From: Paul Mackerras <paulus@ozlabs.org>
To: linuxppc-dev@ozlabs.org, kvm@vger.kernel.org, kvm-ppc@vger.kernel.org
Subject: [PATCH 02/18] powerpc/64: Fixes for the ibm, client-architecture-support options
Date: Thu, 12 Jan 2017 20:07:10 +1100 [thread overview]
Message-ID: <1484212046-29591-3-git-send-email-paulus@ozlabs.org> (raw)
In-Reply-To: <1484212046-29591-1-git-send-email-paulus@ozlabs.org>
This fixes the values for some of the option vector 5 bits in
the ibm,client-architecture-support vector 5. The "platform
facilities options" bits are in byte 17 not byte 14, so the
upper 8 bits of their definitions need to be 0x11 not 0x0E.
The "sub processor support" option is in byte 21 not byte 15.
When checking whether option bits are set, we should check that
the offset of the byte being checked is less than the vector
length that we got from the hypervisor.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---
arch/powerpc/include/asm/prom.h | 8 ++++----
arch/powerpc/platforms/pseries/firmware.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 5e57705..e6d83d0 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -151,10 +151,10 @@ struct of_drconf_cell {
#define OV5_XCMO 0x0440 /* Page Coalescing */
#define OV5_TYPE1_AFFINITY 0x0580 /* Type 1 NUMA affinity */
#define OV5_PRRN 0x0540 /* Platform Resource Reassignment */
-#define OV5_PFO_HW_RNG 0x0E80 /* PFO Random Number Generator */
-#define OV5_PFO_HW_842 0x0E40 /* PFO Compression Accelerator */
-#define OV5_PFO_HW_ENCR 0x0E20 /* PFO Encryption Accelerator */
-#define OV5_SUB_PROCESSORS 0x0F01 /* 1,2,or 4 Sub-Processors supported */
+#define OV5_PFO_HW_RNG 0x1180 /* PFO Random Number Generator */
+#define OV5_PFO_HW_842 0x1140 /* PFO Compression Accelerator */
+#define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */
+#define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index ea7f09b..7d67623 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -126,7 +126,7 @@ static void __init fw_vec5_feature_init(const char *vec5, unsigned long len)
index = OV5_INDX(vec5_fw_features_table[i].feature);
feat = OV5_FEAT(vec5_fw_features_table[i].feature);
- if (vec5[index] & feat)
+ if (index < len && (vec5[index] & feat))
powerpc_firmware_features |=
vec5_fw_features_table[i].val;
}
--
2.7.4
next prev parent reply other threads:[~2017-01-12 9:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-12 9:07 [PATCH 00/18] Support for radix guest and host on POWER9 Paul Mackerras
2017-01-12 9:07 ` [PATCH 01/18] powerpc/64: Don't try to use radix MMU under a hypervisor Paul Mackerras
2017-01-12 16:48 ` Balbir Singh
2017-01-12 9:07 ` Paul Mackerras [this message]
2017-01-12 9:07 ` [PATCH 03/18] powerpc/64: Always enable radix support for 64-bit Book 3S kernels Paul Mackerras
2017-01-12 9:07 ` [PATCH 04/18] powerpc/64: Enable use of radix MMU under hypervisor on POWER9 Paul Mackerras
2017-01-22 2:17 ` kbuild test robot
2017-01-12 9:07 ` [PATCH 05/18] powerpc/64: More definitions for POWER9 Paul Mackerras
2017-01-12 9:07 ` [PATCH 06/18] powerpc/64: Export pgtable_cache and pgtable_cache_add for KVM Paul Mackerras
2017-01-12 9:07 ` [PATCH 07/18] powerpc/64: Make type of partition table flush depend on partition type Paul Mackerras
2017-01-12 9:07 ` [PATCH 08/18] KVM: PPC: Book3S HV: Don't try to signal cpu -1 Paul Mackerras
2017-01-12 9:07 ` [PATCH 09/18] KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU Paul Mackerras
2017-01-12 9:07 ` [PATCH 10/18] KVM: PPC: Book3S HV: Set process table for HPT guests on POWER9 Paul Mackerras
2017-01-23 2:39 ` Suraj Jitindar Singh
2017-01-23 4:37 ` Paul Mackerras
2017-01-12 9:07 ` [PATCH 11/18] KVM: PPC: Book3S HV: Add basic infrastructure for radix guests Paul Mackerras
2017-01-12 9:07 ` [PATCH 12/18] KVM: PPC: Book3S HV: Modify guest entry/exit paths to handle " Paul Mackerras
2017-01-12 9:07 ` [PATCH 13/18] KVM: PPC: Book3S HV: Page table construction and page faults for " Paul Mackerras
2017-01-23 3:17 ` Suraj Jitindar Singh
2017-01-23 4:38 ` Paul Mackerras
2017-01-12 9:07 ` [PATCH 14/18] KVM: PPC: Book3S HV: MMU notifier callbacks " Paul Mackerras
2017-01-23 3:21 ` Suraj Jitindar Singh
2017-01-12 9:07 ` [PATCH 15/18] KVM: PPC: Book3S HV: Implement dirty page logging " Paul Mackerras
2017-01-12 9:07 ` [PATCH 16/18] KVM: PPC: Book3S HV: Make HPT-specific hypercalls return error in radix mode Paul Mackerras
2017-01-12 9:07 ` [PATCH 17/18] KVM: PPC: Book3S HV: Enable radix guest support Paul Mackerras
2017-01-23 3:31 ` Suraj Jitindar Singh
2017-01-12 9:07 ` [PATCH 18/18] KVM: PPC: Book3S HV: Use ASDR for HPT guests on POWER9 Paul Mackerras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484212046-29591-3-git-send-email-paulus@ozlabs.org \
--to=paulus@ozlabs.org \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).