From: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
To: linux-scsi@vger.kernel.org,
James Bottomley <jejb@linux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
"Matthew R. Ochs" <mrochs@linux.vnet.ibm.com>,
"Manoj N. Kumar" <manoj@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org,
Andrew Donnellan <andrew.donnellan@au1.ibm.com>,
Frederic Barrat <fbarrat@linux.vnet.ibm.com>,
Christophe Lombard <clombard@linux.vnet.ibm.com>
Subject: [PATCH 2/3] cxlflash: Allow cards without WWPN VPD to configure
Date: Wed, 25 Oct 2017 16:36:20 -0500 [thread overview]
Message-ID: <1508967380-54487-1-git-send-email-ukrishn@linux.vnet.ibm.com> (raw)
In-Reply-To: <1508967302-54403-1-git-send-email-ukrishn@linux.vnet.ibm.com>
From: "Matthew R. Ochs" <mrochs@linux.vnet.ibm.com>
Currently, all adapters that cxlflash supports must have WWPN VPD
keywords to complete configuration. This was required as cards with
external FC ports needed to be programmed with WWPNs.
Newer supported cards do not have an external FC interface and
therefore do not require WWPN. To support backwards compatibility,
these devices have included 'dummy' WWPN VPD with WWPN values of
zero. This however places a dependency that all future cards have
WWPN VPD, which may not always be the case.
Allow for cards to not have WWPN, designating which cards are
expected to have it in order to configure properly.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
---
drivers/scsi/cxlflash/main.c | 24 +++++++++++++++++-------
drivers/scsi/cxlflash/main.h | 3 ++-
2 files changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 76b8b7ee..6178028 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -1634,7 +1634,10 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
ssize_t vpd_size;
char vpd_data[CXLFLASH_VPD_LEN];
char tmp_buf[WWPN_BUF_LEN] = { 0 };
- char *wwpn_vpd_tags[MAX_FC_PORTS] = { "V5", "V6", "V7", "V8" };
+ const struct dev_dependent_vals *ddv = (struct dev_dependent_vals *)
+ cfg->dev_id->driver_data;
+ const bool wwpn_vpd_required = ddv->flags & CXLFLASH_WWPN_VPD_REQUIRED;
+ const char *wwpn_vpd_tags[MAX_FC_PORTS] = { "V5", "V6", "V7", "V8" };
/* Get the VPD data from the device */
vpd_size = cxl_read_adapter_vpd(pdev, vpd_data, sizeof(vpd_data));
@@ -1671,17 +1674,24 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
* value. Note that we must copy to a temporary buffer
* because the conversion service requires that the ASCII
* string be terminated.
+ *
+ * Allow for WWPN not being found for all devices, setting
+ * the returned WWPN to zero when not found. Notify with a
+ * log error for cards that should have had WWPN keywords
+ * in the VPD - cards requiring WWPN will not have their
+ * ports programmed and operate in an undefined state.
*/
for (k = 0; k < cfg->num_fc_ports; k++) {
j = ro_size;
i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
i = pci_vpd_find_info_keyword(vpd_data, i, j, wwpn_vpd_tags[k]);
- if (unlikely(i < 0)) {
- dev_err(dev, "%s: Port %d WWPN not found in VPD\n",
- __func__, k);
- rc = -ENODEV;
- goto out;
+ if (i < 0) {
+ if (wwpn_vpd_required)
+ dev_err(dev, "%s: Port %d WWPN not found\n",
+ __func__, k);
+ wwpn[k] = 0ULL;
+ continue;
}
j = pci_vpd_info_field_size(&vpd_data[i]);
@@ -3145,7 +3155,7 @@ static struct scsi_host_template driver_template = {
* Device dependent values
*/
static struct dev_dependent_vals dev_corsa_vals = { CXLFLASH_MAX_SECTORS,
- 0ULL };
+ CXLFLASH_WWPN_VPD_REQUIRED };
static struct dev_dependent_vals dev_flash_gt_vals = { CXLFLASH_MAX_SECTORS,
CXLFLASH_NOTIFY_SHUTDOWN };
static struct dev_dependent_vals dev_briard_vals = { CXLFLASH_MAX_SECTORS,
diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h
index 880e348..ba0108a 100644
--- a/drivers/scsi/cxlflash/main.h
+++ b/drivers/scsi/cxlflash/main.h
@@ -95,7 +95,8 @@ enum undo_level {
struct dev_dependent_vals {
u64 max_sectors;
u64 flags;
-#define CXLFLASH_NOTIFY_SHUTDOWN 0x0000000000000001ULL
+#define CXLFLASH_NOTIFY_SHUTDOWN 0x0000000000000001ULL
+#define CXLFLASH_WWPN_VPD_REQUIRED 0x0000000000000002ULL
};
struct asyc_intr_info {
--
2.1.0
next prev parent reply other threads:[~2017-10-25 21:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-25 21:35 [PATCH 0/3] cxlflash: Miscellaneous fixes Uma Krishnan
2017-10-25 21:35 ` [PATCH 1/3] cxlflash: Use derived maximum write same length Uma Krishnan
2017-10-25 21:36 ` Uma Krishnan [this message]
2017-10-25 21:36 ` [PATCH 3/3] cxlflash: Derive pid through accessors Uma Krishnan
2017-10-31 12:13 ` [PATCH 0/3] cxlflash: Miscellaneous fixes Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508967380-54487-1-git-send-email-ukrishn@linux.vnet.ibm.com \
--to=ukrishn@linux.vnet.ibm.com \
--cc=andrew.donnellan@au1.ibm.com \
--cc=clombard@linux.vnet.ibm.com \
--cc=fbarrat@linux.vnet.ibm.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=manoj@linux.vnet.ibm.com \
--cc=martin.petersen@oracle.com \
--cc=mrochs@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).