* [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig
@ 2017-12-20 1:51 Benjamin Herrenschmidt
2017-12-20 1:59 ` Alexey Kardashevskiy
2018-01-17 13:30 ` Michael Ellerman
0 siblings, 2 replies; 6+ messages in thread
From: Benjamin Herrenschmidt @ 2017-12-20 1:51 UTC (permalink / raw)
To: linuxppc-dev
These adapters can be found in a number of our systems, so let's
enable the corresponding drivers by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
--- a/arch/powerpc/configs/powernv_defconfig 2017-12-19 18:37:24.803470591 -0600
+++ b/arch/powerpc/configs/powernv_defconfig 2017-12-19 19:47:57.931952417 -0600
@@ -97,6 +97,7 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_NVME=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_GENERIC=y
@@ -113,6 +114,7 @@
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
+CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig
2017-12-20 1:51 [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig Benjamin Herrenschmidt
@ 2017-12-20 1:59 ` Alexey Kardashevskiy
2017-12-20 2:14 ` Benjamin Herrenschmidt
2018-01-17 13:30 ` Michael Ellerman
1 sibling, 1 reply; 6+ messages in thread
From: Alexey Kardashevskiy @ 2017-12-20 1:59 UTC (permalink / raw)
To: Benjamin Herrenschmidt, linuxppc-dev
On 20/12/17 12:51, Benjamin Herrenschmidt wrote:
> These adapters can be found in a number of our systems, so let's
> enable the corresponding drivers by default.
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
> --- a/arch/powerpc/configs/powernv_defconfig 2017-12-19 18:37:24.803470591 -0600
> +++ b/arch/powerpc/configs/powernv_defconfig 2017-12-19 19:47:57.931952417 -0600
> @@ -97,6 +97,7 @@
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=65536
> CONFIG_VIRTIO_BLK=m
> +CONFIG_BLK_DEV_NVME=y
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_GENERIC=y
> @@ -113,6 +114,7 @@
> CONFIG_SCSI_CXGB4_ISCSI=m
> CONFIG_SCSI_BNX2_ISCSI=m
> CONFIG_BE2ISCSI=m
> +CONFIG_SCSI_AACRAID=y
> CONFIG_SCSI_MPT2SAS=m
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
>
"y", not "m"?
--
Alexey
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig
2017-12-20 1:59 ` Alexey Kardashevskiy
@ 2017-12-20 2:14 ` Benjamin Herrenschmidt
2017-12-23 0:40 ` Alexey Kardashevskiy
0 siblings, 1 reply; 6+ messages in thread
From: Benjamin Herrenschmidt @ 2017-12-20 2:14 UTC (permalink / raw)
To: Alexey Kardashevskiy, linuxppc-dev
On Wed, 2017-12-20 at 12:59 +1100, Alexey Kardashevskiy wrote:
> On 20/12/17 12:51, Benjamin Herrenschmidt wrote:
> > These adapters can be found in a number of our systems, so let's
> > enable the corresponding drivers by default.
> >
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > ---
> > --- a/arch/powerpc/configs/powernv_defconfig 2017-12-19 18:37:24.803470591 -0600
> > +++ b/arch/powerpc/configs/powernv_defconfig 2017-12-19 19:47:57.931952417 -0600
> > @@ -97,6 +97,7 @@
> > CONFIG_BLK_DEV_RAM=y
> > CONFIG_BLK_DEV_RAM_SIZE=65536
> > CONFIG_VIRTIO_BLK=m
> > +CONFIG_BLK_DEV_NVME=y
> > CONFIG_IDE=y
> > CONFIG_BLK_DEV_IDECD=y
> > CONFIG_BLK_DEV_GENERIC=y
> > @@ -113,6 +114,7 @@
> > CONFIG_SCSI_CXGB4_ISCSI=m
> > CONFIG_SCSI_BNX2_ISCSI=m
> > CONFIG_BE2ISCSI=m
> > +CONFIG_SCSI_AACRAID=y
> > CONFIG_SCSI_MPT2SAS=m
> > CONFIG_SCSI_SYM53C8XX_2=m
> > CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
> >
>
> "y", not "m"?
Yes. I like my boot devices to be "y"
Cheers,
Ben.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig
2017-12-20 2:14 ` Benjamin Herrenschmidt
@ 2017-12-23 0:40 ` Alexey Kardashevskiy
2017-12-23 5:08 ` Benjamin Herrenschmidt
0 siblings, 1 reply; 6+ messages in thread
From: Alexey Kardashevskiy @ 2017-12-23 0:40 UTC (permalink / raw)
To: Benjamin Herrenschmidt, linuxppc-dev
On 20/12/17 13:14, Benjamin Herrenschmidt wrote:
> On Wed, 2017-12-20 at 12:59 +1100, Alexey Kardashevskiy wrote:
>> On 20/12/17 12:51, Benjamin Herrenschmidt wrote:
>>> These adapters can be found in a number of our systems, so let's
>>> enable the corresponding drivers by default.
>>>
>>> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>>> ---
>>> --- a/arch/powerpc/configs/powernv_defconfig 2017-12-19 18:37:24.803470591 -0600
>>> +++ b/arch/powerpc/configs/powernv_defconfig 2017-12-19 19:47:57.931952417 -0600
>>> @@ -97,6 +97,7 @@
>>> CONFIG_BLK_DEV_RAM=y
>>> CONFIG_BLK_DEV_RAM_SIZE=65536
>>> CONFIG_VIRTIO_BLK=m
>>> +CONFIG_BLK_DEV_NVME=y
>>> CONFIG_IDE=y
>>> CONFIG_BLK_DEV_IDECD=y
>>> CONFIG_BLK_DEV_GENERIC=y
>>> @@ -113,6 +114,7 @@
>>> CONFIG_SCSI_CXGB4_ISCSI=m
>>> CONFIG_SCSI_BNX2_ISCSI=m
>>> CONFIG_BE2ISCSI=m
>>> +CONFIG_SCSI_AACRAID=y
>>> CONFIG_SCSI_MPT2SAS=m
>>> CONFIG_SCSI_SYM53C8XX_2=m
>>> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
>>>
>>
>> "y", not "m"?
>
> Yes. I like my boot devices to be "y"
Then rename it to powernv_benh_defconfig :) Everything else seems to cope
well with "m" - just look above.
--
Alexey
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig
2017-12-23 0:40 ` Alexey Kardashevskiy
@ 2017-12-23 5:08 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 6+ messages in thread
From: Benjamin Herrenschmidt @ 2017-12-23 5:08 UTC (permalink / raw)
To: Alexey Kardashevskiy, linuxppc-dev
On Sat, 2017-12-23 at 11:40 +1100, Alexey Kardashevskiy wrote:
> On 20/12/17 13:14, Benjamin Herrenschmidt wrote:
> > On Wed, 2017-12-20 at 12:59 +1100, Alexey Kardashevskiy wrote:
> > > On 20/12/17 12:51, Benjamin Herrenschmidt wrote:
> > > > These adapters can be found in a number of our systems, so let's
> > > > enable the corresponding drivers by default.
> > > >
> > > > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > > ---
> > > > --- a/arch/powerpc/configs/powernv_defconfig 2017-12-19 18:37:24.803470591 -0600
> > > > +++ b/arch/powerpc/configs/powernv_defconfig 2017-12-19 19:47:57.931952417 -0600
> > > > @@ -97,6 +97,7 @@
> > > > CONFIG_BLK_DEV_RAM=y
> > > > CONFIG_BLK_DEV_RAM_SIZE=65536
> > > > CONFIG_VIRTIO_BLK=m
> > > > +CONFIG_BLK_DEV_NVME=y
> > > > CONFIG_IDE=y
> > > > CONFIG_BLK_DEV_IDECD=y
> > > > CONFIG_BLK_DEV_GENERIC=y
> > > > @@ -113,6 +114,7 @@
> > > > CONFIG_SCSI_CXGB4_ISCSI=m
> > > > CONFIG_SCSI_BNX2_ISCSI=m
> > > > CONFIG_BE2ISCSI=m
> > > > +CONFIG_SCSI_AACRAID=y
> > > > CONFIG_SCSI_MPT2SAS=m
> > > > CONFIG_SCSI_SYM53C8XX_2=m
> > > > CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
> > > >
> > >
> > > "y", not "m"?
> >
> > Yes. I like my boot devices to be "y"
>
>
> Then rename it to powernv_benh_defconfig :) Everything else seems to cope
> well with "m" - just look above.
No. Most of the above aren't needed as boot devices on powernv systems.
If you look at IPR for example, it's Y not N.
Cheers,
Ben.
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: powerpc: Add aacraid and nvme to powernv_defconfig
2017-12-20 1:51 [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig Benjamin Herrenschmidt
2017-12-20 1:59 ` Alexey Kardashevskiy
@ 2018-01-17 13:30 ` Michael Ellerman
1 sibling, 0 replies; 6+ messages in thread
From: Michael Ellerman @ 2018-01-17 13:30 UTC (permalink / raw)
To: Benjamin Herrenschmidt, linuxppc-dev
On Wed, 2017-12-20 at 01:51:00 UTC, Benjamin Herrenschmidt wrote:
> These adapters can be found in a number of our systems, so let's
> enable the corresponding drivers by default.
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/bba9bc89b9e72bcf26632877b4823a
cheers
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-01-17 13:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-20 1:51 [PATCH] powerpc: Add aacraid and nvme to powernv_defconfig Benjamin Herrenschmidt
2017-12-20 1:59 ` Alexey Kardashevskiy
2017-12-20 2:14 ` Benjamin Herrenschmidt
2017-12-23 0:40 ` Alexey Kardashevskiy
2017-12-23 5:08 ` Benjamin Herrenschmidt
2018-01-17 13:30 ` Michael Ellerman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).