linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/9] powerpc/powernv/cpuidle: Add support for POWER ISA v3 idle states
@ 2016-04-21 13:49 Shreyas B. Prabhu
  2016-04-21 13:49 ` [PATCH 1/9] powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header Shreyas B. Prabhu
                   ` (8 more replies)
  0 siblings, 9 replies; 12+ messages in thread
From: Shreyas B. Prabhu @ 2016-04-21 13:49 UTC (permalink / raw)
  To: mpe
  Cc: linuxppc-dev, paulus, linux-kernel, mikey, Shreyas B. Prabhu,
	Rafael J. Wysocki, Daniel Lezcano, linux-pm

POWER ISA v3 defines a new idle processor core mechanism. In summary,
 a) new instruction named stop is added. This instruction replaces
	instructions like nap, sleep, rvwinkle.
 b) new per thread SPR named PSSCR is added which controls the behavior
	of stop instruction. 
		
PSSCR has following key fields
	Bits 0:3  - Power-Saving Level Status. This field indicates the
	lowest power-saving state the thread entered since stop
	instruction was last executed.
		
	Bit 42 - Enable State Loss                          
	0 - No state is lost irrespective of other fields  
	1 - Allows state loss
		
	Bits 44:47 - Power-Saving Level Limit      
	This limits the power-saving level that can be entered into.
		
	Bits 60:63 - Requested Level              
	Used to specify which power-saving level must be entered on
	executing stop instruction
		
Stop idle states and their properties like name, latency, target
residency, psscr value are exposed via device tree.

This patch series adds support for this new mechanism.

Patches 1-6 are cleanups and code movement.
Patch 7 adds platform specific support for stop and psscr handling.
Patch 8 adds cpuidle driver support.
Patch 9 makes offlined cpu use stop state.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: linuxppc-dev@lists.ozlabs.org

Shreyas B. Prabhu (9):
  powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header
  powerpc/kvm: make hypervisor state restore a function
  powerpc/powernv: Move idle code usable by multiple hardware to common
    location
  powerpc/powernv: Make power7_powersave_common more generic
  powerpc/powernv: Move idle related macros to cpuidle.h
  powerpc/powernv: set power_save func after the idle states are
    initialized
  powerpc/powernv: Add platform support for stop instruction
  cpuidle/powernv: Add support for POWER ISA v3 idle states
  powerpc/powernv: Use deepest stop state when cpu is offlined

 arch/powerpc/include/asm/cpuidle.h        |  29 ++++
 arch/powerpc/include/asm/cputable.h       |   4 +-
 arch/powerpc/include/asm/exception-64s.h  |  18 +++
 arch/powerpc/include/asm/kvm_book3s_asm.h |   2 +-
 arch/powerpc/include/asm/machdep.h        |   1 +
 arch/powerpc/include/asm/opal-api.h       |  11 +-
 arch/powerpc/include/asm/paca.h           |   4 +
 arch/powerpc/include/asm/ppc-opcode.h     |   4 +
 arch/powerpc/include/asm/processor.h      |   1 +
 arch/powerpc/include/asm/reg.h            |  11 ++
 arch/powerpc/kernel/Makefile              |   2 +
 arch/powerpc/kernel/asm-offsets.c         |   4 +
 arch/powerpc/kernel/exceptions-64s.S      |  29 +---
 arch/powerpc/kernel/idle_power7.S         | 212 +++-------------------------
 arch/powerpc/kernel/idle_power_common.S   | 185 +++++++++++++++++++++++++
 arch/powerpc/kernel/idle_power_stop.S     | 221 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/Kconfig            |   4 +
 arch/powerpc/platforms/powernv/Kconfig    |   1 +
 arch/powerpc/platforms/powernv/idle.c     |  94 +++++++++++--
 arch/powerpc/platforms/powernv/powernv.h  |   1 +
 arch/powerpc/platforms/powernv/setup.c    |   2 +-
 arch/powerpc/platforms/powernv/smp.c      |   4 +-
 drivers/cpuidle/cpuidle-powernv.c         |  57 +++++++-
 23 files changed, 662 insertions(+), 239 deletions(-)
 create mode 100644 arch/powerpc/kernel/idle_power_common.S
 create mode 100644 arch/powerpc/kernel/idle_power_stop.S

-- 
2.1.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2016-05-03  6:30 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-21 13:49 [PATCH 0/9] powerpc/powernv/cpuidle: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 1/9] powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 2/9] powerpc/kvm: make hypervisor state restore a function Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 3/9] powerpc/powernv: Move idle code usable by multiple hardware to common location Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 4/9] powerpc/powernv: Make power7_powersave_common more generic Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 5/9] powerpc/powernv: Move idle related macros to cpuidle.h Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 6/9] powerpc/powernv: set power_save func after the idle states are initialized Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 7/9] powerpc/powernv: Add platform support for stop instruction Shreyas B. Prabhu
2016-05-03  5:25   ` Michael Neuling
2016-05-03  6:29     ` Shreyas B Prabhu
2016-04-21 13:49 ` [PATCH 8/9] cpuidle/powernv: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-04-21 13:49 ` [PATCH 9/9] powerpc/powernv: Use deepest stop state when cpu is offlined Shreyas B. Prabhu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).