linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 12/38] powerpc: Move FW feature probing out of pseries probe()
Date: Mon, 27 Jun 2016 21:29:10 +1000	[thread overview]
Message-ID: <1467026976-7974-13-git-send-email-benh@kernel.crashing.org> (raw)
In-Reply-To: <1467026976-7974-1-git-send-email-benh@kernel.crashing.org>

We move the function itself to pseries/firmware.c and call it along
with almost all other flat device-tree parsers from early_init_devtree()

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/firmware.h       |  4 +++
 arch/powerpc/kernel/prom.c                |  6 +++++
 arch/powerpc/platforms/pseries/firmware.c | 44 +++++++++++++++++++++++++++++--
 arch/powerpc/platforms/pseries/pseries.h  |  5 ----
 arch/powerpc/platforms/pseries/setup.c    | 41 ----------------------------
 5 files changed, 52 insertions(+), 48 deletions(-)

diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index b062924..ae0d457 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -126,6 +126,10 @@ extern int fwnmi_active;
 
 extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
 
+int pseries_probe_fw_features(unsigned long node,
+			      const char *uname, int depth,
+			      void *data);
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 48434be..d10e786 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -57,6 +57,7 @@
 #include <asm/fadump.h>
 #include <asm/debug.h>
 #include <asm/epapr_hcalls.h>
+#include <asm/firmware.h>
 
 #include <mm/mmu_decl.h>
 
@@ -740,8 +741,13 @@ void __init early_init_devtree(void *params)
 	/* Scan and build the list of machine check recoverable ranges */
 	of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
 #endif
+
 	epapr_paravirt_early_init();
 
+#ifdef CONFIG_PPC_PSERIES
+	/* Now try to figure out if we are running on LPAR */
+	of_scan_flat_dt(pseries_probe_fw_features, NULL);
+#endif
 	DBG(" <- early_init_devtree()\n");
 }
 
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 8c80588..d9a7f62 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -69,7 +69,8 @@ hypertas_fw_features_table[] = {
  * device-tree/ibm,hypertas-functions.  Ultimately this functionality may
  * be moved into prom.c prom_init().
  */
-void __init fw_hypertas_feature_init(const char *hypertas, unsigned long len)
+static void __init fw_hypertas_feature_init(const char *hypertas,
+					    unsigned long len)
 {
 	const char *s;
 	int i;
@@ -113,7 +114,7 @@ vec5_fw_features_table[] = {
 	{FW_FEATURE_PRRN,		OV5_PRRN},
 };
 
-void __init fw_vec5_feature_init(const char *vec5, unsigned long len)
+static void __init fw_vec5_feature_init(const char *vec5, unsigned long len)
 {
 	unsigned int index, feat;
 	int i;
@@ -131,3 +132,42 @@ void __init fw_vec5_feature_init(const char *vec5, unsigned long len)
 
 	pr_debug(" <- fw_vec5_feature_init()\n");
 }
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+
+int __init pseries_probe_fw_features(unsigned long node,
+				     const char *uname, int depth,
+				     void *data)
+{
+	const char *prop;
+	int len;
+	static int hypertas_found;
+	static int vec5_found;
+
+	if (depth != 1)
+		return 0;
+
+	if (!strcmp(uname, "rtas") || !strcmp(uname, "rtas@0")) {
+		prop = of_get_flat_dt_prop(node, "ibm,hypertas-functions",
+					   &len);
+		if (prop) {
+			powerpc_firmware_features |= FW_FEATURE_LPAR;
+			fw_hypertas_feature_init(prop, len);
+		}
+
+		hypertas_found = 1;
+	}
+
+	if (!strcmp(uname, "chosen")) {
+		prop = of_get_flat_dt_prop(node, "ibm,architecture-vec-5",
+					   &len);
+		if (prop)
+			fw_vec5_feature_init(prop, len);
+
+		vec5_found = 1;
+	}
+
+	return hypertas_found && vec5_found;
+}
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 7aa83f0..58a89f9 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -20,11 +20,6 @@ extern void request_event_sources_irqs(struct device_node *np,
 
 #include <linux/of.h>
 
-extern void __init fw_hypertas_feature_init(const char *hypertas,
-					    unsigned long len);
-extern void __init fw_vec5_feature_init(const char *hypertas,
-					unsigned long len);
-
 struct pt_regs;
 
 extern int pSeries_system_reset_exception(struct pt_regs *regs);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 9883bc7..f1fe7aa 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -732,45 +732,6 @@ static void pseries_power_off(void)
 	for (;;);
 }
 
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-
-static int __init pseries_probe_fw_features(unsigned long node,
-					    const char *uname, int depth,
-					    void *data)
-{
-	const char *prop;
-	int len;
-	static int hypertas_found;
-	static int vec5_found;
-
-	if (depth != 1)
-		return 0;
-
-	if (!strcmp(uname, "rtas") || !strcmp(uname, "rtas@0")) {
-		prop = of_get_flat_dt_prop(node, "ibm,hypertas-functions",
-					   &len);
-		if (prop) {
-			powerpc_firmware_features |= FW_FEATURE_LPAR;
-			fw_hypertas_feature_init(prop, len);
-		}
-
-		hypertas_found = 1;
-	}
-
-	if (!strcmp(uname, "chosen")) {
-		prop = of_get_flat_dt_prop(node, "ibm,architecture-vec-5",
-					   &len);
-		if (prop)
-			fw_vec5_feature_init(prop, len);
-
-		vec5_found = 1;
-	}
-
-	return hypertas_found && vec5_found;
-}
-
 static int __init pSeries_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -790,8 +751,6 @@ static int __init pSeries_probe(void)
 
 	pr_debug("pSeries detected, looking for LPAR capability...\n");
 
-	/* Now try to figure out if we are running on LPAR */
-	of_scan_flat_dt(pseries_probe_fw_features, NULL);
 
 #ifdef __LITTLE_ENDIAN__
 	if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
-- 
2.7.4

  parent reply	other threads:[~2016-06-27 11:30 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-27 11:28 [PATCH 00/38] Reorganize setup code and merge 32 and 64-bit setup_arch() Benjamin Herrenschmidt
2016-06-27 11:28 ` [PATCH 01/38] dt: Add of_device_compatible_match() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 02/38] drm: Fix broken use of _PAGE_NO_CACHE on powerpc Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 03/38] powerpc/prom_init: PTRRELOC is not needed Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 04/38] powerpc: Make PTRRELOC() 32-bit only Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 05/38] powerpc: Factor do_feature_fixup calls Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 06/38] powerpc: Move 64-bit feature fixup earlier Benjamin Herrenschmidt
2016-06-28 11:05   ` Aneesh Kumar K.V
2016-06-28 11:14     ` Benjamin Herrenschmidt
2016-06-28 11:49       ` Aneesh Kumar K.V
2016-06-28 11:57         ` Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 07/38] powerpc: Move 64-bit memory reserves to setup_arch() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 08/38] powerpc: Move epapr_paravirt_early_init() to early_init_devtree() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 09/38] powerpc: Update obsolete comments in setup_32.c about entry conditions Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 10/38] powerpc: Add comment explaining the purpose of setup_kdump_trampoline() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 11/38] powerpc/dart: Use a cachable DART Benjamin Herrenschmidt
2016-06-27 11:29 ` Benjamin Herrenschmidt [this message]
2016-06-27 11:29 ` [PATCH 13/38] powerpc: Put exception configuration in a common place Benjamin Herrenschmidt
2016-06-29  6:45   ` [PATCH v2 " Benjamin Herrenschmidt
2016-11-11 10:06   ` [PATCH " Anton Blanchard
2016-11-11 11:04     ` Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 14/38] powerpc/pmac: Remove early allocation of the SMU command buffer Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 15/38] powerpc/64: Move MMU backend selection out of platform code Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 16/38] powerpc/pasemi: Remove IOBMAP allocation from platform probe() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 17/38] powerpc/mm/hash: Don't use machine_is() early during boot Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 18/38] powerpc/rtas: Don't test for machine type in rtas_initialize() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 19/38] powerpc: Don't test for machine type in smp_setup_cpu_maps() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 20/38] powerpc/mm/hash64: Don't test for machine type to detect HEA special case Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 21/38] powerpc/pmac: Remove spurrious machine type test Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 22/38] powerpc/mm: Move hash table ops to a separate structure Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 23/38] powerpc: Ensure that ppc_md is empty before probing for machine type Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 24/38] powerpc: Move 64-bit probe_machine() to later in the boot process Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 25/38] powerpc/cell: Don't use flat device-tree after boot Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 26/38] powerpc/85xx/ge_imp3a: Don't use the " Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 27/38] powerpc/85xx/mpc85xx_ds: " Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 28/38] powerpc/85xx/mpc85xx_rdb: " Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 29/38] powerpc: Move 32-bit probe() machine to later in the boot process Benjamin Herrenschmidt
2016-06-27 20:42   ` Gerhard Pircher
2016-06-27 21:40     ` Benjamin Herrenschmidt
2016-06-28 11:42       ` Gerhard Pircher
2016-06-28 12:01         ` Benjamin Herrenschmidt
2016-06-28 13:25           ` Gerhard Pircher
2016-06-28 22:05             ` Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 30/38] powerpc: Get rid of ppc_md.init_early() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 31/38] powerpc/64: Move the boot time info banner to a separate function Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 32/38] powerpc/64: Move setting of {i, d}cache_bsize to initialize_cache_info() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 33/38] powerpc/64: Move the content of setup_system() to setup_arch() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 34/38] powerpc/32: Move cache info inits to a separate function Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 35/38] powerpc: Re-order the call to smp_setup_cpu_maps() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 36/38] powerpc: Re-order setup_panic() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 37/38] powerpc/64: Make a few boot functions __init Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 38/38] powerpc: Merge 32-bit and 64-bit setup_arch() Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467026976-7974-13-git-send-email-benh@kernel.crashing.org \
    --to=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).