From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Oliver <oohall@gmail.com>, Sinan Kaya <okaya@codeaurora.org>,
"open list:LINUX FOR POWERPC (32-BIT AND 64-BIT)"
<linuxppc-dev@lists.ozlabs.org>,
"linux-rdma@vger.kernel.org" <linux-rdma@vger.kernel.org>
Subject: Re: RFC on writel and writel_relaxed
Date: Sat, 24 Mar 2018 12:23:46 +1100 [thread overview]
Message-ID: <1521854626.16434.359.camel@kernel.crashing.org> (raw)
In-Reply-To: <20180323163510.GC13033@ziepe.ca>
On Fri, 2018-03-23 at 10:35 -0600, Jason Gunthorpe wrote:
> On Fri, Mar 23, 2018 at 12:52:02AM +1100, Benjamin Herrenschmidt wrote:
>
> > > > - Make writel_relaxed() be a simple store without barriers, and
> > > > readl_relaxed() be "eieio, read, eieio", thus allowing write combining
> > > > to happen between successive writel_relaxed on WC space (no change on
> > > > normal NC space) while maintaining the ordering between relaxed reads
> > > > and writes. The flip side is a (slight) increased overhead of
> > > > readl_relaxed.
> > >
> > > Are there many drivers that actually do writeX() on WC space?
> > > memory-barriers.txt
> > > pretty much says that all bets are off and no ordering guarantees can be assumed
> > > when using readX/writeX on prefetchable IO memory. It seems sketchy enough to
> > > give me some pause, but maybe it works fine elsewhere.
> >
> > I don't know whether any does it, but I want to provide a way for a
> > driver to somewhat reliably obtain write combine semantics without
> > having to hand code endian swap and other horrors involved with using
> > __raw_* accessors.
>
> Many of the drivers in drivers/infiniband work with write combining
> memory.
>
> The usual pattern is a desire to push 32 or 64 bytes to the WC BAR as
> efficiently as possible, ideally in a single PCI-E TLP.
>
> A memcpy_to_wc primitive could probably cover these use cases, no need
> to redesign the IO accessors..
>
> The WC memory is never read, so read/write order is not important to
> any infiniband driver.
>
> What is very important is keeping the WC behavior isolated within the
> spinlock. WC to the same addresses cannot be permitted in this pattern:
>
> writel(addr = 0);
> mmiowmb();
> spin_unlock();
> spin_lock()
> writel(addr = 0);
>
> The CPU must always generate two PCI-E TLPs to the device.
On powerpc you'll never get write combining with writel. So that at
least is covered.
> This is a super performance critical operation for most drivers and
> directly impacts network performance.
>
> Jason
next prev parent reply other threads:[~2018-03-24 1:23 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-21 3:07 RFC on writel and writel_relaxed Sinan Kaya
2018-03-21 3:40 ` Oliver
2018-03-21 13:53 ` Sinan Kaya
2018-03-21 13:58 ` Sinan Kaya
2018-03-26 13:43 ` Arnd Bergmann
2018-03-26 16:00 ` Sinan Kaya
2018-03-21 14:35 ` David Laight
2018-03-21 15:04 ` Sinan Kaya
2018-03-22 5:24 ` Oliver
2018-03-22 8:20 ` Gabriel Paubert
2018-03-22 9:25 ` Oliver
2018-03-22 11:25 ` Gabriel Paubert
2018-03-22 10:37 ` David Laight
2018-03-22 4:24 ` Benjamin Herrenschmidt
2018-03-22 10:15 ` Oliver
2018-03-22 13:52 ` Benjamin Herrenschmidt
2018-03-22 17:51 ` Sinan Kaya
2018-03-23 0:16 ` Benjamin Herrenschmidt
2018-03-23 13:42 ` Sinan Kaya
2018-03-24 1:22 ` Benjamin Herrenschmidt
2018-03-24 15:06 ` Sinan Kaya
2018-03-26 11:44 ` Will Deacon
2018-03-26 12:11 ` okaya
2018-03-26 12:42 ` Sinan Kaya
2018-03-23 16:35 ` Jason Gunthorpe
2018-03-24 1:23 ` Benjamin Herrenschmidt [this message]
2018-03-26 11:08 ` David Laight
2018-03-26 16:54 ` Jason Gunthorpe
2018-03-26 19:44 ` Arnd Bergmann
2018-03-26 20:25 ` Jason Gunthorpe
2018-03-26 20:43 ` Arnd Bergmann
2018-03-26 21:09 ` Jason Gunthorpe
2018-03-26 21:30 ` Arnd Bergmann
2018-03-26 21:46 ` Sinan Kaya
2018-03-26 22:01 ` Benjamin Herrenschmidt
2018-03-26 22:08 ` Sinan Kaya
2018-03-26 22:28 ` Benjamin Herrenschmidt
2018-03-26 22:27 ` Jason Gunthorpe
2018-03-26 22:36 ` Benjamin Herrenschmidt
2018-03-26 22:42 ` Benjamin Herrenschmidt
2018-03-26 22:50 ` Jason Gunthorpe
2018-03-26 23:59 ` Benjamin Herrenschmidt
2018-03-27 1:39 ` Jason Gunthorpe
2018-03-27 7:56 ` Arnd Bergmann
2018-03-27 8:56 ` Benjamin Herrenschmidt
2018-03-27 9:44 ` Arnd Bergmann
2018-03-27 10:00 ` Will Deacon
2018-03-27 11:23 ` Benjamin Herrenschmidt
2018-03-27 12:22 ` okaya
2018-03-27 14:12 ` Jason Gunthorpe
2018-03-27 21:27 ` Benjamin Herrenschmidt
2018-03-27 9:57 ` Will Deacon
2018-03-27 10:05 ` Arnd Bergmann
2018-03-27 10:09 ` Will Deacon
2018-03-27 10:53 ` Arnd Bergmann
2018-03-27 11:02 ` Will Deacon
2018-03-27 11:05 ` Arnd Bergmann
2018-03-27 11:25 ` Benjamin Herrenschmidt
2018-03-27 13:20 ` David Laight
2018-03-27 13:46 ` Sinan Kaya
2018-03-27 14:36 ` Will Deacon
2018-03-27 21:29 ` Benjamin Herrenschmidt
2018-03-28 8:53 ` Will Deacon
2018-03-28 9:00 ` David Laight
2018-03-28 9:09 ` Will Deacon
2018-03-28 9:56 ` Benjamin Herrenschmidt
2018-03-28 9:50 ` Benjamin Herrenschmidt
2018-03-28 9:55 ` Arnd Bergmann
2018-03-28 10:01 ` Benjamin Herrenschmidt
2018-03-28 10:13 ` Will Deacon
2018-03-28 16:57 ` Jason Gunthorpe
2018-03-29 9:19 ` Will Deacon
2018-03-29 14:45 ` Jason Gunthorpe
2018-03-29 14:58 ` David Laight
2018-03-29 16:40 ` Jason Gunthorpe
2018-03-27 21:24 ` Benjamin Herrenschmidt
2018-03-27 11:21 ` Benjamin Herrenschmidt
2018-03-27 9:42 ` Will Deacon
2018-03-27 11:20 ` Benjamin Herrenschmidt
2018-03-27 11:24 ` Will Deacon
2018-03-27 14:24 ` Jason Gunthorpe
2018-03-27 14:16 ` Jason Gunthorpe
2018-03-26 22:00 ` Benjamin Herrenschmidt
2018-03-27 14:46 ` Sinan Kaya
2018-03-27 15:01 ` Jose Abreu
2018-03-27 15:10 ` Will Deacon
2018-03-27 18:54 ` Alexander Duyck
2018-03-27 19:54 ` Arnd Bergmann
2018-03-27 20:46 ` Arnd Bergmann
2018-03-27 21:33 ` Benjamin Herrenschmidt
2018-03-28 0:39 ` Linus Torvalds
2018-03-28 1:03 ` Benjamin Herrenschmidt
2018-03-28 2:51 ` Linus Torvalds
2018-03-28 3:24 ` Sinan Kaya
2018-03-28 4:41 ` Benjamin Herrenschmidt
2018-03-28 6:14 ` Linus Torvalds
2018-03-28 11:41 ` okaya
2018-03-28 15:13 ` Benjamin Herrenschmidt
2018-03-28 15:55 ` David Miller
2018-03-28 16:23 ` Nicholas Piggin
2018-03-28 21:31 ` Benjamin Herrenschmidt
2018-03-28 22:09 ` Nicholas Piggin
2018-03-29 9:20 ` Will Deacon
2018-03-29 13:56 ` Sinan Kaya
2018-03-29 14:04 ` David Miller
2018-03-29 16:29 ` Arnd Bergmann
2018-03-29 16:59 ` Sinan Kaya
2018-03-30 1:40 ` Benjamin Herrenschmidt
2018-04-02 13:01 ` Sinan Kaya
2018-03-28 4:33 ` Benjamin Herrenschmidt
2018-03-28 6:26 ` Linus Torvalds
2018-03-28 6:42 ` Benjamin Herrenschmidt
2018-03-28 6:53 ` Linus Torvalds
2018-03-28 6:56 ` Benjamin Herrenschmidt
2018-03-28 7:11 ` Arnd Bergmann
2018-03-28 7:42 ` Benjamin Herrenschmidt
2018-03-28 9:07 ` Will Deacon
2018-03-28 9:56 ` Benjamin Herrenschmidt
2018-03-28 10:13 ` Aw: " Lino Sanfilippo
2018-03-28 10:20 ` Benjamin Herrenschmidt
2018-03-28 11:30 ` David Laight
2018-03-28 15:12 ` Benjamin Herrenschmidt
2018-03-28 16:16 ` David Laight
2018-03-28 1:21 ` Benjamin Herrenschmidt
2018-03-27 21:35 ` Benjamin Herrenschmidt
2018-03-26 21:26 ` Benjamin Herrenschmidt
-- strict thread matches above, loose matches on Subject: below --
2018-03-27 21:54 Alexander Duyck
2018-03-27 22:35 ` Sinan Kaya
2018-03-27 23:43 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521854626.16434.359.camel@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=jgg@ziepe.ca \
--cc=linux-rdma@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=okaya@codeaurora.org \
--cc=oohall@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).