linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Popple <alistair@popple.id.au>
To: linuxppc-dev@lists.ozlabs.org
Cc: fbarrat@linux.vnet.ibm.com, arbab@linux.vnet.ibm.com,
	mpe@ellerman.id.au, andrew.donnellan@au1.ibm.com,
	Alistair Popple <alistair@popple.id.au>
Subject: [PATCH 2/2] powerpc/powernv/npu: Don't explicitly flush nmmu tlb
Date: Tue,  5 Sep 2017 13:57:44 +1000	[thread overview]
Message-ID: <1504583864-8169-2-git-send-email-alistair@popple.id.au> (raw)
In-Reply-To: <1504583864-8169-1-git-send-email-alistair@popple.id.au>

The nest mmu required an explicit flush as a tlbi would not flush it in the
same way as the core. However an alternate firmware fix exists which should
eliminate the need for this flush, so instead add a device-tree property
(ibm,nmmu-flush) on the NVLink2 PHB to enable it only if required.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
---
 arch/powerpc/platforms/powernv/npu-dma.c | 28 +++++++++++++++++++++++-----
 arch/powerpc/platforms/powernv/pci.h     |  3 +++
 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
index 2fff9a65..4b4fcac 100644
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -395,6 +395,7 @@ struct npu_context {
 	struct pci_dev *npdev[NV_MAX_NPUS][NV_MAX_LINKS];
 	struct mmu_notifier mn;
 	struct kref kref;
+	bool nmmu_flush;
 
 	/* Callback to stop translation requests on a given GPU */
 	struct npu_context *(*release_cb)(struct npu_context *, void *);
@@ -545,11 +546,13 @@ static void mmio_invalidate(struct npu_context *npu_context, int va,
 	struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS];
 	unsigned long pid = npu_context->mm->context.id;
 
-	/*
-	 * Unfortunately the nest mmu does not support flushing specific
-	 * addresses so we have to flush the whole mm.
-	 */
-	flush_all_mm(npu_context->mm);
+	if (npu_context->nmmu_flush)
+		/*
+		 * Unfortunately the nest mmu does not support flushing specific
+		 * addresses so we have to flush the whole mm once before
+		 * shooting down the GPU translation.
+		 */
+		flush_all_mm(npu_context->mm);
 
 	/*
 	 * Loop over all the NPUs this process is active on and launch
@@ -722,6 +725,16 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
 		return ERR_PTR(-ENODEV);
 	npu_context->npdev[npu->index][nvlink_index] = npdev;
 
+	if (!nphb->npu.nmmu_flush) {
+		/*
+		 * If we're not explicitly flushing ourselves we need to mark
+		 * the thread for global flushes
+		 */
+		npu_context->nmmu_flush = false;
+		inc_mm_active_cpus(mm);
+	} else
+		npu_context->nmmu_flush = true;
+
 	return npu_context;
 }
 EXPORT_SYMBOL(pnv_npu2_init_context);
@@ -731,6 +744,9 @@ static void pnv_npu2_release_context(struct kref *kref)
 	struct npu_context *npu_context =
 		container_of(kref, struct npu_context, kref);
 
+	if (!npu_context->nmmu_flush)
+		dec_mm_active_cpus(npu_context->mm);
+
 	npu_context->mm->context.npu_context = NULL;
 	mmu_notifier_unregister(&npu_context->mn,
 				npu_context->mm);
@@ -819,6 +835,8 @@ int pnv_npu2_init(struct pnv_phb *phb)
 	static int npu_index;
 	uint64_t rc = 0;
 
+	phb->npu.nmmu_flush =
+		of_property_read_bool(phb->hose->dn, "ibm,nmmu-flush");
 	for_each_child_of_node(phb->hose->dn, dn) {
 		gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
 		if (gpdev) {
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index a95273c..22025c6 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -187,6 +187,9 @@ struct pnv_phb {
 
 		/* Bitmask for MMIO register usage */
 		unsigned long mmio_atsd_usage;
+
+		/* Do we need to explicitly flush the nest mmu? */
+		bool nmmu_flush;
 	} npu;
 
 #ifdef CONFIG_CXL_BASE
-- 
2.1.4

  reply	other threads:[~2017-09-05  3:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-05  3:57 [PATCH 1/2] powerpc/npu: Use flush_all_mm() instead of flush_tlb_mm() Alistair Popple
2017-09-05  3:57 ` Alistair Popple [this message]
2017-09-05  8:10   ` [PATCH 2/2] powerpc/powernv/npu: Don't explicitly flush nmmu tlb Frederic Barrat
2017-09-05 11:48     ` Alistair Popple
2017-09-08  4:36   ` kbuild test robot
  -- strict thread matches above, loose matches on Subject: below --
2017-08-11  6:22 [PATCH 1/2] powerpc/powernv/npu: Move tlb flush before launching ATSD Alistair Popple
2017-08-11  6:22 ` [PATCH 2/2] powerpc/powernv/npu: Don't explicitly flush nmmu tlb Alistair Popple
2017-08-13 17:04   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1504583864-8169-2-git-send-email-alistair@popple.id.au \
    --to=alistair@popple.id.au \
    --cc=andrew.donnellan@au1.ibm.com \
    --cc=arbab@linux.vnet.ibm.com \
    --cc=fbarrat@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).