From: Nicolin Chen <nicoleotsuka@gmail.com>
To: timur@tabi.org, broonie@kernel.org, mail@maciej.szmigiero.name
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
alsa-devel@alsa-project.org, lgirdwood@gmail.com,
fabio.estevam@nxp.com, caleb@crome.org,
arnaud.mouiche@invoxia.com, lukma@denx.de, kernel@pengutronix.de
Subject: [PATCH v4 04/17] ASoC: fsl_ssi: Maintain a mask of active streams
Date: Mon, 15 Jan 2018 15:16:19 -0800 [thread overview]
Message-ID: <1516058192-65519-5-git-send-email-nicoleotsuka@gmail.com> (raw)
In-Reply-To: <1516058192-65519-1-git-send-email-nicoleotsuka@gmail.com>
Checking TE and RE bits in SCR register doesn't work for AC97 mode
which enables SSIEN, TE and RE in the fsl_ssi_setup_ac97() that's
called during probe().
So when running into the trigger(), it will always get the result
of both TE and RE being enabled already, even if actually there is
no active stream.
This patch fixes this issue by adding a variable to log the active
streams manually.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Caleb Crome <caleb@crome.org>
---
Changelog
v3
* Replaced "bool dir" with "int dir"
v2
* Replaced bool tx with bool dir
sound/soc/fsl/fsl_ssi.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 8984ee2..51e7405 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -205,6 +205,7 @@ struct fsl_ssi_soc_data {
* @cpu_dai_drv: CPU DAI driver for this device
*
* @dai_fmt: DAI configuration this device is currently used with
+ * @streams: Mask of current active streams: BIT(TX) and BIT(RX)
* @i2s_net: I2S and Network mode configurations of SCR register
* @use_dma: DMA is used or FIQ with stream filter
* @use_dual_fifo: DMA with support for dual FIFO mode
@@ -249,6 +250,7 @@ struct fsl_ssi {
struct snd_soc_dai_driver cpu_dai_drv;
unsigned int dai_fmt;
+ u8 streams;
u8 i2s_net;
bool use_dma;
bool use_dual_fifo;
@@ -444,15 +446,14 @@ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx)
static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
struct fsl_ssi_regvals *vals)
{
+ int dir = (&ssi->regvals[TX] == vals) ? TX : RX;
struct regmap *regs = ssi->regs;
struct fsl_ssi_regvals *avals;
int nr_active_streams;
- u32 scr;
int keep_active;
- regmap_read(regs, REG_SSI_SCR, &scr);
-
- nr_active_streams = !!(scr & SSI_SCR_TE) + !!(scr & SSI_SCR_RE);
+ nr_active_streams = !!(ssi->streams & BIT(TX)) +
+ !!(ssi->streams & BIT(RX));
if (nr_active_streams - 1 > 0)
keep_active = 1;
@@ -474,6 +475,9 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
keep_active);
/* Safely disable SCR register for the stream */
regmap_update_bits(regs, REG_SSI_SCR, scr, 0);
+
+ /* Log the disabled stream to the mask */
+ ssi->streams &= ~BIT(dir);
}
/*
@@ -549,6 +553,9 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
}
/* Enable all remaining bits */
regmap_update_bits(regs, REG_SSI_SCR, vals->scr, vals->scr);
+
+ /* Log the enabled stream to the mask */
+ ssi->streams |= BIT(dir);
}
}
--
2.7.4
next prev parent reply other threads:[~2018-01-15 23:17 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-15 23:16 [PATCH v4 00/17] ASoC: fsl_ssi: Clean up - program flow level Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 01/17] ASoC: fsl_ssi: Redefine RX and TX macros Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 02/17] ASoC: fsl_ssi: Keep ssi->i2s_net updated Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 03/17] ASoC: fsl_ssi: Clean up set_dai_tdm_slot() Nicolin Chen
2018-01-15 23:16 ` Nicolin Chen [this message]
2018-01-15 23:16 ` [PATCH v4 05/17] ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 06/17] ASoC: fsl_ssi: Clear FIFO directly in fsl_ssi_config() Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 07/17] ASoC: fsl_ssi: Clean up helper functions of trigger() Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 08/17] ASoC: fsl_ssi: Add DAIFMT define for AC97 Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 09/17] ASoC: fsl_ssi: Clean up fsl_ssi_setup_regvals() Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 10/17] ASoC: fsl_ssi: Set xFEN0 and xFEN1 together Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 11/17] ASoC: fsl_ssi: Use snd_soc_init_dma_data instead Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 12/17] ASoC: fsl_ssi: Move one-time configurations to probe() Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 13/17] ASoC: fsl_ssi: Setup AC97 in fsl_ssi_hw_init() Nicolin Chen
2018-01-16 23:39 ` Maciej S. Szmigiero
2018-01-15 23:16 ` [PATCH v4 14/17] ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt() Nicolin Chen
2018-02-22 13:16 ` Applied "ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt()" to the asoc tree Mark Brown
2018-01-15 23:16 ` [PATCH v4 15/17] ASoC: fsl_ssi: Add bool synchronous to mark synchronous mode Nicolin Chen
2018-01-15 23:16 ` [PATCH v4 16/17] ASoC: fsl_ssi: Move DT related code to a separate probe() Nicolin Chen
2018-01-16 23:39 ` Maciej S. Szmigiero
2018-01-15 23:16 ` [PATCH v4 17/17] ASoC: fsl_ssi: Use ssi->streams instead of reading register Nicolin Chen
2018-01-16 21:26 ` [PATCH v4 00/17] ASoC: fsl_ssi: Clean up - program flow level Caleb Crome
2018-01-16 23:38 ` Maciej S. Szmigiero
2018-01-16 23:52 ` Nicolin Chen
2018-01-17 0:11 ` Maciej S. Szmigiero
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516058192-65519-5-git-send-email-nicoleotsuka@gmail.com \
--to=nicoleotsuka@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnaud.mouiche@invoxia.com \
--cc=broonie@kernel.org \
--cc=caleb@crome.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukma@denx.de \
--cc=mail@maciej.szmigiero.name \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).