[PATCH 12/14] powerpc/pseries: remove unused exception code, small cleanups

[Nicholas Piggin <nicholas.piggin@gmail.com>]

This was not done before the big patches because I only noticed
them afterwards. It has become much easier to see which handlers
are branched to from which exception vectors now, and to see
exactly what vector space is being used for what.

Signed-off-by: Nick Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/exceptions-64s.S | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9832765..b7a8a66 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -90,6 +90,9 @@ USE_FIXED_SECTION(real_vectors)
 	.globl __start_interrupts
 __start_interrupts:
 
+/* No virt vectors corresponding with 0x0..0x100 */
+VECTOR_HANDLER_VIRT_NONE(0x4000, 0x4100)
+
 VECTOR_HANDLER_REAL_BEGIN(system_reset, 0x100, 0x200)
 	SET_SCRATCH0(r13)
 #ifdef CONFIG_PPC_P7_NAP
@@ -891,9 +894,7 @@ TRAMP_KVM(PACA_EXGEN, 0xd00)
 COMMON_HANDLER(single_step_common, 0xd00, single_step_exception)
 
 VECTOR_HANDLER_REAL_OOL_HV(h_data_storage, 0xe00, 0xe20)
-VECTOR_HANDLER_VIRT_BEGIN(unused, 0x4e00, 0x4e20)
-	b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
-VECTOR_HANDLER_VIRT_END(unused, 0x4e00, 0x4e20)
+VECTOR_HANDLER_VIRT_NONE(0x4e00, 0x4e20)
 TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0xe00)
 COMMON_HANDLER_BEGIN(h_data_storage_common)
 	mfspr   r10,SPRN_HDAR
@@ -907,13 +908,10 @@ COMMON_HANDLER_BEGIN(h_data_storage_common)
 	bl      unknown_exception
 	b       ret_from_except
 COMMON_HANDLER_END(h_data_storage_common)
-COMMON_HANDLER(trap_0e_common, 0xe00, unknown_exception)
 
 
 VECTOR_HANDLER_REAL_OOL_HV(h_instr_storage, 0xe20, 0xe40)
-VECTOR_HANDLER_VIRT_BEGIN(unused, 0x4e20, 0x4e40)
-	b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
-VECTOR_HANDLER_VIRT_END(unused, 0x4e20, 0x4e40)
+VECTOR_HANDLER_VIRT_NONE(0x4e20, 0x4e40)
 TRAMP_KVM_HV(PACA_EXGEN, 0xe20)
 COMMON_HANDLER(h_instr_storage_common, 0xe20, unknown_exception)
 
@@ -925,9 +923,7 @@ COMMON_HANDLER(emulation_assist_common, 0xe40, emulation_assist_interrupt)
 
 
 __VECTOR_HANDLER_REAL_OOL_HV_DIRECT(hmi_exception, 0xe60, 0xe80, hmi_exception_early)
-VECTOR_HANDLER_VIRT_BEGIN(unused, 0x4e60, 0x4e80)
-	b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
-VECTOR_HANDLER_VIRT_END(unused, 0x4e60, 0x4e80)
+VECTOR_HANDLER_VIRT_NONE(0x4e60, 0x4e80)
 TRAMP_KVM_HV(PACA_EXGEN, 0xe60)
 COMMON_HANDLER_BEGIN(hmi_exception_early)
 	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0xe60)
@@ -1100,6 +1096,7 @@ COMMON_HANDLER(cbe_system_error_common, 0x1200, cbe_system_error_exception)
 
 #else /* CONFIG_CBE_RAS */
 VECTOR_HANDLER_REAL_NONE(0x1200, 0x1300)
+VECTOR_HANDLER_VIRT_NONE(0x5200, 0x5300)
 #endif
 
 
@@ -1212,6 +1209,7 @@ COMMON_HANDLER(cbe_maintenance, 0x1600, cbe_maintenance_exception)
 
 #else /* CONFIG_CBE_RAS */
 VECTOR_HANDLER_REAL_NONE(0x1600, 0x1700)
+VECTOR_HANDLER_VIRT_NONE(0x5600, 0x5700)
 #endif
 
 
@@ -1233,8 +1231,11 @@ COMMON_HANDLER(cbe_thermal, 0x1800, cbe_thermal_exception)
 
 #else /* CONFIG_CBE_RAS */
 VECTOR_HANDLER_REAL_NONE(0x1800, 0x1900)
+VECTOR_HANDLER_VIRT_NONE(0x5800, 0x5900)
 #endif
 
+VECTOR_HANDLER_REAL_NONE(0x1900, 0x2000)
+VECTOR_HANDLER_VIRT_NONE(0x5900, 0x6000)
 
 /*
  * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
-- 
2.8.1