linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	mikey@neuling.org, stewart@linux.vnet.ibm.com,
	apopple@au1.ibm.com, hbabu@us.ibm.com, oohall@gmail.com,
	bsingharora@gmail.com, linuxppc-dev@ozlabs.org,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 10/10] VAS: Define copy/paste interfaces
Date: Wed, 24 May 2017 22:39:50 -0700	[thread overview]
Message-ID: <1495690790-12172-11-git-send-email-sukadev@linux.vnet.ibm.com> (raw)
In-Reply-To: <1495690790-12172-1-git-send-email-sukadev@linux.vnet.ibm.com>

Define interfaces (wrappers) to the 'copy' and 'paste' instructions
(which are new in PowerISA 3.0). These are intended to be used to
by NX driver(s) to submit Coprocessor Request Blocks (CRBs) to the
NX hardware engines.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>

---
Changelog[v4]
	- Export symbols
Changelog[v3]
	- Map raw CR value from paste instruction into an error code.
---
 arch/powerpc/include/asm/vas.h              | 13 +++++
 arch/powerpc/platforms/powernv/copy-paste.h | 74 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/vas-window.c | 52 ++++++++++++++++++++
 arch/powerpc/platforms/powernv/vas.h        | 14 ++++++
 4 files changed, 153 insertions(+)
 create mode 100644 arch/powerpc/platforms/powernv/copy-paste.h

diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h
index 944bb4b..4e5a470 100644
--- a/arch/powerpc/include/asm/vas.h
+++ b/arch/powerpc/include/asm/vas.h
@@ -125,4 +125,17 @@ struct vas_window *vas_tx_win_open(int vasid, enum vas_cop_type cop,
  */
 int vas_win_close(struct vas_window *win);
 
+/*
+ * Copy the co-processor request block (CRB) @crb into the local L2 cache.
+ * For now, @offset must be 0 and @first must be true.
+ */
+extern int vas_copy_crb(void *crb, int offset, bool first);
+
+/*
+ * Paste a previously copied CRB (see vas_copy_crb()) from the L2 cache to
+ * the hardware address associated with the window @win. For now, @off must
+ * 0 and @last must be true. @re is expected/assumed to be true for NX windows.
+ */
+extern int vas_paste_crb(struct vas_window *win, int off, bool last, bool re);
+
 #endif /* _MISC_VAS_H */
diff --git a/arch/powerpc/platforms/powernv/copy-paste.h b/arch/powerpc/platforms/powernv/copy-paste.h
new file mode 100644
index 0000000..7783bb8
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/copy-paste.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * Macros taken from tools/testing/selftests/powerpc/context_switch/cp_abort.c
+ */
+#define PASTE(RA, RB, L, RC) \
+	.long (0x7c00070c | (RA) << (31-15) | (RB) << (31-20) \
+			  | (L) << (31-10) | (RC) << (31-31))
+
+#define COPY(RA, RB, L) \
+	.long (0x7c00060c | (RA) << (31-15) | (RB) << (31-20) \
+			  | (L) << (31-10))
+
+#define CR0_FXM		"0x80"
+#define CR0_SHIFT	28
+#define CR0_MASK	0xF
+/*
+ * Copy/paste instructions:
+ *
+ *	copy RA,RB,L
+ *		Copy contents of address (RA) + effective_address(RB)
+ *		to internal copy-buffer.
+ *
+ *		L == 1 indicates this is the first copy.
+ *
+ *		L == 0 indicates its a continuation of a prior first copy.
+ *
+ *	paste RA,RB,L
+ *		Paste contents of internal copy-buffer to the address
+ *		(RA) + effective_address(RB)
+ *
+ *		L == 0 indicates its a continuation of a prior paste. i.e.
+ *		don't wait for the completion or update status.
+ *
+ *		L == 1 indicates this is the last paste in the group (i.e.
+ *		wait for the group to complete and update status in CR0).
+ *
+ *	For Power9, the L bit must be 'true' in both copy and paste.
+ */
+
+static inline int vas_copy(void *crb, int offset, int first)
+{
+	WARN_ON_ONCE(!first);
+
+	__asm__ __volatile(stringify_in_c(COPY(%0, %1, %2))";"
+		:
+		: "b" (offset), "b" (crb), "i" (1)
+		: "memory");
+
+	return 0;
+}
+
+static inline int vas_paste(void *paste_address, int offset, int last)
+{
+	unsigned long long cr;
+
+	WARN_ON_ONCE(!last);
+
+	cr = 0;
+	__asm__ __volatile(stringify_in_c(PASTE(%1, %2, 1, 1))";"
+		"mfocrf %0," CR0_FXM ";"
+		: "=r" (cr)
+		: "b" (paste_address), "b" (offset)
+		: "memory");
+
+	return cr;
+}
diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c
index 4a4fd68..06e9c39 100644
--- a/arch/powerpc/platforms/powernv/vas-window.c
+++ b/arch/powerpc/platforms/powernv/vas-window.c
@@ -14,6 +14,7 @@
 #include <linux/log2.h>
 
 #include "vas.h"
+#include "copy-paste.h"
 
 static int fault_winid;
 
@@ -901,6 +902,57 @@ struct vas_window *vas_tx_win_open(int vasid, enum vas_cop_type cop,
 }
 EXPORT_SYMBOL_GPL(vas_tx_win_open);
 
+int vas_copy_crb(void *crb, int offset, bool first)
+{
+	if (!vas_initialized())
+		return -1;
+
+	return vas_copy(crb, offset, first);
+}
+EXPORT_SYMBOL_GPL(vas_copy_crb);
+
+#define RMA_LSMP_REPORT_ENABLE PPC_BIT(53)
+int vas_paste_crb(struct vas_window *txwin, int offset, bool last, bool re)
+{
+	int rc;
+	uint64_t val;
+	void *addr;
+
+	if (!vas_initialized())
+		return -1;
+	/*
+	 * Only NX windows are supported for now and hardware assumes
+	 * report-enable flag is set for NX windows. Ensure software
+	 * complies too.
+	 */
+	WARN_ON_ONCE(!re);
+
+	addr = txwin->paste_kaddr;
+	if (re) {
+		/*
+		 * Set the REPORT_ENABLE bit (equivalent to writing
+		 * to 1K offset of the paste address)
+		 */
+		val = SET_FIELD(RMA_LSMP_REPORT_ENABLE, 0ULL, 1);
+		addr += val;
+	}
+
+	/*
+	 * Map the raw CR value from vas_paste() to an error code (there
+	 * is just pass or fail for now though).
+	 */
+	rc = vas_paste(addr, offset, last);
+	if (rc == 0x20000000)
+		rc = 0;
+	else
+		rc = -EINVAL;
+
+	print_fifo_msg_count(txwin);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(vas_paste_crb);
+
 static void poll_window_busy_state(struct vas_window *window)
 {
 	int busy;
diff --git a/arch/powerpc/platforms/powernv/vas.h b/arch/powerpc/platforms/powernv/vas.h
index 291a08e..bcede85 100644
--- a/arch/powerpc/platforms/powernv/vas.h
+++ b/arch/powerpc/platforms/powernv/vas.h
@@ -448,4 +448,18 @@ static inline uint64_t read_hvwc_reg(struct vas_window *win,
 	return in_be64(win->hvwc_map+reg);
 }
 
+#ifdef vas_debug
+
+static void print_fifo_msg_count(struct vas_window *txwin)
+{
+	uint64_t read_hvwc_reg(struct vas_window *w, char *n, uint64_t o);
+	pr_devel("Winid %d, Msg count %llu\n", txwin->winid,
+			(uint64_t)read_hvwc_reg(txwin, VREG(LRFIFO_PUSH)));
+}
+#else	/* vas_debug */
+
+#define print_fifo_msg_count(window)
+
+#endif	/* vas_debug */
+
 #endif /* _VAS_H */
-- 
2.7.4

      parent reply	other threads:[~2017-05-25  5:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-25  5:39 [PATCH v5 00/11] Enable VAS Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 01/10] VAS: Define macros, register fields and structures Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 02/10] Move GET_FIELD/SET_FIELD to vas.h Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 03/10] VAS: Define vas_init() and vas_exit() Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 04/10] VAS: Define helpers for access MMIO regions Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 05/10] VAS: Define helpers to init window context Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 06/10] VAS: Define helpers to alloc/free windows Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 07/10] VAS: Define vas_rx_win_open() interface Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 08/10] VAS: Define vas_win_close() interface Sukadev Bhattiprolu
2017-05-25  5:39 ` [PATCH v5 09/10] VAS: Define vas_tx_win_open() Sukadev Bhattiprolu
2017-06-07  1:35   ` Sukadev Bhattiprolu
2017-05-25  5:39 ` Sukadev Bhattiprolu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495690790-12172-11-git-send-email-sukadev@linux.vnet.ibm.com \
    --to=sukadev@linux.vnet.ibm.com \
    --cc=apopple@au1.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=hbabu@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mikey@neuling.org \
    --cc=mpe@ellerman.id.au \
    --cc=oohall@gmail.com \
    --cc=stewart@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).