linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, mpe@ellerman.id.au
Cc: anton@samba.org, paulus@samba.org, npiggin@gmail.com,
	linuxppc-dev@lists.ozlabs.org,
	Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Subject: [RFC PATCH v2 04/11] powerpc: Use set_soft_enabled api to update paca->soft_enabled
Date: Mon,  1 Aug 2016 00:36:22 +0530	[thread overview]
Message-ID: <1469991989-28409-5-git-send-email-maddy@linux.vnet.ibm.com> (raw)
In-Reply-To: <1469991989-28409-1-git-send-email-maddy@linux.vnet.ibm.com>

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/kvm_ppc.h | 2 +-
 arch/powerpc/kernel/irq.c          | 2 +-
 arch/powerpc/kernel/setup_64.c     | 4 ++--
 arch/powerpc/kernel/time.c         | 4 ++--
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index fec6d5e92dab..103c5501982d 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -707,7 +707,7 @@ static inline void kvmppc_fix_ee_before_entry(void)
 
 	/* Only need to enable IRQs by hard enabling them after this */
 	local_paca->irq_happened = 0;
-	local_paca->soft_enabled = IRQ_DISABLE_LEVEL_NONE;
+	set_soft_enabled(IRQ_DISABLE_LEVEL_NONE);
 #endif
 }
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1d0e82a6c861..84edd25c8d51 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -331,7 +331,7 @@ bool prep_irq_for_idle(void)
 	 * of entering the low power state.
 	 */
 	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
-	local_paca->soft_enabled = IRQ_DISABLE_LEVEL_NONE;
+	set_soft_enabled(IRQ_DISABLE_LEVEL_NONE);
 
 	/* Tell the caller to enter the low power state */
 	return true;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 8b60b894abeb..389caca3d5d2 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -206,7 +206,7 @@ static void fixup_boot_paca(void)
 	/* Allow percpu accesses to work until we setup percpu data */
 	get_paca()->data_offset = 0;
 	/* Mark interrupts disabled in PACA */
-	get_paca()->soft_enabled = IRQ_DISABLE_LEVEL_LINUX;
+	set_soft_enabled(IRQ_DISABLE_LEVEL_LINUX);
 }
 
 static void cpu_ready_for_interrupts(void)
@@ -325,7 +325,7 @@ void __init early_setup(unsigned long dt_ptr)
 void early_setup_secondary(void)
 {
 	/* Mark interrupts enabled in PACA */
-	get_paca()->soft_enabled = 0;
+	set_soft_enabled(IRQ_DISABLE_LEVEL_LINUX);
 
 	/* Initialize the hash table or TLB handling */
 	early_init_mmu_secondary();
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 6bf2546ac372..42f6ca367b09 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -258,7 +258,7 @@ void accumulate_stolen_time(void)
 	 * needs to reflect that so various debug stuff doesn't
 	 * complain
 	 */
-	local_paca->soft_enabled = IRQ_DISABLE_LEVEL_LINUX;
+	set_soft_enabled(IRQ_DISABLE_LEVEL_LINUX);
 
 	sst = scan_dispatch_log(local_paca->starttime_user);
 	ust = scan_dispatch_log(local_paca->starttime);
@@ -266,7 +266,7 @@ void accumulate_stolen_time(void)
 	local_paca->user_time -= ust;
 	local_paca->stolen_time += ust + sst;
 
-	local_paca->soft_enabled = save_soft_enabled;
+	set_soft_enabled(save_soft_enabled);
 }
 
 static inline u64 calculate_stolen_time(u64 stop_tb)
-- 
2.7.4

  parent reply	other threads:[~2016-07-31 19:06 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-31 19:06 [RFC PATCH v2 00/11] powerpc: "paca->soft_enabled" based local atomic operation implementation Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 01/11] Add #defs for paca->soft_enabled flags Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 02/11] Cleanup to use IRQ_DISABLE_LEVEL_* macros for paca->soft_enabled update Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 03/11] powerpc: move set_soft_enabled() Madhavan Srinivasan
2016-07-31 19:06 ` Madhavan Srinivasan [this message]
2016-07-31 19:06 ` [RFC PATCH v2 05/11] powerpc: reverse the soft_enable logic Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 06/11] powerpc: Avoid using EXCEPTION_PROLOG_1 macro in MASKABLE_* Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 07/11] powerpc: Add new _EXCEPTION_PROLOG_1 macro Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 08/11] powerpc: Add "mask_lvl" paramater to MASKABLE_* macros Madhavan Srinivasan
2016-08-01  5:21   ` Nicholas Piggin
2016-08-01  5:49     ` Madhavan Srinivasan
2016-07-31 19:06 ` [RFC PATCH v2 09/11] powerpc: Add support to mask perf interrupts Madhavan Srinivasan
2016-08-01  5:29   ` Nicholas Piggin
2016-08-01  6:09     ` Madhavan Srinivasan
2016-08-01  6:48       ` Nicholas Piggin
2016-07-31 19:06 ` [RFC PATCH v2 10/11] powerpc: Support to replay PMIs Madhavan Srinivasan
2016-08-01  8:07   ` Nicholas Piggin
2016-08-01  8:51     ` Benjamin Herrenschmidt
2016-08-01 10:22       ` Madhavan Srinivasan
2016-08-01 10:43         ` Nicholas Piggin
2016-08-01  8:52     ` Benjamin Herrenschmidt
2016-07-31 19:06 ` [RFC PATCH v2 11/11] powerpc: rewrite local_t using soft_irq Madhavan Srinivasan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469991989-28409-5-git-send-email-maddy@linux.vnet.ibm.com \
    --to=maddy@linux.vnet.ibm.com \
    --cc=anton@samba.org \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).