From: Nicolin Chen <nicoleotsuka@gmail.com>
To: timur@tabi.org, broonie@kernel.org, mail@maciej.szmigiero.name
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
alsa-devel@alsa-project.org, lgirdwood@gmail.com,
fabio.estevam@nxp.com, caleb@crome.org,
arnaud.mouiche@invoxia.com, lukma@denx.de, kernel@pengutronix.de
Subject: [PATCH v2 13/16] ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt()
Date: Wed, 10 Jan 2018 22:43:12 -0800 [thread overview]
Message-ID: <1515652995-15996-14-git-send-email-nicoleotsuka@gmail.com> (raw)
In-Reply-To: <1515652995-15996-1-git-send-email-nicoleotsuka@gmail.com>
The _fsl_ssi_set_dai_fmt() is a helper function being called from
fsl_ssi_set_dai_fmt() as an ASoC operation and fsl_ssi_hw_init()
mainly for AC97 format initialization.
This patch cleans the _fsl_ssi_set_dai_fmt() in following ways:
* Removing *dev pointer in the parameters as it's included in the
*ssi pointer of struct fsl_ssi.
* Using regmap_update_bits() instead of regmap_read() with masking
the value manually.
* Removing TXBIT0 configurations since this bit is set to 1 as its
reset value and there is no use case so far to unset it. And it
is safe to remove since regmap_update_bits() won't touch it.
* Moving baudclk check to the switch-case routine to skip the I2S
master check. And moving SxCCR.DC settings after baudclk check.
* Adding format settings for SND_SOC_DAIFMT_AC97 like others.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Caleb Crome <caleb@crome.org>
---
sound/soc/fsl/fsl_ssi.c | 70 ++++++++++++++++++++++---------------------------
1 file changed, 31 insertions(+), 39 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 178c192..213962a 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -855,42 +855,27 @@ static int fsl_ssi_hw_free(struct snd_pcm_substream *substream,
return 0;
}
-static int _fsl_ssi_set_dai_fmt(struct device *dev,
- struct fsl_ssi *ssi, unsigned int fmt)
+static int _fsl_ssi_set_dai_fmt(struct fsl_ssi *ssi, unsigned int fmt)
{
- struct regmap *regs = ssi->regs;
- u32 strcr = 0, stcr, srcr, scr, mask;
+ u32 strcr = 0, scr = 0, stcr, srcr, mask;
ssi->dai_fmt = fmt;
- if (fsl_ssi_is_i2s_master(ssi) && IS_ERR(ssi->baudclk)) {
- dev_err(dev, "missing baudclk for master mode\n");
- return -EINVAL;
- }
-
- regmap_read(regs, REG_SSI_SCR, &scr);
- scr &= ~(SSI_SCR_SYN | SSI_SCR_I2S_MODE_MASK);
/* Synchronize frame sync clock for TE to avoid data slipping */
scr |= SSI_SCR_SYNC_TX_FS;
- mask = SSI_STCR_TXBIT0 | SSI_STCR_TFDIR | SSI_STCR_TXDIR |
- SSI_STCR_TSCKP | SSI_STCR_TFSI | SSI_STCR_TFSL | SSI_STCR_TEFS;
- regmap_read(regs, REG_SSI_STCR, &stcr);
- regmap_read(regs, REG_SSI_SRCR, &srcr);
- stcr &= ~mask;
- srcr &= ~mask;
-
/* Use Network mode as default */
ssi->i2s_net = SSI_SCR_NET;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
- regmap_update_bits(regs, REG_SSI_STCCR,
- SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(2));
- regmap_update_bits(regs, REG_SSI_SRCCR,
- SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(2));
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFS:
case SND_SOC_DAIFMT_CBS_CFS:
+ if (IS_ERR(ssi->baudclk)) {
+ dev_err(ssi->dev,
+ "missing baudclk for master mode\n");
+ return -EINVAL;
+ }
ssi->i2s_net |= SSI_SCR_I2S_MODE_MASTER;
break;
case SND_SOC_DAIFMT_CBM_CFM:
@@ -900,30 +885,34 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
return -EINVAL;
}
+ regmap_update_bits(ssi->regs, REG_SSI_STCCR,
+ SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(2));
+ regmap_update_bits(ssi->regs, REG_SSI_SRCCR,
+ SSI_SxCCR_DC_MASK, SSI_SxCCR_DC(2));
+
/* Data on rising edge of bclk, frame low, 1clk before data */
- strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP |
- SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
+ strcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP | SSI_STCR_TEFS;
break;
case SND_SOC_DAIFMT_LEFT_J:
/* Data on rising edge of bclk, frame high */
- strcr |= SSI_STCR_TXBIT0 | SSI_STCR_TSCKP;
+ strcr |= SSI_STCR_TSCKP;
break;
case SND_SOC_DAIFMT_DSP_A:
/* Data on rising edge of bclk, frame high, 1clk before data */
- strcr |= SSI_STCR_TFSL | SSI_STCR_TSCKP |
- SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
+ strcr |= SSI_STCR_TFSL | SSI_STCR_TSCKP | SSI_STCR_TEFS;
break;
case SND_SOC_DAIFMT_DSP_B:
/* Data on rising edge of bclk, frame high */
- strcr |= SSI_STCR_TFSL | SSI_STCR_TSCKP | SSI_STCR_TXBIT0;
+ strcr |= SSI_STCR_TFSL | SSI_STCR_TSCKP;
break;
case SND_SOC_DAIFMT_AC97:
/* Data on falling edge of bclk, frame high, 1clk before data */
- ssi->i2s_net |= SSI_SCR_I2S_MODE_NORMAL;
+ strcr |= SSI_STCR_TEFS;
break;
default:
return -EINVAL;
}
+
scr |= ssi->i2s_net;
/* DAI clock inversion */
@@ -957,20 +946,17 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* Input bit or frame sync clocks */
- scr &= ~SSI_SCR_SYS_CLK_EN;
break;
case SND_SOC_DAIFMT_CBM_CFS:
/* Input bit clock but output frame sync clock */
- strcr &= ~SSI_STCR_TXDIR;
strcr |= SSI_STCR_TFDIR;
- scr &= ~SSI_SCR_SYS_CLK_EN;
break;
default:
return -EINVAL;
}
- stcr |= strcr;
- srcr |= strcr;
+ stcr = strcr;
+ srcr = strcr;
/* Set SYN mode and clear RXDIR bit when using SYN or AC97 mode */
if (ssi->cpu_dai_drv.symmetric_rates || fsl_ssi_is_ac97(ssi)) {
@@ -978,9 +964,15 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev,
scr |= SSI_SCR_SYN;
}
- regmap_write(regs, REG_SSI_STCR, stcr);
- regmap_write(regs, REG_SSI_SRCR, srcr);
- regmap_write(regs, REG_SSI_SCR, scr);
+ mask = SSI_STCR_TFDIR | SSI_STCR_TXDIR | SSI_STCR_TSCKP |
+ SSI_STCR_TFSI | SSI_STCR_TFSL | SSI_STCR_TEFS;
+
+ regmap_update_bits(ssi->regs, REG_SSI_STCR, mask, stcr);
+ regmap_update_bits(ssi->regs, REG_SSI_SRCR, mask, srcr);
+
+ mask = SSI_SCR_SYNC_TX_FS | SSI_SCR_I2S_MODE_MASK |
+ SSI_SCR_SYS_CLK_EN | SSI_SCR_SYN;
+ regmap_update_bits(ssi->regs, REG_SSI_SCR, mask, scr);
return 0;
}
@@ -996,7 +988,7 @@ static int fsl_ssi_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
if (fsl_ssi_is_ac97(ssi))
return 0;
- return _fsl_ssi_set_dai_fmt(dai->dev, ssi, fmt);
+ return _fsl_ssi_set_dai_fmt(ssi, fmt);
}
/**
@@ -1249,7 +1241,7 @@ static int fsl_ssi_hw_init(struct fsl_ssi *ssi)
/* AC97 should start earlier to communicate with CODECs */
if (fsl_ssi_is_ac97(ssi)) {
- _fsl_ssi_set_dai_fmt(ssi->dev, ssi, ssi->dai_fmt);
+ _fsl_ssi_set_dai_fmt(ssi, ssi->dai_fmt);
fsl_ssi_setup_ac97(ssi);
}
--
2.7.4
next prev parent reply other threads:[~2018-01-11 6:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-11 6:42 [PATCH v2 00/16] ASoC: fsl_ssi: Clean up - program flow level Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 01/16] ASoC: fsl_ssi: Keep ssi->i2s_net updated Nicolin Chen
2018-02-22 13:17 ` Applied "ASoC: fsl_ssi: Keep ssi->i2s_net updated" to the asoc tree Mark Brown
2018-01-11 6:43 ` [PATCH v2 02/16] ASoC: fsl_ssi: Clean up set_dai_tdm_slot() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 03/16] ASoC: fsl_ssi: Maintain a mask of active streams Nicolin Chen
2018-01-14 22:34 ` Maciej S. Szmigiero
2018-01-14 23:57 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 04/16] ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro Nicolin Chen
2018-01-14 22:34 ` Maciej S. Szmigiero
2018-01-15 0:03 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 05/16] ASoC: fsl_ssi: Clear FIFO directly in fsl_ssi_config() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 06/16] ASoC: fsl_ssi: Clean up helper functions of trigger() Nicolin Chen
2018-01-14 22:37 ` Maciej S. Szmigiero
2018-01-11 6:43 ` [PATCH v2 07/16] ASoC: fsl_ssi: Add DAIFMT define for AC97 Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 08/16] ASoC: fsl_ssi: Clean up fsl_ssi_setup_regvals() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 09/16] ASoC: fsl_ssi: Set xFEN0 and xFEN1 together Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 10/16] ASoC: fsl_ssi: Use snd_soc_init_dma_data instead Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 11/16] ASoC: fsl_ssi: Move one-time configurations to probe() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 12/16] ASoC: fsl_ssi: Setup AC97 in fsl_ssi_hw_init() Nicolin Chen
2018-01-11 6:43 ` Nicolin Chen [this message]
2018-01-14 22:40 ` [PATCH v2 13/16] ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt() Maciej S. Szmigiero
2018-01-15 0:11 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 14/16] ASoC: fsl_ssi: Remove cpu_dai_drv from fsl_ssi structure Nicolin Chen
2018-01-14 22:42 ` Maciej S. Szmigiero
2018-01-15 0:13 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 15/16] ASoC: fsl_ssi: Move DT related code to a separate probe() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 16/16] ASoC: fsl_ssi: Use ssi->streams instead of reading register Nicolin Chen
2018-02-22 13:16 ` Applied "ASoC: fsl_ssi: Use ssi->streams instead of reading register" to the asoc tree Mark Brown
2018-01-12 17:35 ` [PATCH v2 00/16] ASoC: fsl_ssi: Clean up - program flow level Caleb Crome
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515652995-15996-14-git-send-email-nicoleotsuka@gmail.com \
--to=nicoleotsuka@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnaud.mouiche@invoxia.com \
--cc=broonie@kernel.org \
--cc=caleb@crome.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukma@denx.de \
--cc=mail@maciej.szmigiero.name \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).