From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, mpe@ellerman.id.au, anton@samba.org,
paulus@samba.org
Cc: linuxppc-dev@lists.ozlabs.org,
Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Subject: [RFC PATCH 4/9] powerpc: Use set_soft_enabled api to update paca->soft_enabled
Date: Mon, 25 Jul 2016 20:22:17 +0530 [thread overview]
Message-ID: <1469458342-26233-5-git-send-email-maddy@linux.vnet.ibm.com> (raw)
In-Reply-To: <1469458342-26233-1-git-send-email-maddy@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/kvm_ppc.h | 2 +-
arch/powerpc/kernel/irq.c | 4 ++--
arch/powerpc/kernel/setup_64.c | 3 ++-
arch/powerpc/kernel/time.c | 4 ++--
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index e790b8a6bf0b..68c2275c3674 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -707,7 +707,7 @@ static inline void kvmppc_fix_ee_before_entry(void)
/* Only need to enable IRQs by hard enabling them after this */
local_paca->irq_happened = 0;
- local_paca->soft_enabled = LAZY_INTERRUPT_ENABLED;
+ set_soft_enabled(LAZY_INTERRUPT_ENABLED);
#endif
}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 88e541daf7b0..9b9b6df8d83d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -202,7 +202,7 @@ notrace void arch_local_irq_restore(unsigned long en)
/* Write the new soft-enabled value */
set_soft_enabled(en);
- if (en == LAZY_INTERRUPT_DIABLED)
+ if (en == LAZY_INTERRUPT_DISABLED)
return;
/*
* From this point onward, we can take interrupts, preempt,
@@ -331,7 +331,7 @@ bool prep_irq_for_idle(void)
* of entering the low power state.
*/
local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
- local_paca->soft_enabled = LAZY_INTERRUPT_ENABLED;
+ set_soft_enabled(LAZY_INTERRUPT_ENABLED);
/* Tell the caller to enter the low power state */
return true;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 0ca504839550..2c7f4b23359a 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -206,7 +206,7 @@ static void fixup_boot_paca(void)
/* Allow percpu accesses to work until we setup percpu data */
get_paca()->data_offset = 0;
/* Mark interrupts disabled in PACA */
- get_paca()->soft_enabled = LAZY_INTERRUPT_DISABLED;
+ set_soft_enabled(LAZY_INTERRUPT_DISABLED);
}
static void cpu_ready_for_interrupts(void)
@@ -326,6 +326,7 @@ void early_setup_secondary(void)
{
/* Mark interrupts enabled in PACA */
get_paca()->soft_enabled = 0;
+ set_soft_enabled(LAZY_INTERRUPT_DISABLED);
/* Initialize the hash table or TLB handling */
early_init_mmu_secondary();
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index e46f7ab6cbde..0a1669708a0d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -258,7 +258,7 @@ void accumulate_stolen_time(void)
* needs to reflect that so various debug stuff doesn't
* complain
*/
- local_paca->soft_enabled = LAZY_INTERRUPT_DISABLED;
+ set_soft_enabled(LAZY_INTERRUPT_DISABLED);
sst = scan_dispatch_log(local_paca->starttime_user);
ust = scan_dispatch_log(local_paca->starttime);
@@ -266,7 +266,7 @@ void accumulate_stolen_time(void)
local_paca->user_time -= ust;
local_paca->stolen_time += ust + sst;
- local_paca->soft_enabled = save_soft_enabled;
+ set_soft_enabled(save_soft_enabled);
}
static inline u64 calculate_stolen_time(u64 stop_tb)
--
2.7.4
next prev parent reply other threads:[~2016-07-25 14:53 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-25 14:52 [RFC PATCH 0/9]powerpc: "paca->soft_enabled" based local atomic operation implementation Madhavan Srinivasan
2016-07-25 14:52 ` [RFC PATCH 1/9] Add #defs for paca->soft_enabled flags Madhavan Srinivasan
2016-07-26 5:27 ` Nicholas Piggin
2016-07-26 6:05 ` Madhavan Srinivasan
2016-07-26 6:13 ` Nicholas Piggin
2016-07-28 13:54 ` Nicholas Piggin
2016-07-25 14:52 ` [RFC PATCH 2/9] Cleanup to use LAZY_INTERRUPT_* macros for paca->soft_enabled update Madhavan Srinivasan
2016-07-25 14:52 ` [RFC PATCH 3/9] powerpc: move set_soft_enabled() Madhavan Srinivasan
2016-07-25 14:52 ` Madhavan Srinivasan [this message]
2016-07-25 14:52 ` [RFC PATCH 5/9] powerpc: reverse the soft_enable logic Madhavan Srinivasan
2016-07-26 5:31 ` Nicholas Piggin
2016-07-26 6:07 ` Madhavan Srinivasan
2016-07-25 14:52 ` [RFC PATCH 6/9] powerpc: modify __SOFTEN_TEST to support tri-state soft_enabled flag Madhavan Srinivasan
2016-07-26 5:41 ` Nicholas Piggin
2016-07-26 6:12 ` Madhavan Srinivasan
2016-07-25 14:52 ` [RFC PATCH 7/9] powerpc: Add support to mask perf interrupts Madhavan Srinivasan
2016-07-26 5:46 ` Nicholas Piggin
2016-07-26 6:25 ` Madhavan Srinivasan
2016-07-26 6:30 ` Nicholas Piggin
2016-07-26 6:46 ` Madhavan Srinivasan
2016-07-26 7:10 ` Nicholas Piggin
2016-07-26 7:22 ` Madhavan Srinivasan
2016-07-26 7:34 ` Nicholas Piggin
2016-07-25 14:52 ` [RFC PATCH 8/9] powerpc: Support to replay PMIs Madhavan Srinivasan
2016-07-26 5:50 ` Nicholas Piggin
2016-07-26 6:40 ` Madhavan Srinivasan
2016-07-25 14:52 ` [RFC PATCH 9/9] powerpc: rewrite local_t using soft_irq Madhavan Srinivasan
2016-07-26 5:53 ` Nicholas Piggin
2016-07-26 6:41 ` Madhavan Srinivasan
2016-07-26 12:21 ` [RFC PATCH 0/9]powerpc: "paca->soft_enabled" based local atomic operation implementation Benjamin Herrenschmidt
2016-07-26 13:42 ` Madhavan Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469458342-26233-5-git-send-email-maddy@linux.vnet.ibm.com \
--to=maddy@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).