linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 16/38] powerpc/pasemi: Remove IOBMAP allocation from platform probe()
Date: Mon, 27 Jun 2016 21:29:14 +1000	[thread overview]
Message-ID: <1467026976-7974-17-git-send-email-benh@kernel.crashing.org> (raw)
In-Reply-To: <1467026976-7974-1-git-send-email-benh@kernel.crashing.org>

These days, memblocks is available later, so we can just allocate it
as part of iob_init.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pasemi/iommu.c  | 15 +++++----------
 arch/powerpc/platforms/pasemi/pasemi.h |  1 -
 arch/powerpc/platforms/pasemi/setup.c  |  2 --
 3 files changed, 5 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index c929644..43dd3fb 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -202,6 +202,11 @@ int __init iob_init(struct device_node *dn)
 
 	pr_debug(" -> %s\n", __func__);
 
+	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
+	iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+
+	printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
+
 	/* Allocate a spare page to map all invalid IOTLB pages. */
 	tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
 	if (!tmp)
@@ -260,13 +265,3 @@ void __init iommu_init_early_pasemi(void)
 	set_pci_dma_ops(&dma_iommu_ops);
 }
 
-void __init alloc_iobmap_l2(void)
-{
-#ifndef CONFIG_PPC_PASEMI_IOMMU
-	return;
-#endif
-	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
-	iob_l2_base = (u32 *)__va(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
-
-	printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
-}
diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h
index 11f230a..74cbcb3 100644
--- a/arch/powerpc/platforms/pasemi/pasemi.h
+++ b/arch/powerpc/platforms/pasemi/pasemi.h
@@ -8,7 +8,6 @@ extern void pas_pci_dma_dev_setup(struct pci_dev *dev);
 
 extern void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset);
 
-extern void __init alloc_iobmap_l2(void);
 extern void __init pasemi_map_registers(void);
 
 /* Power savings modes, implemented in asm */
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 7605bc6..9a881be 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -426,8 +426,6 @@ static int __init pas_probe(void)
 	    !of_flat_dt_is_compatible(root, "pasemi,pwrficient"))
 		return 0;
 
-	alloc_iobmap_l2();
-
 	return 1;
 }
 
-- 
2.7.4

  parent reply	other threads:[~2016-06-27 11:30 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-27 11:28 [PATCH 00/38] Reorganize setup code and merge 32 and 64-bit setup_arch() Benjamin Herrenschmidt
2016-06-27 11:28 ` [PATCH 01/38] dt: Add of_device_compatible_match() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 02/38] drm: Fix broken use of _PAGE_NO_CACHE on powerpc Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 03/38] powerpc/prom_init: PTRRELOC is not needed Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 04/38] powerpc: Make PTRRELOC() 32-bit only Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 05/38] powerpc: Factor do_feature_fixup calls Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 06/38] powerpc: Move 64-bit feature fixup earlier Benjamin Herrenschmidt
2016-06-28 11:05   ` Aneesh Kumar K.V
2016-06-28 11:14     ` Benjamin Herrenschmidt
2016-06-28 11:49       ` Aneesh Kumar K.V
2016-06-28 11:57         ` Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 07/38] powerpc: Move 64-bit memory reserves to setup_arch() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 08/38] powerpc: Move epapr_paravirt_early_init() to early_init_devtree() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 09/38] powerpc: Update obsolete comments in setup_32.c about entry conditions Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 10/38] powerpc: Add comment explaining the purpose of setup_kdump_trampoline() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 11/38] powerpc/dart: Use a cachable DART Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 12/38] powerpc: Move FW feature probing out of pseries probe() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 13/38] powerpc: Put exception configuration in a common place Benjamin Herrenschmidt
2016-06-29  6:45   ` [PATCH v2 " Benjamin Herrenschmidt
2016-11-11 10:06   ` [PATCH " Anton Blanchard
2016-11-11 11:04     ` Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 14/38] powerpc/pmac: Remove early allocation of the SMU command buffer Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 15/38] powerpc/64: Move MMU backend selection out of platform code Benjamin Herrenschmidt
2016-06-27 11:29 ` Benjamin Herrenschmidt [this message]
2016-06-27 11:29 ` [PATCH 17/38] powerpc/mm/hash: Don't use machine_is() early during boot Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 18/38] powerpc/rtas: Don't test for machine type in rtas_initialize() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 19/38] powerpc: Don't test for machine type in smp_setup_cpu_maps() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 20/38] powerpc/mm/hash64: Don't test for machine type to detect HEA special case Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 21/38] powerpc/pmac: Remove spurrious machine type test Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 22/38] powerpc/mm: Move hash table ops to a separate structure Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 23/38] powerpc: Ensure that ppc_md is empty before probing for machine type Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 24/38] powerpc: Move 64-bit probe_machine() to later in the boot process Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 25/38] powerpc/cell: Don't use flat device-tree after boot Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 26/38] powerpc/85xx/ge_imp3a: Don't use the " Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 27/38] powerpc/85xx/mpc85xx_ds: " Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 28/38] powerpc/85xx/mpc85xx_rdb: " Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 29/38] powerpc: Move 32-bit probe() machine to later in the boot process Benjamin Herrenschmidt
2016-06-27 20:42   ` Gerhard Pircher
2016-06-27 21:40     ` Benjamin Herrenschmidt
2016-06-28 11:42       ` Gerhard Pircher
2016-06-28 12:01         ` Benjamin Herrenschmidt
2016-06-28 13:25           ` Gerhard Pircher
2016-06-28 22:05             ` Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 30/38] powerpc: Get rid of ppc_md.init_early() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 31/38] powerpc/64: Move the boot time info banner to a separate function Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 32/38] powerpc/64: Move setting of {i, d}cache_bsize to initialize_cache_info() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 33/38] powerpc/64: Move the content of setup_system() to setup_arch() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 34/38] powerpc/32: Move cache info inits to a separate function Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 35/38] powerpc: Re-order the call to smp_setup_cpu_maps() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 36/38] powerpc: Re-order setup_panic() Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 37/38] powerpc/64: Make a few boot functions __init Benjamin Herrenschmidt
2016-06-27 11:29 ` [PATCH 38/38] powerpc: Merge 32-bit and 64-bit setup_arch() Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467026976-7974-17-git-send-email-benh@kernel.crashing.org \
    --to=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).