linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: wei.guo.simon@gmail.com
To: linuxppc-dev@lists.ozlabs.org
Cc: Paul Mackerras <paulus@ozlabs.org>,
	kvm@vger.kernel.org, kvm-ppc@vger.kernel.org,
	Simon Guo <wei.guo.simon@gmail.com>
Subject: [PATCH 01/26] KVM: PPC: Book3S PR: Move kvmppc_save_tm/kvmppc_restore_tm to separate file
Date: Thu, 11 Jan 2018 18:11:14 +0800	[thread overview]
Message-ID: <1515665499-31710-2-git-send-email-wei.guo.simon@gmail.com> (raw)
In-Reply-To: <1515665499-31710-1-git-send-email-wei.guo.simon@gmail.com>

From: Simon Guo <wei.guo.simon@gmail.com>

It is a simple patch just for moving kvmppc_save_tm/kvmppc_restore_tm()
functionalities to tm.S. There is no logic change. The reconstruct of
those APIs will be done in later patches to improve readability.

It is for preparation of reusing those APIs on both HV/PR PPC KVM.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
---
 arch/powerpc/kvm/Makefile               |   3 +
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 239 ----------------------------
 arch/powerpc/kvm/tm.S                   | 267 ++++++++++++++++++++++++++++++++
 3 files changed, 270 insertions(+), 239 deletions(-)
 create mode 100644 arch/powerpc/kvm/tm.S

diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 85ba80d..3886f1b 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -63,6 +63,9 @@ kvm-pr-y := \
 	book3s_64_mmu.o \
 	book3s_32_mmu.o
 
+kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
+	tm.o
+
 ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
 kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
 	book3s_rmhandlers.o
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 2659844..a5c8ecd 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -39,8 +39,6 @@ BEGIN_FTR_SECTION;				\
 	extsw	reg, reg;			\
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
 
-#define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM)
-
 /* Values in HSTATE_NAPPING(r13) */
 #define NAPPING_CEDE	1
 #define NAPPING_NOVCPU	2
@@ -2951,243 +2949,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	mr	r4,r31
 	blr
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-/*
- * Save transactional state and TM-related registers.
- * Called with r9 pointing to the vcpu struct.
- * This can modify all checkpointed registers, but
- * restores r1, r2 and r9 (vcpu pointer) before exit.
- */
-kvmppc_save_tm:
-	mflr	r0
-	std	r0, PPC_LR_STKOFF(r1)
-
-	/* Turn on TM. */
-	mfmsr	r8
-	li	r0, 1
-	rldimi	r8, r0, MSR_TM_LG, 63-MSR_TM_LG
-	mtmsrd	r8
-
-	ld	r5, VCPU_MSR(r9)
-	rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
-	beq	1f	/* TM not active in guest. */
-
-	std	r1, HSTATE_HOST_R1(r13)
-	li	r3, TM_CAUSE_KVM_RESCHED
-
-	/* Clear the MSR RI since r1, r13 are all going to be foobar. */
-	li	r5, 0
-	mtmsrd	r5, 1
-
-	/* All GPRs are volatile at this point. */
-	TRECLAIM(R3)
-
-	/* Temporarily store r13 and r9 so we have some regs to play with */
-	SET_SCRATCH0(r13)
-	GET_PACA(r13)
-	std	r9, PACATMSCRATCH(r13)
-	ld	r9, HSTATE_KVM_VCPU(r13)
-
-	/* Get a few more GPRs free. */
-	std	r29, VCPU_GPRS_TM(29)(r9)
-	std	r30, VCPU_GPRS_TM(30)(r9)
-	std	r31, VCPU_GPRS_TM(31)(r9)
-
-	/* Save away PPR and DSCR soon so don't run with user values. */
-	mfspr	r31, SPRN_PPR
-	HMT_MEDIUM
-	mfspr	r30, SPRN_DSCR
-	ld	r29, HSTATE_DSCR(r13)
-	mtspr	SPRN_DSCR, r29
-
-	/* Save all but r9, r13 & r29-r31 */
-	reg = 0
-	.rept	29
-	.if (reg != 9) && (reg != 13)
-	std	reg, VCPU_GPRS_TM(reg)(r9)
-	.endif
-	reg = reg + 1
-	.endr
-	/* ... now save r13 */
-	GET_SCRATCH0(r4)
-	std	r4, VCPU_GPRS_TM(13)(r9)
-	/* ... and save r9 */
-	ld	r4, PACATMSCRATCH(r13)
-	std	r4, VCPU_GPRS_TM(9)(r9)
-
-	/* Reload stack pointer and TOC. */
-	ld	r1, HSTATE_HOST_R1(r13)
-	ld	r2, PACATOC(r13)
-
-	/* Set MSR RI now we have r1 and r13 back. */
-	li	r5, MSR_RI
-	mtmsrd	r5, 1
-
-	/* Save away checkpinted SPRs. */
-	std	r31, VCPU_PPR_TM(r9)
-	std	r30, VCPU_DSCR_TM(r9)
-	mflr	r5
-	mfcr	r6
-	mfctr	r7
-	mfspr	r8, SPRN_AMR
-	mfspr	r10, SPRN_TAR
-	mfxer	r11
-	std	r5, VCPU_LR_TM(r9)
-	stw	r6, VCPU_CR_TM(r9)
-	std	r7, VCPU_CTR_TM(r9)
-	std	r8, VCPU_AMR_TM(r9)
-	std	r10, VCPU_TAR_TM(r9)
-	std	r11, VCPU_XER_TM(r9)
-
-	/* Restore r12 as trap number. */
-	lwz	r12, VCPU_TRAP(r9)
-
-	/* Save FP/VSX. */
-	addi	r3, r9, VCPU_FPRS_TM
-	bl	store_fp_state
-	addi	r3, r9, VCPU_VRS_TM
-	bl	store_vr_state
-	mfspr	r6, SPRN_VRSAVE
-	stw	r6, VCPU_VRSAVE_TM(r9)
-1:
-	/*
-	 * We need to save these SPRs after the treclaim so that the software
-	 * error code is recorded correctly in the TEXASR.  Also the user may
-	 * change these outside of a transaction, so they must always be
-	 * context switched.
-	 */
-	mfspr	r5, SPRN_TFHAR
-	mfspr	r6, SPRN_TFIAR
-	mfspr	r7, SPRN_TEXASR
-	std	r5, VCPU_TFHAR(r9)
-	std	r6, VCPU_TFIAR(r9)
-	std	r7, VCPU_TEXASR(r9)
-
-	ld	r0, PPC_LR_STKOFF(r1)
-	mtlr	r0
-	blr
-
-/*
- * Restore transactional state and TM-related registers.
- * Called with r4 pointing to the vcpu struct.
- * This potentially modifies all checkpointed registers.
- * It restores r1, r2, r4 from the PACA.
- */
-kvmppc_restore_tm:
-	mflr	r0
-	std	r0, PPC_LR_STKOFF(r1)
-
-	/* Turn on TM/FP/VSX/VMX so we can restore them. */
-	mfmsr	r5
-	li	r6, MSR_TM >> 32
-	sldi	r6, r6, 32
-	or	r5, r5, r6
-	ori	r5, r5, MSR_FP
-	oris	r5, r5, (MSR_VEC | MSR_VSX)@h
-	mtmsrd	r5
-
-	/*
-	 * The user may change these outside of a transaction, so they must
-	 * always be context switched.
-	 */
-	ld	r5, VCPU_TFHAR(r4)
-	ld	r6, VCPU_TFIAR(r4)
-	ld	r7, VCPU_TEXASR(r4)
-	mtspr	SPRN_TFHAR, r5
-	mtspr	SPRN_TFIAR, r6
-	mtspr	SPRN_TEXASR, r7
-
-	ld	r5, VCPU_MSR(r4)
-	rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
-	beqlr		/* TM not active in guest */
-	std	r1, HSTATE_HOST_R1(r13)
-
-	/* Make sure the failure summary is set, otherwise we'll program check
-	 * when we trechkpt.  It's possible that this might have been not set
-	 * on a kvmppc_set_one_reg() call but we shouldn't let this crash the
-	 * host.
-	 */
-	oris	r7, r7, (TEXASR_FS)@h
-	mtspr	SPRN_TEXASR, r7
-
-	/*
-	 * We need to load up the checkpointed state for the guest.
-	 * We need to do this early as it will blow away any GPRs, VSRs and
-	 * some SPRs.
-	 */
-
-	mr	r31, r4
-	addi	r3, r31, VCPU_FPRS_TM
-	bl	load_fp_state
-	addi	r3, r31, VCPU_VRS_TM
-	bl	load_vr_state
-	mr	r4, r31
-	lwz	r7, VCPU_VRSAVE_TM(r4)
-	mtspr	SPRN_VRSAVE, r7
-
-	ld	r5, VCPU_LR_TM(r4)
-	lwz	r6, VCPU_CR_TM(r4)
-	ld	r7, VCPU_CTR_TM(r4)
-	ld	r8, VCPU_AMR_TM(r4)
-	ld	r9, VCPU_TAR_TM(r4)
-	ld	r10, VCPU_XER_TM(r4)
-	mtlr	r5
-	mtcr	r6
-	mtctr	r7
-	mtspr	SPRN_AMR, r8
-	mtspr	SPRN_TAR, r9
-	mtxer	r10
-
-	/*
-	 * Load up PPR and DSCR values but don't put them in the actual SPRs
-	 * till the last moment to avoid running with userspace PPR and DSCR for
-	 * too long.
-	 */
-	ld	r29, VCPU_DSCR_TM(r4)
-	ld	r30, VCPU_PPR_TM(r4)
-
-	std	r2, PACATMSCRATCH(r13) /* Save TOC */
-
-	/* Clear the MSR RI since r1, r13 are all going to be foobar. */
-	li	r5, 0
-	mtmsrd	r5, 1
-
-	/* Load GPRs r0-r28 */
-	reg = 0
-	.rept	29
-	ld	reg, VCPU_GPRS_TM(reg)(r31)
-	reg = reg + 1
-	.endr
-
-	mtspr	SPRN_DSCR, r29
-	mtspr	SPRN_PPR, r30
-
-	/* Load final GPRs */
-	ld	29, VCPU_GPRS_TM(29)(r31)
-	ld	30, VCPU_GPRS_TM(30)(r31)
-	ld	31, VCPU_GPRS_TM(31)(r31)
-
-	/* TM checkpointed state is now setup.  All GPRs are now volatile. */
-	TRECHKPT
-
-	/* Now let's get back the state we need. */
-	HMT_MEDIUM
-	GET_PACA(r13)
-	ld	r29, HSTATE_DSCR(r13)
-	mtspr	SPRN_DSCR, r29
-	ld	r4, HSTATE_KVM_VCPU(r13)
-	ld	r1, HSTATE_HOST_R1(r13)
-	ld	r2, PACATMSCRATCH(r13)
-
-	/* Set the MSR RI since we have our registers back. */
-	li	r5, MSR_RI
-	mtmsrd	r5, 1
-
-	ld	r0, PPC_LR_STKOFF(r1)
-	mtlr	r0
-	blr
-#endif
-
 /*
  * We come here if we get any exception or interrupt while we are
  * executing host real mode code while in guest MMU context.
diff --git a/arch/powerpc/kvm/tm.S b/arch/powerpc/kvm/tm.S
new file mode 100644
index 0000000..072d35e
--- /dev/null
+++ b/arch/powerpc/kvm/tm.S
@@ -0,0 +1,267 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Derived from book3s_hv_rmhandlers.S,  which are:
+ *
+ * Copyright 2011 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ */
+
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/tm.h>
+#include <asm/cputable.h>
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+#define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM)
+#endif
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+/*
+ * Save transactional state and TM-related registers.
+ * Called with r9 pointing to the vcpu struct.
+ * This can modify all checkpointed registers, but
+ * restores r1, r2 and r9 (vcpu pointer) before exit.
+ */
+_GLOBAL(kvmppc_save_tm)
+	mflr	r0
+	std	r0, PPC_LR_STKOFF(r1)
+
+	/* Turn on TM. */
+	mfmsr	r8
+	li	r0, 1
+	rldimi	r8, r0, MSR_TM_LG, 63-MSR_TM_LG
+	mtmsrd	r8
+
+	ld	r5, VCPU_MSR(r9)
+	rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
+	beq	1f	/* TM not active in guest. */
+
+	std	r1, HSTATE_HOST_R1(r13)
+	li	r3, TM_CAUSE_KVM_RESCHED
+
+	/* Clear the MSR RI since r1, r13 are all going to be foobar. */
+	li	r5, 0
+	mtmsrd	r5, 1
+
+	/* All GPRs are volatile at this point. */
+	TRECLAIM(R3)
+
+	/* Temporarily store r13 and r9 so we have some regs to play with */
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
+	std	r9, PACATMSCRATCH(r13)
+	ld	r9, HSTATE_KVM_VCPU(r13)
+
+	/* Get a few more GPRs free. */
+	std	r29, VCPU_GPRS_TM(29)(r9)
+	std	r30, VCPU_GPRS_TM(30)(r9)
+	std	r31, VCPU_GPRS_TM(31)(r9)
+
+	/* Save away PPR and DSCR soon so don't run with user values. */
+	mfspr	r31, SPRN_PPR
+	HMT_MEDIUM
+	mfspr	r30, SPRN_DSCR
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	ld	r29, HSTATE_DSCR(r13)
+	mtspr	SPRN_DSCR, r29
+#endif
+
+	/* Save all but r9, r13 & r29-r31 */
+	reg = 0
+	.rept	29
+	.if (reg != 9) && (reg != 13)
+	std	reg, VCPU_GPRS_TM(reg)(r9)
+	.endif
+	reg = reg + 1
+	.endr
+	/* ... now save r13 */
+	GET_SCRATCH0(r4)
+	std	r4, VCPU_GPRS_TM(13)(r9)
+	/* ... and save r9 */
+	ld	r4, PACATMSCRATCH(r13)
+	std	r4, VCPU_GPRS_TM(9)(r9)
+
+	/* Reload stack pointer and TOC. */
+	ld	r1, HSTATE_HOST_R1(r13)
+	ld	r2, PACATOC(r13)
+
+	/* Set MSR RI now we have r1 and r13 back. */
+	li	r5, MSR_RI
+	mtmsrd	r5, 1
+
+	/* Save away checkpinted SPRs. */
+	std	r31, VCPU_PPR_TM(r9)
+	std	r30, VCPU_DSCR_TM(r9)
+	mflr	r5
+	mfcr	r6
+	mfctr	r7
+	mfspr	r8, SPRN_AMR
+	mfspr	r10, SPRN_TAR
+	mfxer	r11
+	std	r5, VCPU_LR_TM(r9)
+	stw	r6, VCPU_CR_TM(r9)
+	std	r7, VCPU_CTR_TM(r9)
+	std	r8, VCPU_AMR_TM(r9)
+	std	r10, VCPU_TAR_TM(r9)
+	std	r11, VCPU_XER_TM(r9)
+
+	/* Restore r12 as trap number. */
+	lwz	r12, VCPU_TRAP(r9)
+
+	/* Save FP/VSX. */
+	addi	r3, r9, VCPU_FPRS_TM
+	bl	store_fp_state
+	addi	r3, r9, VCPU_VRS_TM
+	bl	store_vr_state
+	mfspr	r6, SPRN_VRSAVE
+	stw	r6, VCPU_VRSAVE_TM(r9)
+1:
+	/*
+	 * We need to save these SPRs after the treclaim so that the software
+	 * error code is recorded correctly in the TEXASR.  Also the user may
+	 * change these outside of a transaction, so they must always be
+	 * context switched.
+	 */
+	mfspr	r5, SPRN_TFHAR
+	mfspr	r6, SPRN_TFIAR
+	mfspr	r7, SPRN_TEXASR
+	std	r5, VCPU_TFHAR(r9)
+	std	r6, VCPU_TFIAR(r9)
+	std	r7, VCPU_TEXASR(r9)
+
+	ld	r0, PPC_LR_STKOFF(r1)
+	mtlr	r0
+	blr
+
+/*
+ * Restore transactional state and TM-related registers.
+ * Called with r4 pointing to the vcpu struct.
+ * This potentially modifies all checkpointed registers.
+ * It restores r1, r2, r4 from the PACA.
+ */
+_GLOBAL(kvmppc_restore_tm)
+	mflr	r0
+	std	r0, PPC_LR_STKOFF(r1)
+
+	/* Turn on TM/FP/VSX/VMX so we can restore them. */
+	mfmsr	r5
+	li	r6, MSR_TM >> 32
+	sldi	r6, r6, 32
+	or	r5, r5, r6
+	ori	r5, r5, MSR_FP
+	oris	r5, r5, (MSR_VEC | MSR_VSX)@h
+	mtmsrd	r5
+
+	/*
+	 * The user may change these outside of a transaction, so they must
+	 * always be context switched.
+	 */
+	ld	r5, VCPU_TFHAR(r4)
+	ld	r6, VCPU_TFIAR(r4)
+	ld	r7, VCPU_TEXASR(r4)
+	mtspr	SPRN_TFHAR, r5
+	mtspr	SPRN_TFIAR, r6
+	mtspr	SPRN_TEXASR, r7
+
+	ld	r5, VCPU_MSR(r4)
+	rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
+	beqlr		/* TM not active in guest */
+	std	r1, HSTATE_HOST_R1(r13)
+
+	/* Make sure the failure summary is set, otherwise we'll program check
+	 * when we trechkpt.  It's possible that this might have been not set
+	 * on a kvmppc_set_one_reg() call but we shouldn't let this crash the
+	 * host.
+	 */
+	oris	r7, r7, (TEXASR_FS)@h
+	mtspr	SPRN_TEXASR, r7
+
+	/*
+	 * We need to load up the checkpointed state for the guest.
+	 * We need to do this early as it will blow away any GPRs, VSRs and
+	 * some SPRs.
+	 */
+
+	mr	r31, r4
+	addi	r3, r31, VCPU_FPRS_TM
+	bl	load_fp_state
+	addi	r3, r31, VCPU_VRS_TM
+	bl	load_vr_state
+	mr	r4, r31
+	lwz	r7, VCPU_VRSAVE_TM(r4)
+	mtspr	SPRN_VRSAVE, r7
+
+	ld	r5, VCPU_LR_TM(r4)
+	lwz	r6, VCPU_CR_TM(r4)
+	ld	r7, VCPU_CTR_TM(r4)
+	ld	r8, VCPU_AMR_TM(r4)
+	ld	r9, VCPU_TAR_TM(r4)
+	ld	r10, VCPU_XER_TM(r4)
+	mtlr	r5
+	mtcr	r6
+	mtctr	r7
+	mtspr	SPRN_AMR, r8
+	mtspr	SPRN_TAR, r9
+	mtxer	r10
+
+	/*
+	 * Load up PPR and DSCR values but don't put them in the actual SPRs
+	 * till the last moment to avoid running with userspace PPR and DSCR for
+	 * too long.
+	 */
+	ld	r29, VCPU_DSCR_TM(r4)
+	ld	r30, VCPU_PPR_TM(r4)
+
+	std	r2, PACATMSCRATCH(r13) /* Save TOC */
+
+	/* Clear the MSR RI since r1, r13 are all going to be foobar. */
+	li	r5, 0
+	mtmsrd	r5, 1
+
+	/* Load GPRs r0-r28 */
+	reg = 0
+	.rept	29
+	ld	reg, VCPU_GPRS_TM(reg)(r31)
+	reg = reg + 1
+	.endr
+
+	mtspr	SPRN_DSCR, r29
+	mtspr	SPRN_PPR, r30
+
+	/* Load final GPRs */
+	ld	29, VCPU_GPRS_TM(29)(r31)
+	ld	30, VCPU_GPRS_TM(30)(r31)
+	ld	31, VCPU_GPRS_TM(31)(r31)
+
+	/* TM checkpointed state is now setup.  All GPRs are now volatile. */
+	TRECHKPT
+
+	/* Now let's get back the state we need. */
+	HMT_MEDIUM
+	GET_PACA(r13)
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	ld	r29, HSTATE_DSCR(r13)
+	mtspr	SPRN_DSCR, r29
+#endif
+	ld	r4, HSTATE_KVM_VCPU(r13)
+	ld	r1, HSTATE_HOST_R1(r13)
+	ld	r2, PACATMSCRATCH(r13)
+
+	/* Set the MSR RI since we have our registers back. */
+	li	r5, MSR_RI
+	mtmsrd	r5, 1
+
+	ld	r0, PPC_LR_STKOFF(r1)
+	mtlr	r0
+	blr
+#endif
-- 
1.8.3.1

  reply	other threads:[~2018-01-11 10:11 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-11 10:11 [PATCH 00/26] KVM: PPC: Book3S PR: Transaction memory support on PR KVM wei.guo.simon
2018-01-11 10:11 ` wei.guo.simon [this message]
2018-01-11 10:11 ` [PATCH 02/26] KVM: PPC: Book3S PR: add new parameter (guest MSR) for kvmppc_save_tm()/kvmppc_restore_tm() wei.guo.simon
2018-01-23  5:42   ` Paul Mackerras
2018-01-30  2:33     ` Simon Guo
2018-01-11 10:11 ` [PATCH 03/26] KVM: PPC: Book3S PR: turn on FP/VSX/VMX MSR bits in kvmppc_save_tm() wei.guo.simon
2018-01-11 10:11 ` [PATCH 04/26] KVM: PPC: Book3S PR: add C function wrapper for _kvmppc_save/restore_tm() wei.guo.simon
2018-01-23  5:49   ` Paul Mackerras
2018-01-30  2:38     ` Simon Guo
2018-01-11 10:11 ` [PATCH 05/26] KVM: PPC: Book3S PR: In PR KVM suspends Transactional state when inject an interrupt wei.guo.simon
2018-01-11 10:11 ` [PATCH 06/26] KVM: PPC: Book3S PR: PR KVM pass through MSR TM/TS bits to shadow_msr wei.guo.simon
2018-01-11 10:11 ` [PATCH 07/26] KVM: PPC: Book3S PR: add TEXASR related macros wei.guo.simon
2018-01-23  5:50   ` Paul Mackerras
2018-01-11 10:11 ` [PATCH 08/26] KVM: PPC: Book3S PR: Sync TM bits to shadow msr for problem state guest wei.guo.simon
2018-01-11 10:11 ` [PATCH 09/26] KVM: PPC: Book3S PR: implement RFID TM behavior to suppress change from S0 to N0 wei.guo.simon
2018-01-11 10:11 ` [PATCH 10/26] KVM: PPC: Book3S PR: set MSR HV bit accordingly for PPC970 and others wei.guo.simon
2018-01-23  5:51   ` Paul Mackerras
2018-01-11 10:11 ` [PATCH 11/26] KVM: PPC: Book3S PR: prevent TS bits change in kvmppc_interrupt_pr() wei.guo.simon
2018-01-11 10:11 ` [PATCH 12/26] powerpc: export symbol msr_check_and_set() wei.guo.simon
2018-01-11 10:11 ` [PATCH 13/26] KVM: PPC: Book3S PR: adds new kvmppc_copyto_vcpu_tm/kvmppc_copyfrom_vcpu_tm API for PR KVM wei.guo.simon
2018-01-23  5:52   ` Paul Mackerras
2018-01-30  2:15     ` Simon Guo
2018-01-11 10:11 ` [PATCH 14/26] KVM: PPC: Book3S PR: export tm_enable()/tm_disable/tm_abort() APIs wei.guo.simon
2018-01-11 10:11 ` [PATCH 15/26] KVM: PPC: Book3S PR: add kvmppc_save/restore_tm_sprs() APIs wei.guo.simon
2018-01-11 10:11 ` [PATCH 16/26] KVM: PPC: Book3S PR: add transaction memory save/restore skeleton for PR KVM wei.guo.simon
2018-01-23  6:04   ` Paul Mackerras
2018-01-30  2:57     ` Simon Guo
2018-01-11 10:11 ` [PATCH 17/26] KVM: PPC: Book3S PR: add math support for PR KVM HTM wei.guo.simon
2018-01-23  7:29   ` Paul Mackerras
2018-01-30  3:00     ` Simon Guo
2018-01-11 10:11 ` [PATCH 18/26] KVM: PPC: Book3S PR: make mtspr/mfspr emulation behavior based on active TM SPRs wei.guo.simon
2018-01-23  8:17   ` Paul Mackerras
2018-01-30  3:02     ` Simon Guo
2018-01-11 10:11 ` [PATCH 19/26] KVM: PPC: Book3S PR: always fail transaction in guest privilege state wei.guo.simon
2018-01-23  8:30   ` Paul Mackerras
2018-01-30  3:11     ` Simon Guo
2018-01-11 10:11 ` [PATCH 20/26] KVM: PPC: Book3S PR: enable NV reg restore for reading TM SPR at " wei.guo.simon
2018-01-23  9:08   ` Paul Mackerras
2018-01-11 10:11 ` [PATCH 21/26] KVM: PPC: Book3S PR: adds emulation for treclaim wei.guo.simon
2018-01-23  9:23   ` Paul Mackerras
2018-01-30  3:18     ` Simon Guo
2018-01-11 10:11 ` [PATCH 22/26] KVM: PPC: Book3S PR: add emulation for trechkpt in PR KVM wei.guo.simon
2018-01-23  9:36   ` Paul Mackerras
2018-01-30  3:13     ` Simon Guo
2018-01-11 10:11 ` [PATCH 23/26] KVM: PPC: Book3S PR: add emulation for tabort. for privilege guest wei.guo.simon
2018-01-23  9:44   ` Paul Mackerras
2018-01-30  3:24     ` Simon Guo
2018-01-11 10:11 ` [PATCH 24/26] KVM: PPC: Book3S PR: add guard code to prevent returning to guest with PR=0 and Transactional state wei.guo.simon
2018-01-11 10:11 ` [PATCH 25/26] KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM wei.guo.simon
2018-01-24  4:02   ` Paul Mackerras
2018-01-30  3:26     ` Simon Guo
2018-01-11 10:11 ` [PATCH 26/26] KVM: PPC: Book3S PR: enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl wei.guo.simon
2018-01-11 13:56 ` [PATCH 00/26] KVM: PPC: Book3S PR: Transaction memory support on PR KVM Gustavo Romero
2018-01-11 22:04   ` Benjamin Herrenschmidt
2018-01-12  2:41   ` Simon Guo
2018-01-23  5:38 ` Paul Mackerras
2018-01-23  7:16   ` Paul Mackerras
2018-01-27 13:10   ` Simon Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515665499-31710-2-git-send-email-wei.guo.simon@gmail.com \
    --to=wei.guo.simon@gmail.com \
    --cc=kvm-ppc@vger.kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=paulus@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).