linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Yangbo Lu <yangbo.lu@nxp.com>
To: <linux-mmc@vger.kernel.org>, <ulf.hansson@linaro.org>,
	Scott Wood <oss@buserror.net>, Arnd Bergmann <arnd@arndb.de>
Cc: <linuxppc-dev@lists.ozlabs.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-i2c@vger.kernel.org>, <iommu@lists.linux-foundation.org>,
	<netdev@vger.kernel.org>, Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Russell King <linux@arm.linux.org.uk>,
	Jochen Friedrich <jochen@scram.de>,
	Joerg Roedel <joro@8bytes.org>,
	Claudiu Manoil <claudiu.manoil@freescale.com>,
	"Bhupesh Sharma" <bhupesh.sharma@freescale.com>,
	Qiang Zhao <qiang.zhao@nxp.com>,
	"Kumar Gala" <galak@codeaurora.org>,
	Santosh Shilimkar <ssantosh@kernel.org>, <leoyang.li@nxp.com>,
	<xiaobo.xie@nxp.com>, Yangbo Lu <yangbo.lu@nxp.com>
Subject: [v11, 4/8] powerpc/fsl: move mpc85xx.h to include/linux/fsl
Date: Tue, 6 Sep 2016 16:28:19 +0800	[thread overview]
Message-ID: <1473150503-9550-5-git-send-email-yangbo.lu@nxp.com> (raw)
In-Reply-To: <1473150503-9550-1-git-send-email-yangbo.lu@nxp.com>

Move mpc85xx.h to include/linux/fsl and rename it to svr.h as a common
header file.  This SVR numberspace is used on some ARM chips as well as
PPC, and even to check for a PPC SVR multi-arch drivers would otherwise
need to ifdef the header inclusion and all references to the SVR symbols.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
[scottwood: update description]
Signed-off-by: Scott Wood <oss@buserror.net>
---
Changes for v2:
	- None
Changes for v3:
	- None
Changes for v4:
	- None
Changes for v5:
	- Changed to Move mpc85xx.h to include/linux/fsl/
	- Adjusted '#include <linux/fsl/svr.h>' position in file
Changes for v6:
	- None
Changes for v7:
	- Added 'Acked-by: Wolfram Sang' for I2C part
	- Also applied to arch/powerpc/kernel/cpu_setup_fsl_booke.S
Changes for v8:
	- Added 'Acked-by: Stephen Boyd' for clk part
	- Added 'Acked-by: Scott Wood'
	- Added 'Acked-by: Joerg Roedel' for iommu part
Changes for v9:
	- None
Changes for v10:
	- None
Changes for v11:
	- Updated description by Scott
---
 arch/powerpc/kernel/cpu_setup_fsl_booke.S                     | 2 +-
 arch/powerpc/sysdev/fsl_pci.c                                 | 2 +-
 drivers/clk/clk-qoriq.c                                       | 3 +--
 drivers/i2c/busses/i2c-mpc.c                                  | 2 +-
 drivers/iommu/fsl_pamu.c                                      | 3 +--
 drivers/net/ethernet/freescale/gianfar.c                      | 2 +-
 arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h | 4 ++--
 7 files changed, 8 insertions(+), 10 deletions(-)
 rename arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h (97%)

diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 462aed9..2b0284e 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -13,13 +13,13 @@
  *
  */
 
+#include <linux/fsl/svr.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 #include <asm/mmu-book3e.h>
 #include <asm/asm-offsets.h>
-#include <asm/mpc85xx.h>
 
 _GLOBAL(__e500_icache_setup)
 	mfspr	r0, SPRN_L1CSR1
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 0ef9df4..0fd1895 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/fsl/edac.h>
+#include <linux/fsl/svr.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
@@ -37,7 +38,6 @@
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 #include <asm/machdep.h>
-#include <asm/mpc85xx.h>
 #include <asm/disassemble.h>
 #include <asm/ppc-opcode.h>
 #include <sysdev/fsl_soc.h>
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 58566a17..4b6c438 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -13,6 +13,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -1149,8 +1150,6 @@ bad_args:
 }
 
 #ifdef CONFIG_PPC
-#include <asm/mpc85xx.h>
-
 static const u32 a4510_svrs[] __initconst = {
 	(SVR_P2040 << 8) | 0x10,	/* P2040 1.0 */
 	(SVR_P2040 << 8) | 0x11,	/* P2040 1.1 */
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 48ecffe..600704c 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -27,9 +27,9 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/fsl/svr.h>
 
 #include <asm/mpc52xx.h>
-#include <asm/mpc85xx.h>
 #include <sysdev/fsl_soc.h>
 
 #define DRV_NAME "mpc-i2c"
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index a34355f..af8fb27 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -21,11 +21,10 @@
 #include "fsl_pamu.h"
 
 #include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 
-#include <asm/mpc85xx.h>
-
 /* define indexes for each operation mapping scenario */
 #define OMI_QMAN        0x00
 #define OMI_FMAN        0x01
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index d20935d..b8dac84 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -86,11 +86,11 @@
 #include <linux/udp.h>
 #include <linux/in.h>
 #include <linux/net_tstamp.h>
+#include <linux/fsl/svr.h>
 
 #include <asm/io.h>
 #ifdef CONFIG_PPC
 #include <asm/reg.h>
-#include <asm/mpc85xx.h>
 #endif
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/include/asm/mpc85xx.h b/include/linux/fsl/svr.h
similarity index 97%
rename from arch/powerpc/include/asm/mpc85xx.h
rename to include/linux/fsl/svr.h
index 213f3a8..8d13836 100644
--- a/arch/powerpc/include/asm/mpc85xx.h
+++ b/include/linux/fsl/svr.h
@@ -9,8 +9,8 @@
  * (at your option) any later version.
  */
 
-#ifndef __ASM_PPC_MPC85XX_H
-#define __ASM_PPC_MPC85XX_H
+#ifndef FSL_SVR_H
+#define FSL_SVR_H
 
 #define SVR_REV(svr)	((svr) & 0xFF)		/* SOC design resision */
 #define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
-- 
2.1.0.27.g96db324

  parent reply	other threads:[~2016-09-06  8:40 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-06  8:28 [v11, 0/8] Fix eSDHC host version register bug Yangbo Lu
2016-09-06  8:28 ` [v11, 1/8] dt: bindings: update Freescale DCFG compatible Yangbo Lu
2016-09-06  8:28 ` [v11, 2/8] ARM64: dts: ls2080a: add device configuration node Yangbo Lu
2016-09-06  8:28 ` [v11, 3/8] dt: bindings: move guts devicetree doc out of powerpc directory Yangbo Lu
2016-09-06  8:28 ` Yangbo Lu [this message]
2016-09-06  8:28 ` [v11, 5/8] soc: fsl: add GUTS driver for QorIQ platforms Yangbo Lu
2016-09-09  3:47   ` Scott Wood
2016-09-12  6:39     ` Y.B. Lu
2016-09-12 23:25       ` Scott Wood
2016-09-13  7:23         ` Y.B. Lu
2016-09-13 22:24           ` Scott Wood
2016-09-06  8:28 ` [v11, 6/8] MAINTAINERS: add entry for Freescale SoC drivers Yangbo Lu
2016-09-06  8:28 ` [v11, 7/8] base: soc: introduce soc_device_match() interface Yangbo Lu
2016-09-06 11:44   ` Ulf Hansson
2016-09-06 12:46     ` Arnd Bergmann
2016-09-07  4:10       ` Y.B. Lu
2016-09-06  8:28 ` [v11, 8/8] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0 Yangbo Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473150503-9550-5-git-send-email-yangbo.lu@nxp.com \
    --to=yangbo.lu@nxp.com \
    --cc=arnd@arndb.de \
    --cc=bhupesh.sharma@freescale.com \
    --cc=claudiu.manoil@freescale.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jochen@scram.de \
    --cc=joro@8bytes.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=oss@buserror.net \
    --cc=qiang.zhao@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=xiaobo.xie@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).