From: Bhumika Goyal <bhumirks@gmail.com>
To: julia.lawall@lip6.fr, ludovic.desroches@microchip.com,
wsa@the-dreams.de, jochen@scram.de, vadimp@mellanox.com,
michaelsh@mellanox.com, benh@kernel.crashing.org,
paulus@samba.org, mpe@ellerman.id.au, andy.gross@linaro.org,
david.brown@linaro.org, ldewangan@nvidia.com,
thierry.reding@gmail.com, jonathanh@nvidia.com,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-tegra@vger.kernel.org
Cc: Bhumika Goyal <bhumirks@gmail.com>
Subject: [PATCH] i2c: busses: make i2c_adapter_quirks const
Date: Mon, 21 Aug 2017 17:42:04 +0530 [thread overview]
Message-ID: <1503317524-21276-1-git-send-email-bhumirks@gmail.com> (raw)
Make these const as they are only stored as a reference in the quirks
field of an i2c_adapter structure, which is const.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
@@
static struct i2c_adapter_quirks s = {...};
@ref@
position p;
identifier match.s;
@@
s@p
@good1@
identifier y;
position ref.p;
identifier match.s;
@@
struct i2c_adapter y = {...,.quirks=&s@p,...};
@good2@
struct i2c_adapter y;
identifier match.s;
position ref.p;
@@
y.quirks = &s@p
@bad depends on !good1 && !good2@
position ref.p;
identifier match.s;
@@
s@p
@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct i2c_adapter_quirks s;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
---
drivers/i2c/busses/i2c-at91.c | 2 +-
drivers/i2c/busses/i2c-cpm.c | 2 +-
drivers/i2c/busses/i2c-mlxcpld.c | 2 +-
drivers/i2c/busses/i2c-opal.c | 2 +-
drivers/i2c/busses/i2c-powermac.c | 2 +-
drivers/i2c/busses/i2c-qup.c | 2 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 38dd61d..bfd1fdf 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -809,7 +809,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
* The hardware can handle at most two messages concatenated by a
* repeated start via it's internal address feature.
*/
-static struct i2c_adapter_quirks at91_twi_quirks = {
+static const struct i2c_adapter_quirks at91_twi_quirks = {
.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
.max_comb_1st_msg_len = 3,
};
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index d89bde2..8a8ca94 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -413,7 +413,7 @@ static u32 cpm_i2c_func(struct i2c_adapter *adap)
};
/* CPM_MAX_READ is also limiting writes according to the code! */
-static struct i2c_adapter_quirks cpm_i2c_quirks = {
+static const struct i2c_adapter_quirks cpm_i2c_quirks = {
.max_num_msgs = CPM_MAXBD,
.max_read_len = CPM_MAX_READ,
.max_write_len = CPM_MAX_READ,
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index d271e6a..4c28fa2 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -433,7 +433,7 @@ static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
.functionality = mlxcpld_i2c_func
};
-static struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
+static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
.max_read_len = MLXCPLD_I2C_DATA_REG_SZ - MLXCPLD_I2C_MAX_ADDR_LEN,
.max_write_len = MLXCPLD_I2C_DATA_REG_SZ,
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
index 11e2a1f..0aabb7e 100644
--- a/drivers/i2c/busses/i2c-opal.c
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -204,7 +204,7 @@ static u32 i2c_opal_func(struct i2c_adapter *adapter)
* For two messages, we basically support simple smbus transactions of a
* write-then-anything.
*/
-static struct i2c_adapter_quirks i2c_opal_quirks = {
+static const struct i2c_adapter_quirks i2c_opal_quirks = {
.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
.max_comb_1st_msg_len = 4,
};
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index ef9c858..f2a2067 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -197,7 +197,7 @@ static u32 i2c_powermac_func(struct i2c_adapter * adapter)
.functionality = i2c_powermac_func,
};
-static struct i2c_adapter_quirks i2c_powermac_quirks = {
+static const struct i2c_adapter_quirks i2c_powermac_quirks = {
.max_num_msgs = 1,
};
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 1902d8a..08f8e01 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1396,7 +1396,7 @@ static u32 qup_i2c_func(struct i2c_adapter *adap)
* the end of the read, the length of the read is specified as one byte
* which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
*/
-static struct i2c_adapter_quirks qup_i2c_quirks = {
+static const struct i2c_adapter_quirks qup_i2c_quirks = {
.max_read_len = QUP_READ_LIMIT,
};
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a238844..60292d2 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -793,7 +793,7 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
};
/* payload size is only 12 bit */
-static struct i2c_adapter_quirks tegra_i2c_quirks = {
+static const struct i2c_adapter_quirks tegra_i2c_quirks = {
.max_read_len = 4096,
.max_write_len = 4096,
};
--
1.9.1
next reply other threads:[~2017-08-21 12:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-21 12:12 Bhumika Goyal [this message]
2017-08-29 20:33 ` [PATCH] i2c: busses: make i2c_adapter_quirks const Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503317524-21276-1-git-send-email-bhumirks@gmail.com \
--to=bhumirks@gmail.com \
--cc=andy.gross@linaro.org \
--cc=benh@kernel.crashing.org \
--cc=david.brown@linaro.org \
--cc=jochen@scram.de \
--cc=jonathanh@nvidia.com \
--cc=julia.lawall@lip6.fr \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=ludovic.desroches@microchip.com \
--cc=michaelsh@mellanox.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=thierry.reding@gmail.com \
--cc=vadimp@mellanox.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).