From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, mpe@ellerman.id.au
Cc: anton@samba.org, paulus@samba.org, npiggin@gmail.com,
linuxppc-dev@lists.ozlabs.org,
Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Subject: [RFC PATCH v4 08/12] powerpc: Introduce new mask bit for soft_enabled
Date: Mon, 29 Aug 2016 00:07:24 +0530 [thread overview]
Message-ID: <1472409448-18172-9-git-send-email-maddy@linux.vnet.ibm.com> (raw)
In-Reply-To: <1472409448-18172-1-git-send-email-maddy@linux.vnet.ibm.com>
Currently soft_enabled is used as the flag to determine
the interrupt state. Patch extends the soft_enabled
to be used as a mask instead of a flag.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/exception-64s.h | 4 ++--
arch/powerpc/include/asm/hw_irq.h | 1 +
arch/powerpc/include/asm/irqflags.h | 4 ++--
arch/powerpc/kernel/entry_64.S | 4 ++--
arch/powerpc/kernel/exceptions-64e.S | 6 +++---
5 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index dd3253bd0d8e..1eea4ab75607 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -430,9 +430,9 @@ label##_relon_hv: \
#define __SOFTEN_TEST(h, vec) \
lbz r10,PACASOFTIRQEN(r13); \
- cmpwi r10,IRQ_DISABLE_MASK_LINUX; \
+ andi. r10,r10,IRQ_DISABLE_MASK_LINUX; \
li r10,SOFTEN_VALUE_##vec; \
- beq masked_##h##interrupt
+ bne masked_##h##interrupt
#define _SOFTEN_TEST(h, vec) __SOFTEN_TEST(h, vec)
#define SOFTEN_TEST_PR(vec) \
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index c19169ac1fbb..e457438c6fdf 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -32,6 +32,7 @@
*/
#define IRQ_DISABLE_MASK_NONE 0
#define IRQ_DISABLE_MASK_LINUX 1
+#define IRQ_DISABLE_MASK_PMU 2
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index d0ed2a7d7d10..9ff09747a226 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -48,11 +48,11 @@
#define RECONCILE_IRQ_STATE(__rA, __rB) \
lbz __rA,PACASOFTIRQEN(r13); \
lbz __rB,PACAIRQHAPPENED(r13); \
- cmpwi cr0,__rA,IRQ_DISABLE_MASK_LINUX;\
+ andi. __rA,__rA,IRQ_DISABLE_MASK_LINUX;\
li __rA,IRQ_DISABLE_MASK_LINUX; \
ori __rB,__rB,PACA_IRQ_HARD_DIS; \
stb __rB,PACAIRQHAPPENED(r13); \
- beq 44f; \
+ bne 44f; \
stb __rA,PACASOFTIRQEN(r13); \
TRACE_DISABLE_INTS; \
44:
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index b50d79e5bfbc..99bab5c65734 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -764,8 +764,8 @@ restore:
*/
ld r5,SOFTE(r1)
lbz r6,PACASOFTIRQEN(r13)
- cmpwi cr0,r5,IRQ_DISABLE_MASK_LINUX
- beq restore_irq_off
+ andi. r5,r5,IRQ_DISABLE_MASK_LINUX
+ bne restore_irq_off
/* We are enabling, were we already enabled ? Yes, just return */
cmpwi cr0,r6,IRQ_DISABLE_MASK_NONE
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 5c628b5696f6..8e40df2c2f30 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -212,8 +212,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
/* Interrupts had better not already be enabled... */
twnei r6,IRQ_DISABLE_MASK_LINUX
- cmpwi cr0,r5,IRQ_DISABLE_MASK_LINUX
- beq 1f
+ andi. r5,r5,IRQ_DISABLE_MASK_LINUX
+ bne 1f
TRACE_ENABLE_INTS
stb r5,PACASOFTIRQEN(r13)
@@ -352,7 +352,7 @@ ret_from_mc_except:
#define PROLOG_ADDITION_MASKABLE_GEN(n) \
lbz r10,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \
- cmpwi cr0,r10,IRQ_DISABLE_MASK_LINUX;/* yes -> go out of line */ \
+ andi. r10,r10,IRQ_DISABLE_MASK_LINUX;/* yes -> go out of line */ \
beq masked_interrupt_book3e_##n
#define PROLOG_ADDITION_2REGS_GEN(n) \
--
2.7.4
next prev parent reply other threads:[~2016-08-28 18:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-28 18:37 [RFC PATCH v4 00/12] powerpc: "paca->soft_enabled" based local atomic operation implementation Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 01/12] powerpc: Add #defs for paca->soft_enabled flags Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 02/12] powerpc: Cleanup to use IRQ_DISABLE_MASK_* macros for paca->soft_enabled update Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 03/12] powerpc: move set_soft_enabled() Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 04/12] powerpc: Use set_soft_enabled api to update paca->soft_enabled Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 05/12] powerpc: reverse the soft_enable logic Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 06/12] powerpc: Avoid using EXCEPTION_PROLOG_1 macro in MASKABLE_* Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 07/12] powerpc: Add new _EXCEPTION_PROLOG_1 macro Madhavan Srinivasan
2016-08-28 18:37 ` Madhavan Srinivasan [this message]
2016-08-28 18:37 ` [RFC PATCH v4 09/12] powerpc: Add "bitmask" paramater to MASKABLE_* macros Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 10/12] powerpc: Add support to mask perf interrupts and replay Madhavan Srinivasan
2016-08-28 18:37 ` [RFC PATCH v4 11/12] powerpc: Add a Kconfig and a function to set new soft_enabled mask Madhavan Srinivasan
2016-08-29 0:23 ` Nicholas Piggin
2016-08-29 1:41 ` Nicholas Piggin
2016-08-29 5:58 ` Madhavan Srinivasan
2016-09-05 17:18 ` Madhavan Srinivasan
2016-09-05 18:01 ` Madhavan Srinivasan
2016-09-07 12:39 ` Nicholas Piggin
2016-08-28 18:37 ` [RFC PATCH v4 12/12] powerpc: rewrite local_t using soft_irq Madhavan Srinivasan
2016-08-29 1:15 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472409448-18172-9-git-send-email-maddy@linux.vnet.ibm.com \
--to=maddy@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).