linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Subject: [PATCH for-4.8 01/13] mm/hugetlb: Simplify hugetlb unmap
Date: Wed, 13 Jul 2016 15:06:32 +0530	[thread overview]
Message-ID: <1468402604-5130-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com> (raw)
In-Reply-To: <1468402604-5130-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com>

For hugetlb like THP (and unlike regular page), we do tlb flush after
dropping ptl. Because of the above, we don't need to track force_flush
like we do now. Instead we can simply call tlb_remove_page() which
will do the flush if needed.

No functionality change in this patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
NOTE: This patch is already applied to -mm tree

 mm/hugetlb.c | 54 +++++++++++++++++++++---------------------------------
 1 file changed, 21 insertions(+), 33 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index c1f3c0be150a..0352296502b1 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3177,7 +3177,6 @@ void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
 			    unsigned long start, unsigned long end,
 			    struct page *ref_page)
 {
-	int force_flush = 0;
 	struct mm_struct *mm = vma->vm_mm;
 	unsigned long address;
 	pte_t *ptep;
@@ -3196,19 +3195,22 @@ void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
 	tlb_start_vma(tlb, vma);
 	mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
 	address = start;
-again:
 	for (; address < end; address += sz) {
 		ptep = huge_pte_offset(mm, address);
 		if (!ptep)
 			continue;
 
 		ptl = huge_pte_lock(h, mm, ptep);
-		if (huge_pmd_unshare(mm, &address, ptep))
-			goto unlock;
+		if (huge_pmd_unshare(mm, &address, ptep)) {
+			spin_unlock(ptl);
+			continue;
+		}
 
 		pte = huge_ptep_get(ptep);
-		if (huge_pte_none(pte))
-			goto unlock;
+		if (huge_pte_none(pte)) {
+			spin_unlock(ptl);
+			continue;
+		}
 
 		/*
 		 * Migrating hugepage or HWPoisoned hugepage is already
@@ -3216,7 +3218,8 @@ again:
 		 */
 		if (unlikely(!pte_present(pte))) {
 			huge_pte_clear(mm, address, ptep);
-			goto unlock;
+			spin_unlock(ptl);
+			continue;
 		}
 
 		page = pte_page(pte);
@@ -3226,9 +3229,10 @@ again:
 		 * are about to unmap is the actual page of interest.
 		 */
 		if (ref_page) {
-			if (page != ref_page)
-				goto unlock;
-
+			if (page != ref_page) {
+				spin_unlock(ptl);
+				continue;
+			}
 			/*
 			 * Mark the VMA as having unmapped its page so that
 			 * future faults in this VMA will fail rather than
@@ -3244,30 +3248,14 @@ again:
 
 		hugetlb_count_sub(pages_per_huge_page(h), mm);
 		page_remove_rmap(page, true);
-		force_flush = !__tlb_remove_page(tlb, page);
-		if (force_flush) {
-			address += sz;
-			spin_unlock(ptl);
-			break;
-		}
-		/* Bail out after unmapping reference page if supplied */
-		if (ref_page) {
-			spin_unlock(ptl);
-			break;
-		}
-unlock:
+
 		spin_unlock(ptl);
-	}
-	/*
-	 * mmu_gather ran out of room to batch pages, we break out of
-	 * the PTE lock to avoid doing the potential expensive TLB invalidate
-	 * and page-free while holding it.
-	 */
-	if (force_flush) {
-		force_flush = 0;
-		tlb_flush_mmu(tlb);
-		if (address < end && !ref_page)
-			goto again;
+		tlb_remove_page(tlb, page);
+		/*
+		 * Bail out after unmapping reference page if supplied
+		 */
+		if (ref_page)
+			break;
 	}
 	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
 	tlb_end_vma(tlb, vma);
-- 
2.7.4

  reply	other threads:[~2016-07-13  9:37 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-13  9:36 [PATCH for-4.8_set2 00/13] TLB flush changes Aneesh Kumar K.V
2016-07-13  9:36 ` Aneesh Kumar K.V [this message]
2016-07-13  9:36 ` [PATCH for-4.8 02/13] mm: Change the interface for __tlb_remove_page Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 03/13] mm/mmu_gather: Track page size with mmu gather and force flush if page size change Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 04/13] powerpc/mm/radix: Implement tlb mmu gather flush efficiently Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 05/13] powerpc/mm: Make MMU_FTR_RADIX a MMU family feature Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 06/13] powerpc/mm/hash: Add helper for finding SLBE LLP encoding Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 07/13] powerpc/mm: Use hugetlb flush functions Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 08/13] powerpc/mm: Drop multiple definition of mm_is_core_local Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 09/13] powerpc/mm/radix: Add tlb flush of THP ptes Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 10/13] powerpc/mm/radix: Rename function and drop unused arg Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 11/13] powerpc/mm/radix/hugetlb: Add helper for finding page size from hstate Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 12/13] powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range Aneesh Kumar K.V
2016-07-13  9:36 ` [PATCH for-4.8 13/13] powerpc/mm: remove flush_tlb_page_nohash Aneesh Kumar K.V

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468402604-5130-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com \
    --to=aneesh.kumar@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).