From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
To: mpe@ellerman.id.au
Cc: benh@kernel.crashing.org, anton@samba.org, paulus@samba.org,
npiggin@gmail.com, linuxppc-dev@lists.ozlabs.org,
Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Subject: [PATCH v10 16/17] powerpc: use generic atomic implementation for local_t
Date: Wed, 20 Dec 2017 09:25:56 +0530 [thread overview]
Message-ID: <1513742157-28768-17-git-send-email-maddy@linux.vnet.ibm.com> (raw)
In-Reply-To: <1513742157-28768-1-git-send-email-maddy@linux.vnet.ibm.com>
powerpc implements local_t with atomic operations. There is already
an asm-generic implementation which does this using atomic_t.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/local.h | 171 +--------------------------------------
1 file changed, 1 insertion(+), 170 deletions(-)
diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h
index 600a68bd77f5..cfbcc31d43ad 100644
--- a/arch/powerpc/include/asm/local.h
+++ b/arch/powerpc/include/asm/local.h
@@ -2,175 +2,6 @@
#ifndef _ARCH_POWERPC_LOCAL_H
#define _ARCH_POWERPC_LOCAL_H
-#include <linux/percpu.h>
-#include <linux/atomic.h>
-
-typedef struct
-{
- atomic_long_t a;
-} local_t;
-
-#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) }
-
-#define local_read(l) atomic_long_read(&(l)->a)
-#define local_set(l,i) atomic_long_set(&(l)->a, (i))
-
-#define local_add(i,l) atomic_long_add((i),(&(l)->a))
-#define local_sub(i,l) atomic_long_sub((i),(&(l)->a))
-#define local_inc(l) atomic_long_inc(&(l)->a)
-#define local_dec(l) atomic_long_dec(&(l)->a)
-
-static __inline__ long local_add_return(long a, local_t *l)
-{
- long t;
-
- __asm__ __volatile__(
-"1:" PPC_LLARX(%0,0,%2,0) " # local_add_return\n\
- add %0,%1,%0\n"
- PPC405_ERR77(0,%2)
- PPC_STLCX "%0,0,%2 \n\
- bne- 1b"
- : "=&r" (t)
- : "r" (a), "r" (&(l->a.counter))
- : "cc", "memory");
-
- return t;
-}
-
-#define local_add_negative(a, l) (local_add_return((a), (l)) < 0)
-
-static __inline__ long local_sub_return(long a, local_t *l)
-{
- long t;
-
- __asm__ __volatile__(
-"1:" PPC_LLARX(%0,0,%2,0) " # local_sub_return\n\
- subf %0,%1,%0\n"
- PPC405_ERR77(0,%2)
- PPC_STLCX "%0,0,%2 \n\
- bne- 1b"
- : "=&r" (t)
- : "r" (a), "r" (&(l->a.counter))
- : "cc", "memory");
-
- return t;
-}
-
-static __inline__ long local_inc_return(local_t *l)
-{
- long t;
-
- __asm__ __volatile__(
-"1:" PPC_LLARX(%0,0,%1,0) " # local_inc_return\n\
- addic %0,%0,1\n"
- PPC405_ERR77(0,%1)
- PPC_STLCX "%0,0,%1 \n\
- bne- 1b"
- : "=&r" (t)
- : "r" (&(l->a.counter))
- : "cc", "xer", "memory");
-
- return t;
-}
-
-/*
- * local_inc_and_test - increment and test
- * @l: pointer of type local_t
- *
- * Atomically increments @l by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define local_inc_and_test(l) (local_inc_return(l) == 0)
-
-static __inline__ long local_dec_return(local_t *l)
-{
- long t;
-
- __asm__ __volatile__(
-"1:" PPC_LLARX(%0,0,%1,0) " # local_dec_return\n\
- addic %0,%0,-1\n"
- PPC405_ERR77(0,%1)
- PPC_STLCX "%0,0,%1\n\
- bne- 1b"
- : "=&r" (t)
- : "r" (&(l->a.counter))
- : "cc", "xer", "memory");
-
- return t;
-}
-
-#define local_cmpxchg(l, o, n) \
- (cmpxchg_local(&((l)->a.counter), (o), (n)))
-#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
-
-/**
- * local_add_unless - add unless the number is a given value
- * @l: pointer of type local_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
- */
-static __inline__ int local_add_unless(local_t *l, long a, long u)
-{
- long t;
-
- __asm__ __volatile__ (
-"1:" PPC_LLARX(%0,0,%1,0) " # local_add_unless\n\
- cmpw 0,%0,%3 \n\
- beq- 2f \n\
- add %0,%2,%0 \n"
- PPC405_ERR77(0,%2)
- PPC_STLCX "%0,0,%1 \n\
- bne- 1b \n"
-" subf %0,%2,%0 \n\
-2:"
- : "=&r" (t)
- : "r" (&(l->a.counter)), "r" (a), "r" (u)
- : "cc", "memory");
-
- return t != u;
-}
-
-#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
-
-#define local_sub_and_test(a, l) (local_sub_return((a), (l)) == 0)
-#define local_dec_and_test(l) (local_dec_return((l)) == 0)
-
-/*
- * Atomically test *l and decrement if it is greater than 0.
- * The function returns the old value of *l minus 1.
- */
-static __inline__ long local_dec_if_positive(local_t *l)
-{
- long t;
-
- __asm__ __volatile__(
-"1:" PPC_LLARX(%0,0,%1,0) " # local_dec_if_positive\n\
- cmpwi %0,1\n\
- addi %0,%0,-1\n\
- blt- 2f\n"
- PPC405_ERR77(0,%1)
- PPC_STLCX "%0,0,%1\n\
- bne- 1b"
- "\n\
-2:" : "=&b" (t)
- : "r" (&(l->a.counter))
- : "cc", "memory");
-
- return t;
-}
-
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations. Note they take
- * a variable, not an address.
- */
-
-#define __local_inc(l) ((l)->a.counter++)
-#define __local_dec(l) ((l)->a.counter++)
-#define __local_add(i,l) ((l)->a.counter+=(i))
-#define __local_sub(i,l) ((l)->a.counter-=(i))
+#include <asm-generic/local.h>
#endif /* _ARCH_POWERPC_LOCAL_H */
--
2.7.4
next prev parent reply other threads:[~2017-12-20 3:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-20 3:55 [PATCH v10 00/17] powerpc: "paca->soft_enabled" based local atomic operation implementation Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 01/17] powerpc/64: do not trace irqs-off at interrupt return to soft-disabled context Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 02/17] powerpc/64: Add #defines for paca->soft_enabled flags Madhavan Srinivasan
2018-01-22 3:34 ` [v10, " Michael Ellerman
2017-12-20 3:55 ` [PATCH v10 03/17] powerpc/64: Improve inline asm in arch_local_irq_disable Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 04/17] powerpc/64: Fix arch_local_irq_disable() prototype Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 05/17] powerpc/64: move set_soft_enabled(), rename it, add memory clobber Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 06/17] powerpc/64: Implement and use soft_enabled_return API Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 07/17] powerpc/64: Implement and use soft_enabled_set_return API Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 08/17] powerpc/64: Cleanup hard_irq_disable() macro Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 09/17] powerpc/64: Change soft_enabled from flag to bitmask Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 10/17] powerpc/64: Rename soft_enabled to irq_soft_mask Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 11/17] powerpc/64s: Avoid using EXCEPTION_PROLOG_1 macro in MASKABLE_* Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 12/17] powerpc/64s: Add support to take additional parameter in MASKABLE_* macro Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 13/17] powerpc/64s: Add support to mask perf interrupts and replay them Madhavan Srinivasan
2018-01-15 13:23 ` Nicholas Piggin
2017-12-20 3:55 ` [PATCH v10 14/17] powerpc: Add new kconfig IRQ_DEBUG_SUPPORT Madhavan Srinivasan
2017-12-20 3:55 ` [PATCH v10 15/17] powerpc/64s: Add new set of irq_soft_mask_ functions for PMI masking Madhavan Srinivasan
2017-12-20 3:55 ` Madhavan Srinivasan [this message]
2017-12-20 3:55 ` [PATCH v10 17/17] powerpc/64s: Implement local_t using irq soft masking Madhavan Srinivasan
2017-12-20 5:02 ` [PATCH v10 00/17] powerpc: "paca->soft_enabled" based local atomic operation implementation Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513742157-28768-17-git-send-email-maddy@linux.vnet.ibm.com \
--to=maddy@linux.vnet.ibm.com \
--cc=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).