage_update Aneesh Kumar K.V
2016-04-09 6:13 ` [PATCH V2 63/68] powerpc/mm: THP is only available on hash64 as of now Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 64/68] powerpc/mm/thp: Abstraction for THP functions Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 65/68] powerpc/mm/radix: Add radix THP callbacks Aneesh Kumar K.V
2016-04-09 6:14 ` [PATCH V2 66/68] powerpc/mm/radix: Add THP support for 4k linux page size Aneesh Kumar K.V
2016-04-28 4:56 ` [V2, " Michael Ellerman
2016-04-28 6:28 ` Aneesh Kumar K.V
2016-04-09 6:14 ` Aneesh Kumar K.V [this message]
2016-04-28 14:10 ` [V2,67/68] powerpc/mm/radix: Cputable update for radix Michael Ellerman
2016-04-09 6:14 ` [PATCH V2 68/68] powerpc/mm/radix: Use firmware feature to disable radix Aneesh Kumar K.V
2016-04-20 2:59 ` [V2, " Michael Ellerman
2016-04-20 8:21 ` Aneesh Kumar K.V
2016-04-20 11:25 ` Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460182444-2468-68-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).