From: Nicolin Chen <nicoleotsuka@gmail.com>
To: timur@tabi.org, broonie@kernel.org, mail@maciej.szmigiero.name
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
alsa-devel@alsa-project.org, lgirdwood@gmail.com,
fabio.estevam@nxp.com, caleb@crome.org,
arnaud.mouiche@invoxia.com, lukma@denx.de, kernel@pengutronix.de
Subject: [PATCH v2 14/16] ASoC: fsl_ssi: Remove cpu_dai_drv from fsl_ssi structure
Date: Wed, 10 Jan 2018 22:43:13 -0800 [thread overview]
Message-ID: <1515652995-15996-15-git-send-email-nicoleotsuka@gmail.com> (raw)
In-Reply-To: <1515652995-15996-1-git-send-email-nicoleotsuka@gmail.com>
The cpu_dai_drv is only used for symmetric_rates. So this patch replaces
it with a synchronous boolean flag.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Caleb Crome <caleb@crome.org>
---
sound/soc/fsl/fsl_ssi.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 213962a..716603c 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -208,11 +208,11 @@ struct fsl_ssi_soc_data {
*
* @regs: Pointer to the regmap registers
* @irq: IRQ of this SSI
- * @cpu_dai_drv: CPU DAI driver for this device
*
* @dai_fmt: DAI configuration this device is currently used with
* @streams: Mask of current active streams: BIT(TX) and BIT(RX)
* @i2s_net: I2S and Network mode configurations of SCR register
+ * @synchronous: Use synchronous mode - both of TX and RX use STCK and SFCK
* @use_dma: DMA is used or FIQ with stream filter
* @use_dual_fifo: DMA with support for dual FIFO mode
* @has_ipg_clk_name: If "ipg" is in the clock name list of device tree
@@ -253,11 +253,11 @@ struct fsl_ssi_soc_data {
struct fsl_ssi {
struct regmap *regs;
int irq;
- struct snd_soc_dai_driver cpu_dai_drv;
unsigned int dai_fmt;
u8 streams;
u8 i2s_net;
+ bool synchronous;
bool use_dma;
bool use_dual_fifo;
bool has_ipg_clk_name;
@@ -668,7 +668,6 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
bool tx2, tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
struct fsl_ssi *ssi = snd_soc_dai_get_drvdata(dai);
struct regmap *regs = ssi->regs;
- int synchronous = ssi->cpu_dai_drv.symmetric_rates, ret;
u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
unsigned long clkrate, baudrate, tmprate;
unsigned int slots = params_channels(hw_params);
@@ -676,6 +675,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
u64 sub, savesub = 100000;
unsigned int freq;
bool baudclk_is_used;
+ int ret;
/* Override slots and slot_width if being specifically set... */
if (ssi->slots)
@@ -754,7 +754,7 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
mask = SSI_SxCCR_PM_MASK | SSI_SxCCR_DIV2 | SSI_SxCCR_PSR;
/* STCCR is used for RX in synchronous mode */
- tx2 = tx || synchronous;
+ tx2 = tx || ssi->synchronous;
regmap_update_bits(regs, REG_SSI_SxCCR(tx2), mask, stccr);
if (!baudclk_is_used) {
@@ -802,7 +802,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
* that should set separate configurations for STCCR and SRCCR
* despite running in the synchronous mode.
*/
- if (enabled && ssi->cpu_dai_drv.symmetric_rates)
+ if (enabled && ssi->synchronous)
return 0;
if (fsl_ssi_is_i2s_master(ssi)) {
@@ -834,7 +834,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
}
/* In synchronous mode, the SSI uses STCCR for capture */
- tx2 = tx || ssi->cpu_dai_drv.symmetric_rates;
+ tx2 = tx || ssi->synchronous;
regmap_update_bits(regs, REG_SSI_SxCCR(tx2), SSI_SxCCR_WL_MASK, wl);
return 0;
@@ -959,7 +959,7 @@ static int _fsl_ssi_set_dai_fmt(struct fsl_ssi *ssi, unsigned int fmt)
srcr = strcr;
/* Set SYN mode and clear RXDIR bit when using SYN or AC97 mode */
- if (ssi->cpu_dai_drv.symmetric_rates || fsl_ssi_is_ac97(ssi)) {
+ if (ssi->synchronous || fsl_ssi_is_ac97(ssi)) {
srcr &= ~SSI_SRCR_RXDIR;
scr |= SSI_SCR_SYN;
}
@@ -1360,6 +1360,7 @@ static void fsl_ssi_imx_clean(struct platform_device *pdev, struct fsl_ssi *ssi)
static int fsl_ssi_probe(struct platform_device *pdev)
{
+ struct snd_soc_dai_driver *cpu_dai_drv;
struct fsl_ssi *ssi;
int ret = 0;
struct device_node *np = pdev->dev.of_node;
@@ -1394,14 +1395,12 @@ static int fsl_ssi_probe(struct platform_device *pdev)
ssi->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter");
if (fsl_ssi_is_ac97(ssi)) {
- memcpy(&ssi->cpu_dai_drv, &fsl_ssi_ac97_dai,
- sizeof(fsl_ssi_ac97_dai));
+ cpu_dai_drv = &fsl_ssi_ac97_dai;
fsl_ac97_data = ssi;
} else {
- memcpy(&ssi->cpu_dai_drv, &fsl_ssi_dai_template,
- sizeof(fsl_ssi_dai_template));
+ cpu_dai_drv = &fsl_ssi_dai_template;
}
- ssi->cpu_dai_drv.name = dev_name(dev);
+ cpu_dai_drv->name = dev_name(dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iomem = devm_ioremap_resource(dev, res);
@@ -1439,11 +1438,12 @@ static int fsl_ssi_probe(struct platform_device *pdev)
/* Set software limitations for synchronous mode */
if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
if (!fsl_ssi_is_ac97(ssi)) {
- ssi->cpu_dai_drv.symmetric_rates = 1;
- ssi->cpu_dai_drv.symmetric_samplebits = 1;
+ cpu_dai_drv->symmetric_rates = 1;
+ cpu_dai_drv->symmetric_samplebits = 1;
+ ssi->synchronous = true;
}
- ssi->cpu_dai_drv.symmetric_channels = 1;
+ cpu_dai_drv->symmetric_channels = 1;
}
/* Fetch FIFO depth; Set to 8 for older DT without this property */
@@ -1498,7 +1498,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
}
ret = devm_snd_soc_register_component(dev, &fsl_ssi_component,
- &ssi->cpu_dai_drv, 1);
+ cpu_dai_drv, 1);
if (ret) {
dev_err(dev, "failed to register DAI: %d\n", ret);
goto error_asoc_register;
--
2.7.4
next prev parent reply other threads:[~2018-01-11 6:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-11 6:42 [PATCH v2 00/16] ASoC: fsl_ssi: Clean up - program flow level Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 01/16] ASoC: fsl_ssi: Keep ssi->i2s_net updated Nicolin Chen
2018-02-22 13:17 ` Applied "ASoC: fsl_ssi: Keep ssi->i2s_net updated" to the asoc tree Mark Brown
2018-01-11 6:43 ` [PATCH v2 02/16] ASoC: fsl_ssi: Clean up set_dai_tdm_slot() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 03/16] ASoC: fsl_ssi: Maintain a mask of active streams Nicolin Chen
2018-01-14 22:34 ` Maciej S. Szmigiero
2018-01-14 23:57 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 04/16] ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro Nicolin Chen
2018-01-14 22:34 ` Maciej S. Szmigiero
2018-01-15 0:03 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 05/16] ASoC: fsl_ssi: Clear FIFO directly in fsl_ssi_config() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 06/16] ASoC: fsl_ssi: Clean up helper functions of trigger() Nicolin Chen
2018-01-14 22:37 ` Maciej S. Szmigiero
2018-01-11 6:43 ` [PATCH v2 07/16] ASoC: fsl_ssi: Add DAIFMT define for AC97 Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 08/16] ASoC: fsl_ssi: Clean up fsl_ssi_setup_regvals() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 09/16] ASoC: fsl_ssi: Set xFEN0 and xFEN1 together Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 10/16] ASoC: fsl_ssi: Use snd_soc_init_dma_data instead Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 11/16] ASoC: fsl_ssi: Move one-time configurations to probe() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 12/16] ASoC: fsl_ssi: Setup AC97 in fsl_ssi_hw_init() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 13/16] ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt() Nicolin Chen
2018-01-14 22:40 ` Maciej S. Szmigiero
2018-01-15 0:11 ` Nicolin Chen
2018-01-11 6:43 ` Nicolin Chen [this message]
2018-01-14 22:42 ` [PATCH v2 14/16] ASoC: fsl_ssi: Remove cpu_dai_drv from fsl_ssi structure Maciej S. Szmigiero
2018-01-15 0:13 ` Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 15/16] ASoC: fsl_ssi: Move DT related code to a separate probe() Nicolin Chen
2018-01-11 6:43 ` [PATCH v2 16/16] ASoC: fsl_ssi: Use ssi->streams instead of reading register Nicolin Chen
2018-02-22 13:16 ` Applied "ASoC: fsl_ssi: Use ssi->streams instead of reading register" to the asoc tree Mark Brown
2018-01-12 17:35 ` [PATCH v2 00/16] ASoC: fsl_ssi: Clean up - program flow level Caleb Crome
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515652995-15996-15-git-send-email-nicoleotsuka@gmail.com \
--to=nicoleotsuka@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnaud.mouiche@invoxia.com \
--cc=broonie@kernel.org \
--cc=caleb@crome.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukma@denx.de \
--cc=mail@maciej.szmigiero.name \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).