* SMC1 serial port blocks
@ 2006-06-29 21:29 tauanna
2006-06-30 6:34 ` Martin Krause
0 siblings, 1 reply; 3+ messages in thread
From: tauanna @ 2006-06-29 21:29 UTC (permalink / raw)
To: linuxppc-embedded
I have two identical linux boxes connected via a serial link (9600
bit/s without any handshaking). In both boxes the serial port is
realized by SMC1. One box is receiving and the other transmits a long
stream of bytes. If I start the receiver after the transmitter, it
seems that the transmitter cannot send anymore, even when I start the
receiver. The transmitter has to be restarted to solve the problem.
Any help is appreciated,
Anna
Hai voglia di fare un viaggio, ma non sai dove andare?
Scegli una delle nostre offerte HOTEL IN ITALIA E IN EUROPA da 50 euro.
Prenota subito su Expedia.it e... buona vacanza!
http://expedia.viaggi.tiscali.it/default.aspx?eapid=330-8
^ permalink raw reply [flat|nested] 3+ messages in thread
* SMC1 Serial port blocks
@ 2006-06-29 21:38 tauanna
0 siblings, 0 replies; 3+ messages in thread
From: tauanna @ 2006-06-29 21:38 UTC (permalink / raw)
To: linuxppc-embedded
I have two identical linux boxes connected via a serial link (9600
bit/s without any handshaking). In both boxes the serial port is
realized by SMC1. One box is receiving and the other transmits a long
stream of bytes. If I start the receiver after the transmitter, it
seems that the transmitter cannot send anymore, even when I start the
receiver. The transmitter has to be restarted to solve the problem.
Any help is appreciated,
Anna
Hai voglia di fare un viaggio, ma non sai dove andare?
Scegli una delle nostre offerte HOTEL IN ITALIA E IN EUROPA da 50 euro.
Prenota subito su Expedia.it e... buona vacanza!
http://expedia.viaggi.tiscali.it/default.aspx?eapid=330-8
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: SMC1 serial port blocks
2006-06-29 21:29 SMC1 serial " tauanna
@ 2006-06-30 6:34 ` Martin Krause
0 siblings, 0 replies; 3+ messages in thread
From: Martin Krause @ 2006-06-30 6:34 UTC (permalink / raw)
To: tauanna; +Cc: linuxppc-embedded
Hi,
linuxppc-embedded-bounces+martin.krause=3Dtqs.de@ozlabs.org wrote on
Thursday, June 29, 2006 11:30 PM:=20
> I have two identical linux boxes connected via a serial link (9600
> bit/s without any handshaking). In both boxes the serial port is
> realized by SMC1. One box is receiving and the other transmits a long
> stream of bytes. If I start the receiver after the transmitter, it
> seems that the transmitter cannot send anymore, even when I start the
> receiver. The transmitter has to be restarted to solve the problem.
Are you really sure, you don't use handshaking? You could try to connect
your boxes via three signal lines only: RxD, TxD and GND. This should
ensure that no (hardware) handshaking is involved.
Martin
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-06-30 6:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-29 21:38 SMC1 Serial port blocks tauanna
-- strict thread matches above, loose matches on Subject: below --
2006-06-29 21:29 SMC1 serial " tauanna
2006-06-30 6:34 ` Martin Krause
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).