* rootfs problem kernel 2.6 XUPV2P
@ 2008-01-30 13:34 greenlean
0 siblings, 0 replies; only message in thread
From: greenlean @ 2008-01-30 13:34 UTC (permalink / raw)
To: linuxppc-embedded
Hi all, I'm having some problems with the rootfs:
If I use an initial ram disk, such as the initramfs from ELDK4.1 to build
an zImage.ielf file, I've got this log:
It looks like no image have been loaded!!! I have supplied a directory,
where I''ve mounted the EDLK ramdisk image, to the kernel and let him to
build the ramdisk (to avoid mistakes):
loaded at: 00400000 006691A0 =
=20
board data at: 00667124 006671A0 =
=20
relocated to: 004040A8 00404124 <-- I think that here
should be line showing the direction where the =
=20
zimage at: 00404E99 00666C26 RAMDISK have been
loaded, I've seen it on other boot logs!!!
avail ram: 0066A000 0F424000 =
=20
=
=20
Linux/PPC load: console=3DttyS0,9600 root=3D/dev/ram0 rw =
=20
Uncompressing Linux...done. =
=20
Now booting the kernel =
=20
[ 0.000000] Linux version 2.6.23-rc9-dirty (jmgomez@jmgomez-laptop) (gcc
ver8
[ 0.000000] Xilinx ML300 Reference System (Virtex-II Pro) =
=20
[ 0.000000] Zone PFN ranges: =
=20
[ 0.000000] DMA 0 -> 62500 =
=20
[ 0.000000] Normal 62500 -> 62500 =
=20
[ 0.000000] Movable zone start PFN for each node =
=20
[ 0.000000] early_node_map[1] active PFN ranges =
=20
[ 0.000000] 0: 0 -> 62500 =
=20
[ 0.000000] Built 1 zonelists in Zone order. Total pages: 62012 =
=20
[ 0.000000] Kernel command line: console=3DttyS0,9600 root=3D/dev/ram0 r=
w =20
[ 0.000000] Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000 =
=20
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) =
=20
[ 0.000349] Console: colour dummy device 80x25 =
=20
[ 0.004726] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes) =20
[ 0.010854] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes=
) =20
[ 0.117251] Memory: 244224k available (1424k kernel code, 480k data,
1640k i)
[ 0.304888] Mount-cache hash table entries: 512 =
=20
[ 0.315611] NET: Registered protocol family 16 =
=20
[ 0.370262] NET: Registered protocol family 2 =
=20
[ 0.436663] IP route cache hash table entries: 2048 (order: 1, 8192
bytes) =20
[ 0.438058] TCP established hash table entries: 8192 (order: 4, 65536
bytes)=20
[ 0.440252] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) =
=20
[ 0.441291] TCP: Hash tables configured (established 8192 bind 8192) =
=20
[ 0.441332] TCP reno registered =
=20
[ 1.545621] io scheduler noop registered =
=20
[ 1.545703] io scheduler anticipatory registered (default) =
=20
[ 1.545740] io scheduler deadline registered =
=20
[ 1.545963] io scheduler cfq registered =
=20
[ 1.657974] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharingd
[ 1.668865] serial8250.0: ttyS0 at MMIO 0x40401003 (irq =3D 2) is a 1655=
0A =20
[ 1.670637] console [ttyS0] enabled =
=20
[ 3.764034] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
bloe
[ 3.857351] xsysace xsysace.0: Xilinx SystemACE revision 1.0.12 =
=20
[ 3.929487] xsysace xsysace.0: capacity: 986320 sectors =
=20
[ 3.992901] xsa: unknown partition table =
=20
[ 4.049520] tun: Universal TUN/TAP device driver, 1.6 =
=20
[ 4.110425] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> =
=20
[ 4.187993] mice: PS/2 mouse device common for all mice =
=20
[ 4.251498] TCP cubic registered =
=20
[ 4.290639] NET: Registered protocol family 1 =
=20
[ 4.343201] NET: Registered protocol family 17 =
=20
[ 4.400662] VFS: Cannot open root device "ram0" or unknown-block(1,0) =
=20
[ 4.478329] Please append a correct "root=3D" boot option; here are the
availa:
[ 4.578874] fe00 493160 xsa (driver?) =
=20
[ 4.627166] Kernel panic - not syncing: VFS: Unable to mount root fs on
unkn)
[ 4.726623] Rebooting in 180 seconds..
The ramdisk have not been loaded to memory, or anything similar!!!
//**********************************************************///
Linux/PPC load: console=3DttyS0,9600 root=3D/dev/xsa3 rw =20
I've also tried to boot from SystemACE but I've got a partition table error
( xsa: unknown partition table ). I've reformat my CF card for some times,
and nothing have change:
The partition table must be MS-DOS, type 6 on fdisk.
That's the fdisk partition table:
Disco /dev/sdc: 521 MB, 521773056 bytes
17 cabezas, 59 sectores/pistas, 1016 cilindros
Unidades =3D cilindros de 1003 * 512 =3D 513536 bytes
Disk identifier: 0x537c213d
Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sdc1 1 300 150420+ 6 FAT16
/dev/sdc2 301 418 59177 82 Linux swap / Solari=
s
/dev/sdc3 419 1016 299897 83 Linux
0x1B0: 00 00 00 00 00 00 00 00 3D 21 7C 53 00 00 00 01
0x1C0: 01 00 06 10 7B 2B 3B 00 00 00 29 97 04 00 00 00
0x1D0: 41 2C 82 10 7B A1 64 97 04 00 52 CE 01 00 00 00
0x1E0: 41 A2 83 10 FB F7 B6 65 06 00 F2 26 09 00 00 00
0x1F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA
That's the dump of my CF Card maybe some one could send me a dump of yours.
One of my tries, after using the CF Card in the XUPV2P, I get this message:=
=20
El dispositivo no contiene una tabla de particiones DOS v=C3=A1lida ni una
etiqueta de disco Sun o SGI o OSF
Building a new DOS disklabel with disk identifier 0x0eb5b431.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Atenci=C3=B3n: el indicador 0x0000 inv=C3=A1lido de la tabla de particiones=
4 se
corregir=C3=A1 mediante w(rite)
But It didn't repeat anymore.. So I suppose that the CF card isn't valid fo=
r
the SystemAce of the board!! But I don't know why??
I don't know what is the problem, if anyone knows, reply please=20
Thanx
PD: Sorry for writing so large messages but I've included all the info I've
recover..
--=20
View this message in context: http://www.nabble.com/rootfs-problem-kernel-2=
.6-XUPV2P-tp15182195p15182195.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-01-30 13:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-30 13:34 rootfs problem kernel 2.6 XUPV2P greenlean
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).