linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Reza Arbab <arbab@linux.vnet.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Balbir Singh <bsingharora@gmail.com>,
	Alistair Popple <apopple@au1.ibm.com>
Subject: [PATCH v5 1/4] powerpc/mm: refactor radix physical page mapping
Date: Mon, 16 Jan 2017 13:07:43 -0600	[thread overview]
Message-ID: <1484593666-8001-2-git-send-email-arbab@linux.vnet.ibm.com> (raw)
In-Reply-To: <1484593666-8001-1-git-send-email-arbab@linux.vnet.ibm.com>

Move the page mapping code in radix_init_pgtable() into a separate
function that will also be used for memory hotplug.

The current goto loop progressively decreases its mapping size as it
covers the tail of a range whose end is unaligned. Change this to a for
loop which can do the same for both ends of the range.

Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
---
 arch/powerpc/mm/pgtable-radix.c | 88 +++++++++++++++++++++++------------------
 1 file changed, 50 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 623a0dc..2ce1354 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -107,54 +107,66 @@ int radix__map_kernel_page(unsigned long ea, unsigned long pa,
 	return 0;
 }
 
+static inline void __meminit print_mapping(unsigned long start,
+					   unsigned long end,
+					   unsigned long size)
+{
+	if (end <= start)
+		return;
+
+	pr_info("Mapped range 0x%lx - 0x%lx with 0x%lx\n", start, end, size);
+}
+
+static int __meminit create_physical_mapping(unsigned long start,
+					     unsigned long end)
+{
+	unsigned long addr, mapping_size;
+
+	start = _ALIGN_UP(start, PAGE_SIZE);
+	for (addr = start; addr < end; addr += mapping_size) {
+		unsigned long gap, previous_size;
+		int rc;
+
+		gap = end - addr;
+		previous_size = mapping_size;
+
+		if (IS_ALIGNED(addr, PUD_SIZE) && gap >= PUD_SIZE &&
+		    mmu_psize_defs[MMU_PAGE_1G].shift)
+			mapping_size = PUD_SIZE;
+		else if (IS_ALIGNED(addr, PMD_SIZE) && gap >= PMD_SIZE &&
+			 mmu_psize_defs[MMU_PAGE_2M].shift)
+			mapping_size = PMD_SIZE;
+		else
+			mapping_size = PAGE_SIZE;
+
+		if (mapping_size != previous_size) {
+			print_mapping(start, addr, previous_size);
+			start = addr;
+		}
+
+		rc = radix__map_kernel_page((unsigned long)__va(addr), addr,
+					    PAGE_KERNEL_X, mapping_size);
+		if (rc)
+			return rc;
+	}
+
+	print_mapping(start, addr, mapping_size);
+	return 0;
+}
+
 static void __init radix_init_pgtable(void)
 {
-	int loop_count;
-	u64 base, end, start_addr;
 	unsigned long rts_field;
 	struct memblock_region *reg;
-	unsigned long linear_page_size;
 
 	/* We don't support slb for radix */
 	mmu_slb_size = 0;
 	/*
 	 * Create the linear mapping, using standard page size for now
 	 */
-	loop_count = 0;
-	for_each_memblock(memory, reg) {
-
-		start_addr = reg->base;
-
-redo:
-		if (loop_count < 1 && mmu_psize_defs[MMU_PAGE_1G].shift)
-			linear_page_size = PUD_SIZE;
-		else if (loop_count < 2 && mmu_psize_defs[MMU_PAGE_2M].shift)
-			linear_page_size = PMD_SIZE;
-		else
-			linear_page_size = PAGE_SIZE;
-
-		base = _ALIGN_UP(start_addr, linear_page_size);
-		end = _ALIGN_DOWN(reg->base + reg->size, linear_page_size);
-
-		pr_info("Mapping range 0x%lx - 0x%lx with 0x%lx\n",
-			(unsigned long)base, (unsigned long)end,
-			linear_page_size);
-
-		while (base < end) {
-			radix__map_kernel_page((unsigned long)__va(base),
-					      base, PAGE_KERNEL_X,
-					      linear_page_size);
-			base += linear_page_size;
-		}
-		/*
-		 * map the rest using lower page size
-		 */
-		if (end < reg->base + reg->size) {
-			start_addr = end;
-			loop_count++;
-			goto redo;
-		}
-	}
+	for_each_memblock(memory, reg)
+		WARN_ON(create_physical_mapping(reg->base,
+						reg->base + reg->size));
 	/*
 	 * Allocate Partition table and process table for the
 	 * host.
-- 
1.8.3.1

  reply	other threads:[~2017-01-16 19:07 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-16 19:07 [PATCH v5 0/4] powerpc/mm: enable memory hotplug on radix Reza Arbab
2017-01-16 19:07 ` Reza Arbab [this message]
2017-01-17  6:46   ` [PATCH v5 1/4] powerpc/mm: refactor radix physical page mapping Balbir Singh
2017-01-17 18:34     ` Reza Arbab
2017-01-18  1:14       ` Balbir Singh
2017-01-30  8:38   ` Michael Ellerman
2017-01-30 17:28     ` Reza Arbab
2017-01-30 21:58       ` Michael Ellerman
2017-02-01  1:05   ` [v5,1/4] " Michael Ellerman
2017-01-16 19:07 ` [PATCH v5 2/4] powerpc/mm: add radix__create_section_mapping() Reza Arbab
2017-01-17  6:48   ` Balbir Singh
2017-01-16 19:07 ` [PATCH v5 3/4] powerpc/mm: add radix__remove_section_mapping() Reza Arbab
2017-01-17  7:22   ` Balbir Singh
2017-01-17 18:36     ` Reza Arbab
2017-01-18  1:22       ` Balbir Singh
2017-01-16 19:07 ` [PATCH v5 4/4] powerpc/mm: unstub radix__vmemmap_remove_mapping() Reza Arbab
2017-01-17  7:25   ` Balbir Singh
2017-01-17 18:36     ` Reza Arbab
2017-01-18  1:53       ` Balbir Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484593666-8001-2-git-send-email-arbab@linux.vnet.ibm.com \
    --to=arbab@linux.vnet.ibm.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=apopple@au1.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).