From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH V2 01/16] mm/hugetlb: Simplify hugetlb unmap
Date: Wed, 8 Jun 2016 20:13:08 +0530 [thread overview]
Message-ID: <1465397003-26812-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1465397003-26812-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>
For hugetlb like THP (and unlike regular page), we do tlb flush after
dropping ptl. Because of the above, we don't need to track force_flush
like we do now. Instead we can simply call tlb_remove_page() which
will do the flush if needed.
No functionality change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
mm/hugetlb.c | 54 +++++++++++++++++++++---------------------------------
1 file changed, 21 insertions(+), 33 deletions(-)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d26162e81fea..741429d01668 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3138,7 +3138,6 @@ void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
unsigned long start, unsigned long end,
struct page *ref_page)
{
- int force_flush = 0;
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
pte_t *ptep;
@@ -3157,19 +3156,22 @@ void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
tlb_start_vma(tlb, vma);
mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
address = start;
-again:
for (; address < end; address += sz) {
ptep = huge_pte_offset(mm, address);
if (!ptep)
continue;
ptl = huge_pte_lock(h, mm, ptep);
- if (huge_pmd_unshare(mm, &address, ptep))
- goto unlock;
+ if (huge_pmd_unshare(mm, &address, ptep)) {
+ spin_unlock(ptl);
+ continue;
+ }
pte = huge_ptep_get(ptep);
- if (huge_pte_none(pte))
- goto unlock;
+ if (huge_pte_none(pte)) {
+ spin_unlock(ptl);
+ continue;
+ }
/*
* Migrating hugepage or HWPoisoned hugepage is already
@@ -3177,7 +3179,8 @@ again:
*/
if (unlikely(!pte_present(pte))) {
huge_pte_clear(mm, address, ptep);
- goto unlock;
+ spin_unlock(ptl);
+ continue;
}
page = pte_page(pte);
@@ -3187,9 +3190,10 @@ again:
* are about to unmap is the actual page of interest.
*/
if (ref_page) {
- if (page != ref_page)
- goto unlock;
-
+ if (page != ref_page) {
+ spin_unlock(ptl);
+ continue;
+ }
/*
* Mark the VMA as having unmapped its page so that
* future faults in this VMA will fail rather than
@@ -3205,30 +3209,14 @@ again:
hugetlb_count_sub(pages_per_huge_page(h), mm);
page_remove_rmap(page, true);
- force_flush = !__tlb_remove_page(tlb, page);
- if (force_flush) {
- address += sz;
- spin_unlock(ptl);
- break;
- }
- /* Bail out after unmapping reference page if supplied */
- if (ref_page) {
- spin_unlock(ptl);
- break;
- }
-unlock:
+
spin_unlock(ptl);
- }
- /*
- * mmu_gather ran out of room to batch pages, we break out of
- * the PTE lock to avoid doing the potential expensive TLB invalidate
- * and page-free while holding it.
- */
- if (force_flush) {
- force_flush = 0;
- tlb_flush_mmu(tlb);
- if (address < end && !ref_page)
- goto again;
+ tlb_remove_page(tlb, page);
+ /*
+ * Bail out after unmapping reference page if supplied
+ */
+ if (ref_page)
+ break;
}
mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
tlb_end_vma(tlb, vma);
--
2.7.4
next prev parent reply other threads:[~2016-06-08 14:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 14:43 [PATCH V2 00/16] TLB flush improvments and Segment table support Aneesh Kumar K.V
2016-06-08 14:43 ` Aneesh Kumar K.V [this message]
2016-06-08 14:43 ` [PATCH V2 02/16] mm: Change the interface for __tlb_remove_page Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 03/16] mm/mmu_gather: Track page size with mmu gather and force flush if page size change Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 04/16] powerpc/mm/radix: Implement tlb mmu gather flush efficiently Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 05/16] powerpc/mm: Make MMU_FTR_RADIX a MMU family feature Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 06/16] powerpc/mm/hash: Add helper for finding SLBE LLP encoding Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 07/16] powerpc/mm: Use hugetlb flush functions Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 08/16] powerpc/mm: Drop multiple definition of mm_is_core_local Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 09/16] powerpc/mm/radix: Add tlb flush of THP ptes Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 10/16] powerpc/mm/radix: Rename function and drop unused arg Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 11/16] powerpc/mm/radix/hugetlb: Add helper for finding page size from hstate Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 12/16] powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 13/16] powerpc/mm: remove flush_tlb_page_nohash Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 14/16] powerpc/mm: Cleanup LPCR defines Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 15/16] powerpc/mm: Switch user slb fault handling to translation enabled Aneesh Kumar K.V
2016-06-08 14:43 ` [PATCH V2 16/16] powerpc/mm: Support segment table for Power9 Aneesh Kumar K.V
2016-06-08 15:07 ` Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465397003-26812-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).