From: "Ian Munsie" <imunsie@au1.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
Michael Neuling <mikey@neuling.org>,
Frederic Barrat <fbarrat@linux.vnet.ibm.com>,
Andrew Donnellan <andrew.donnellan@au1.ibm.com>,
linuxppc-dev@lists.ozlabs.org, Huy Nguyen <huyn@mellanox.com>
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>,
linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH 12/14] PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
Date: Mon, 4 Jul 2016 23:22:10 +1000 [thread overview]
Message-ID: <1467638532-9250-13-git-send-email-imunsie@au.ibm.com> (raw)
In-Reply-To: <1467638532-9250-1-git-send-email-imunsie@au.ibm.com>
From: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
The cxl driver will use infrastructure from pnv_php to handle device tree
updates when switching bi-modal CAPI cards into CAPI mode.
To enable this, export pnv_php_find_slot() and
pnv_php_set_slot_power_state(), and add corresponding declarations, as well
as the definition of struct pnv_php_slot, to asm/pnv-pci.h.
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/pnv-pci.h | 28 ++++++++++++++++++++++++++++
drivers/pci/hotplug/Kconfig | 1 +
drivers/pci/hotplug/pnv_php.c | 32 +++++---------------------------
3 files changed, 34 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index c47097f..0cbd813 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -11,6 +11,7 @@
#define _ASM_PNV_PCI_H
#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
#include <misc/cxl-base.h>
#include <asm/opal-api.h>
@@ -47,4 +48,31 @@ void pnv_cxl_phb_set_peer_afu(struct pci_dev *dev, struct cxl_afu *afu);
#endif
+struct pnv_php_slot {
+ struct hotplug_slot slot;
+ struct hotplug_slot_info slot_info;
+ uint64_t id;
+ char *name;
+ int slot_no;
+ struct kref kref;
+#define PNV_PHP_STATE_INITIALIZED 0
+#define PNV_PHP_STATE_REGISTERED 1
+#define PNV_PHP_STATE_POPULATED 2
+#define PNV_PHP_STATE_OFFLINE 3
+ int state;
+ struct device_node *dn;
+ struct pci_dev *pdev;
+ struct pci_bus *bus;
+ bool power_state_check;
+ void *fdt;
+ void *dt;
+ struct of_changeset ocs;
+ struct pnv_php_slot *parent;
+ struct list_head children;
+ struct list_head link;
+};
+extern struct pnv_php_slot *pnv_php_find_slot(struct device_node *dn);
+extern int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
+ uint8_t state);
+
#endif
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index aadce45..b719a72 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -117,6 +117,7 @@ config HOTPLUG_PCI_POWERNV
tristate "PowerPC PowerNV PCI Hotplug driver"
depends on PPC_POWERNV && EEH
select OF_DYNAMIC
+ select HOTPLUG_PCI_POWERNV_BASE
help
Say Y here if you run PowerPC PowerNV platform that supports
PCI Hotplug
diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index 6086db6..2d2f704 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -22,30 +22,6 @@
#define DRIVER_AUTHOR "Gavin Shan, IBM Corporation"
#define DRIVER_DESC "PowerPC PowerNV PCI Hotplug Driver"
-struct pnv_php_slot {
- struct hotplug_slot slot;
- struct hotplug_slot_info slot_info;
- uint64_t id;
- char *name;
- int slot_no;
- struct kref kref;
-#define PNV_PHP_STATE_INITIALIZED 0
-#define PNV_PHP_STATE_REGISTERED 1
-#define PNV_PHP_STATE_POPULATED 2
-#define PNV_PHP_STATE_OFFLINE 3
- int state;
- struct device_node *dn;
- struct pci_dev *pdev;
- struct pci_bus *bus;
- bool power_state_check;
- void *fdt;
- void *dt;
- struct of_changeset ocs;
- struct pnv_php_slot *parent;
- struct list_head children;
- struct list_head link;
-};
-
static LIST_HEAD(pnv_php_slot_list);
static DEFINE_SPINLOCK(pnv_php_lock);
@@ -91,7 +67,7 @@ static struct pnv_php_slot *pnv_php_match(struct device_node *dn,
return NULL;
}
-static struct pnv_php_slot *pnv_php_find_slot(struct device_node *dn)
+struct pnv_php_slot *pnv_php_find_slot(struct device_node *dn)
{
struct pnv_php_slot *php_slot, *tmp;
unsigned long flags;
@@ -108,6 +84,7 @@ static struct pnv_php_slot *pnv_php_find_slot(struct device_node *dn)
return NULL;
}
+EXPORT_SYMBOL_GPL(pnv_php_find_slot);
/*
* Remove pdn for all children of the indicated device node.
@@ -316,8 +293,8 @@ out:
return ret;
}
-static int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
- uint8_t state)
+int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
+ uint8_t state)
{
struct pnv_php_slot *php_slot = slot->private;
struct opal_msg msg;
@@ -347,6 +324,7 @@ static int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
return ret;
}
+EXPORT_SYMBOL_GPL(pnv_php_set_slot_power_state);
static int pnv_php_get_power_state(struct hotplug_slot *slot, u8 *state)
{
--
2.8.1
next prev parent reply other threads:[~2016-07-04 13:23 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-04 13:21 powerpc / cxl: Add support for the Mellanox CX4 in cxl mode Ian Munsie
2016-07-04 13:21 ` [PATCH 01/14] powerpc/powernv: Split cxl code out into a separate file Ian Munsie
2016-07-06 3:44 ` Andrew Donnellan
2016-07-06 16:27 ` Frederic Barrat
2016-07-04 13:22 ` [PATCH 02/14] cxl: Add cxl_slot_is_supported API Ian Munsie
2016-07-06 2:02 ` Andrew Donnellan
2016-07-06 16:36 ` Frederic Barrat
2016-07-04 13:22 ` [PATCH 03/14] cxl: Enable bus mastering for devices using CAPP DMA mode Ian Munsie
2016-07-06 4:04 ` Andrew Donnellan
2016-07-06 16:37 ` Frederic Barrat
2016-07-04 13:22 ` [PATCH 04/14] cxl: Move cxl_afu_get / cxl_afu_put to base Ian Munsie
2016-07-05 2:10 ` Andrew Donnellan
2016-07-06 16:45 ` Frederic Barrat
2016-07-04 13:22 ` [PATCH 05/14] cxl: Allow a default context to be associated with an external pci_dev Ian Munsie
2016-07-06 16:51 ` Frederic Barrat
2016-07-04 13:22 ` [PATCH 06/14] powerpc/powernv: Add support for the cxl kernel api on the real phb Ian Munsie
2016-07-06 17:38 ` Frederic Barrat
2016-07-07 6:28 ` Ian Munsie
2016-07-04 13:22 ` [PATCH 07/14] cxl: Add support for using the kernel API with a real PHB Ian Munsie
2016-07-06 17:39 ` Frederic Barrat
2016-07-06 18:30 ` Frederic Barrat
2016-07-07 6:32 ` Ian Munsie
2016-07-04 13:22 ` [PATCH 08/14] cxl: Add kernel APIs to get & set the max irqs per context Ian Munsie
2016-07-06 18:11 ` Frederic Barrat
2016-07-07 6:00 ` Ian Munsie
2016-07-04 13:22 ` [PATCH 09/14] cxl: Add preliminary workaround for CX4 interrupt limitation Ian Munsie
2016-07-06 18:34 ` Frederic Barrat
2016-07-04 13:22 ` [PATCH 10/14] cxl: Add support for interrupts on the Mellanox CX4 Ian Munsie
2016-07-06 18:41 ` Frederic Barrat
2016-07-07 6:03 ` Ian Munsie
2016-07-04 13:22 ` [PATCH 11/14] cxl: Workaround PE=0 hardware limitation in " Ian Munsie
2016-07-06 4:42 ` Andrew Donnellan
2016-07-06 18:42 ` Frederic Barrat
2016-07-04 13:22 ` Ian Munsie [this message]
2016-07-05 0:03 ` [PATCH 12/14] PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl Gavin Shan
2016-07-05 1:08 ` Andrew Donnellan
2016-07-04 13:22 ` [PATCH 13/14] PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state Ian Munsie
2016-07-04 13:22 ` [PATCH 14/14] cxl: Add cxl_check_and_switch_mode() API to switch bi-modal cards Ian Munsie
2016-07-06 3:55 ` Andrew Donnellan
2016-07-06 18:51 ` Frederic Barrat
2016-07-07 1:18 ` Andrew Donnellan
2016-07-07 6:26 ` Ian Munsie
2016-07-07 6:44 ` Andrew Donnellan
2016-07-07 8:15 ` Andrew Donnellan
2016-07-11 9:19 ` Ian Munsie
2016-07-12 1:20 ` Andrew Donnellan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467638532-9250-13-git-send-email-imunsie@au.ibm.com \
--to=imunsie@au1.ibm.com \
--cc=andrew.donnellan@au1.ibm.com \
--cc=bhelgaas@google.com \
--cc=fbarrat@linux.vnet.ibm.com \
--cc=gwshan@linux.vnet.ibm.com \
--cc=huyn@mellanox.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).