linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Christophe Lombard <clombard@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, fbarrat@linux.vnet.ibm.com,
	imunsie@au1.ibm.com, andrew.donnellan@au1.ibm.com
Subject: [PATCH V4 2/7] cxl: Remove unused values in bare-metal environment.
Date: Fri,  7 Apr 2017 16:11:54 +0200	[thread overview]
Message-ID: <1491574319-11852-3-git-send-email-clombard@linux.vnet.ibm.com> (raw)
In-Reply-To: <1491574319-11852-1-git-send-email-clombard@linux.vnet.ibm.com>

The two previously fields pid and tid, located in the structure
cxl_irq_info, are only used in the guest environment. To avoid confusion,
it's not necessary to fill the fields in the bare-metal environment.
Pid_tid is now renamed to 'reserved' to avoid undefined behavior on
bare-metal. The PSL Process and Thread Identification Register
(CXL_PSL_PID_TID_An) is only used when attaching a dedicated process
for PSL8 only. This register goes away in CAIA2.

Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
---
 drivers/misc/cxl/cxl.h    | 20 ++++----------------
 drivers/misc/cxl/hcalls.c |  6 +++---
 drivers/misc/cxl/native.c |  5 -----
 3 files changed, 7 insertions(+), 24 deletions(-)

diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index 79e60ec..36bc213 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -888,27 +888,15 @@ int __detach_context(struct cxl_context *ctx);
 /*
  * This must match the layout of the H_COLLECT_CA_INT_INFO retbuf defined
  * in PAPR.
- * A word about endianness: a pointer to this structure is passed when
- * calling the hcall. However, it is not a block of memory filled up by
- * the hypervisor. The return values are found in registers, and copied
- * one by one when returning from the hcall. See the end of the call to
- * plpar_hcall9() in hvCall.S
- * As a consequence:
- * - we don't need to do any endianness conversion
- * - the pid and tid are an exception. They are 32-bit values returned in
- *   the same 64-bit register. So we do need to worry about byte ordering.
+ * Field pid_tid is now 'reserved' because it's no more used on bare-metal.
+ * On a guest environment, PSL_PID_An is located on the upper 32 bits and
+ * PSL_TID_An register in the lower 32 bits.
  */
 struct cxl_irq_info {
 	u64 dsisr;
 	u64 dar;
 	u64 dsr;
-#ifndef CONFIG_CPU_LITTLE_ENDIAN
-	u32 pid;
-	u32 tid;
-#else
-	u32 tid;
-	u32 pid;
-#endif
+	u64 reserved;
 	u64 afu_err;
 	u64 errstat;
 	u64 proc_handle;
diff --git a/drivers/misc/cxl/hcalls.c b/drivers/misc/cxl/hcalls.c
index d6d11f4..9b8bb0f 100644
--- a/drivers/misc/cxl/hcalls.c
+++ b/drivers/misc/cxl/hcalls.c
@@ -413,9 +413,9 @@ long cxl_h_collect_int_info(u64 unit_address, u64 process_token,
 
 	switch (rc) {
 	case H_SUCCESS:     /* The interrupt info is returned in return registers. */
-		pr_devel("dsisr:%#llx, dar:%#llx, dsr:%#llx, pid:%u, tid:%u, afu_err:%#llx, errstat:%#llx\n",
-			info->dsisr, info->dar, info->dsr, info->pid,
-			info->tid, info->afu_err, info->errstat);
+		pr_devel("dsisr:%#llx, dar:%#llx, dsr:%#llx, pid_tid:%#llx, afu_err:%#llx, errstat:%#llx\n",
+			info->dsisr, info->dar, info->dsr, info->reserved,
+			info->afu_err, info->errstat);
 		return 0;
 	case H_PARAMETER:   /* An incorrect parameter was supplied. */
 		return -EINVAL;
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index 7ae7105..7257e8b 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -859,8 +859,6 @@ static int native_detach_process(struct cxl_context *ctx)
 
 static int native_get_irq_info(struct cxl_afu *afu, struct cxl_irq_info *info)
 {
-	u64 pidtid;
-
 	/* If the adapter has gone away, we can't get any meaningful
 	 * information.
 	 */
@@ -870,9 +868,6 @@ static int native_get_irq_info(struct cxl_afu *afu, struct cxl_irq_info *info)
 	info->dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
 	info->dar = cxl_p2n_read(afu, CXL_PSL_DAR_An);
 	info->dsr = cxl_p2n_read(afu, CXL_PSL_DSR_An);
-	pidtid = cxl_p2n_read(afu, CXL_PSL_PID_TID_An);
-	info->pid = pidtid >> 32;
-	info->tid = pidtid & 0xffffffff;
 	info->afu_err = cxl_p2n_read(afu, CXL_AFU_ERR_An);
 	info->errstat = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
 	info->proc_handle = 0;
-- 
2.7.4

  parent reply	other threads:[~2017-04-07 14:12 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-07 14:11 [PATCH V4 0/7] cxl: Add support for Coherent Accelerator Interface Architecture 2.0 Christophe Lombard
2017-04-07 14:11 ` [PATCH V4 1/7] cxl: Read vsec perst load image Christophe Lombard
2017-04-10  4:00   ` Andrew Donnellan
2017-04-10 16:40   ` Frederic Barrat
2017-04-19  3:47   ` [V4,1/7] " Michael Ellerman
2017-04-07 14:11 ` Christophe Lombard [this message]
2017-04-10  5:25   ` [PATCH V4 2/7] cxl: Remove unused values in bare-metal environment Andrew Donnellan
2017-04-10 16:41   ` Frederic Barrat
2017-04-07 14:11 ` [PATCH V4 3/7] cxl: Keep track of mm struct associated with a context Christophe Lombard
2017-04-10  5:38   ` Andrew Donnellan
2017-04-10 16:49   ` Frederic Barrat
2017-04-07 14:11 ` [PATCH V4 4/7] cxl: Update implementation service layer Christophe Lombard
2017-04-10  7:08   ` Andrew Donnellan
2017-04-10 17:01   ` Frederic Barrat
2017-04-07 14:11 ` [PATCH V4 5/7] cxl: Rename some psl8 specific functions Christophe Lombard
2017-04-10  6:14   ` Andrew Donnellan
2017-04-10 17:06   ` Frederic Barrat
2017-04-07 14:11 ` [PATCH V4 6/7] cxl: Isolate few psl8 specific calls Christophe Lombard
2017-04-10 17:13   ` Frederic Barrat
2017-04-12  2:13     ` Michael Ellerman
2017-04-07 14:11 ` [PATCH V4 7/7] cxl: Add psl9 specific code Christophe Lombard
2017-04-11 14:41   ` Frederic Barrat
2017-04-12  2:11     ` Michael Ellerman
2017-04-12  8:30       ` christophe lombard
2017-04-12 11:47         ` Michael Ellerman
2017-04-12  7:52   ` Andrew Donnellan
2017-04-12 11:57     ` Frederic Barrat
2017-04-13 11:05       ` Michael Ellerman
2017-04-12 14:34   ` [PATCH V4 7/7 remix] " Frederic Barrat
2017-04-19  3:47     ` [V4,7/7,remix] " Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1491574319-11852-3-git-send-email-clombard@linux.vnet.ibm.com \
    --to=clombard@linux.vnet.ibm.com \
    --cc=andrew.donnellan@au1.ibm.com \
    --cc=fbarrat@linux.vnet.ibm.com \
    --cc=imunsie@au1.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).