[PATCH v9 16/26] powerpc/powernv/ioda1: Improve DMA32 segment track

[Gavin Shan <gwshan@linux.vnet.ibm.com>]

In current implementation, the DMA32 segments required by one specific
PE isn't calculated with the information hold in the PE independently.
It conflicts with the PCI hotplug design: PE centralized, meaning the
PE's DMA32 segments should be calculated from the information hold in
the PE independently.

This introduces an array (@dma32_segmap) for every PHB to track the
DMA32 segmeng usage. Besides, this moves the logic calculating PE's
consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's
DMA32 segments are calculated/allocated from the information hold in
the PE (DMA32 weight). Also the logic is improved: we try to allocate
as much DMA32 segments as we can. It's acceptable that number of DMA32
segments less than the expected number are allocated.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 110 ++++++++++++++++--------------
 arch/powerpc/platforms/powernv/pci.h      |   7 +-
 2 files changed, 61 insertions(+), 56 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index f70a4e0..cfd2906 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2011,27 +2011,57 @@ static unsigned int pnv_pci_ioda_pe_dma_weight(struct pnv_ioda_pe *pe)
 }
 
 static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
-				       struct pnv_ioda_pe *pe,
-				       unsigned int base,
-				       unsigned int segs)
+				       struct pnv_ioda_pe *pe)
 {
 
 	struct page *tce_mem = NULL;
 	struct iommu_table *tbl;
-	unsigned int tce32_segsz, i;
+	unsigned int weight, total_weight = 0;
+	unsigned int tce32_segsz, base, segs, i;
 	int64_t rc;
 	void *addr;
 
 	/* XXX FIXME: Handle 64-bit only DMA devices */
 	/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
 	/* XXX FIXME: Allocate multi-level tables on PHB3 */
+	pci_walk_bus(phb->hose->bus, pnv_pci_ioda_dev_dma_weight,
+		     &total_weight);
+	weight = pnv_pci_ioda_pe_dma_weight(pe);
+
+	segs = (weight * phb->ioda.dma32_count) / total_weight;
+	if (!segs)
+		segs = 1;
+
+	/*
+	 * Allocate contiguous DMA32 segments. We begin with the expected
+	 * number of segments. With one more attempt, the number of DMA32
+	 * segments to be allocated is decreased by one until one segment
+	 * is allocated successfully.
+	 */
+	do {
+		for (base = 0; base <= phb->ioda.dma32_count - segs; base++) {
+			for (i = base; i < base + segs; i++) {
+				if (phb->ioda.dma32_segmap[i] !=
+				    IODA_INVALID_PE)
+					goto found;
+			}
+		}
+	} while (segs--);
+
+	if (!segs) {
+		pe_warn(pe, "No available DMA32 segments\n");
+		return;
+	}
 
+found:
 	tbl = pnv_pci_table_alloc(phb->hose->node);
 	iommu_register_group(&pe->table_group, phb->hose->global_number,
 			pe->pe_number);
 	pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group);
 
 	/* Grab a 32-bit TCE table */
+	pe_info(pe, "DMA weight %d (%d), assigned (%d) %d DMA32 segments\n",
+		weight, total_weight, base, segs);
 	pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
 		base * PNV_IODA1_DMA32_SEGSIZE,
 		(base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
@@ -2068,6 +2098,10 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
 		}
 	}
 
+	/* Setup DMA32 segment mapping */
+	for (i = base; i < base + segs; i++)
+		phb->ioda.dma32_segmap[i] = pe->pe_number;
+
 	/* Setup linux iommu table */
 	pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
 				  base * PNV_IODA1_DMA32_SEGSIZE,
@@ -2542,73 +2576,34 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 static void pnv_ioda_setup_dma(struct pnv_phb *phb)
 {
 	struct pci_controller *hose = phb->hose;
-	unsigned int weight, total_weight, dma_pe_count;
-	unsigned int residual, remaining, segs, base;
 	struct pnv_ioda_pe *pe;
-
-	total_weight = 0;
-	pci_walk_bus(phb->hose->bus, pnv_pci_ioda_dev_dma_weight,
-		     &total_weight);
-
-	dma_pe_count = 0;
-	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-		weight = pnv_pci_ioda_pe_dma_weight(pe);
-		if (weight > 0)
-			dma_pe_count++;
-	}
+	unsigned int weight;
 
 	/* If we have more PE# than segments available, hand out one
 	 * per PE until we run out and let the rest fail. If not,
 	 * then we assign at least one segment per PE, plus more based
 	 * on the amount of devices under that PE
 	 */
-	if (dma_pe_count > phb->ioda.tce32_count)
-		residual = 0;
-	else
-		residual = phb->ioda.tce32_count - dma_pe_count;
-
-	pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
-		hose->global_number, phb->ioda.tce32_count);
-	pr_info("PCI: %d PE# for a total weight of %d\n",
-		dma_pe_count, total_weight);
+	pr_info("PCI: Domain %04x has %d available 32-bit DMA segments\n",
+		hose->global_number, phb->ioda.dma32_count);
 
 	pnv_pci_ioda_setup_opal_tce_kill(phb);
 
-	/* Walk our PE list and configure their DMA segments, hand them
-	 * out one base segment plus any residual segments based on
-	 * weight
-	 */
-	remaining = phb->ioda.tce32_count;
-	base = 0;
+	/* Walk our PE list and configure their DMA segments */
 	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
 		weight = pnv_pci_ioda_pe_dma_weight(pe);
 		if (!weight)
 			continue;
 
-		if (!remaining) {
-			pe_warn(pe, "No DMA32 resources available\n");
-			continue;
-		}
-		segs = 1;
-		if (residual) {
-			segs += ((weight * residual) + (total_weight / 2)) /
-				total_weight;
-			if (segs > remaining)
-				segs = remaining;
-		}
-
 		/*
 		 * For IODA2 compliant PHB3, we needn't care about the weight.
 		 * The all available 32-bits DMA space will be assigned to
 		 * the specific PE.
 		 */
 		if (phb->type == PNV_PHB_IODA1) {
-			pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
-				weight, segs);
-			pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs);
+			pnv_pci_ioda1_setup_dma_pe(phb, pe);
 		} else if (phb->type == PNV_PHB_IODA2) {
 			pe_info(pe, "Assign DMA32 space\n");
-			segs = 0;
 			pnv_pci_ioda2_setup_dma_pe(phb, pe);
 		} else if (phb->type == PNV_PHB_NPU) {
 			/*
@@ -2618,9 +2613,6 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb)
 			 * as the PHB3 TVT.
 			 */
 		}
-
-		remaining -= segs;
-		base += segs;
 	}
 }
 
@@ -3327,7 +3319,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 {
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
-	unsigned long size, m64map_off, m32map_off, pemap_off, iomap_off = 0;
+	unsigned long size, m64map_off, m32map_off, pemap_off;
+	unsigned long iomap_off = 0, dma32map_off = 0;
 	const __be64 *prop64;
 	const __be32 *prop32;
 	int len;
@@ -3413,6 +3406,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe_num;
 	phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
 
+	/* Calculate how many 32-bit TCE segments we have */
+	phb->ioda.dma32_count = phb->ioda.m32_pci_base /
+				PNV_IODA1_DMA32_SEGSIZE;
+
 	/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
 	size = _ALIGN_UP(phb->ioda.total_pe_num / 8, sizeof(unsigned long));
 	m64map_off = size;
@@ -3422,6 +3419,9 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	if (phb->type == PNV_PHB_IODA1) {
 		iomap_off = size;
 		size += phb->ioda.total_pe_num * sizeof(phb->ioda.io_segmap[0]);
+		dma32map_off = size;
+		size += phb->ioda.dma32_count *
+			sizeof(phb->ioda.dma32_segmap[0]);
 	}
 	pemap_off = size;
 	size += phb->ioda.total_pe_num * sizeof(struct pnv_ioda_pe);
@@ -3437,6 +3437,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		phb->ioda.io_segmap = aux + iomap_off;
 		for (segno = 0; segno < phb->ioda.total_pe_num; segno++)
 			phb->ioda.io_segmap[segno] = IODA_INVALID_PE;
+
+		phb->ioda.dma32_segmap = aux + dma32map_off;
+		for (segno = 0; segno < phb->ioda.dma32_count; segno++)
+			phb->ioda.dma32_segmap[segno] = IODA_INVALID_PE;
 	}
 	phb->ioda.pe_array = aux + pemap_off;
 	set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc);
@@ -3445,7 +3449,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	mutex_init(&phb->ioda.pe_list_mutex);
 
 	/* Calculate how many 32-bit TCE segments we have */
-	phb->ioda.tce32_count = phb->ioda.m32_pci_base /
+	phb->ioda.dma32_count = phb->ioda.m32_pci_base /
 				PNV_IODA1_DMA32_SEGSIZE;
 
 #if 0 /* We should really do that ... */
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 117cfcd..14d9391 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -142,6 +142,10 @@ struct pnv_phb {
 		unsigned int		*m32_segmap;
 		unsigned int		*io_segmap;
 
+		/* DMA32 segment maps - IODA1 only */
+		unsigned int		dma32_count;
+		unsigned int		*dma32_segmap;
+
 		/* IRQ chip */
 		int			irq_chip_init;
 		struct irq_chip		irq_chip;
@@ -158,9 +162,6 @@ struct pnv_phb {
 		 */
 		unsigned char		pe_rmap[0x10000];
 
-		/* 32-bit TCE tables allocation */
-		unsigned long		tce32_count;
-
 		/* TCE cache invalidate registers (physical and
 		 * remapped)
 		 */
-- 
2.1.0